- No products in the cart.
1 Inch Double Check Valve (32mm)
WRAS & UK Water Reg4 approved double check valve. With 1 Inch female threaded connection. Requires 2no. 32mm Male Thread Adaptor x 1 Inch for connection to 32mm water pipe.
1000 Litre Slimline Bunded Oil Tank
Harlequin 1000 Litre integrally bunded oil tank, moulded from durable medium density polyethylene, with inner tank vent and moulded-in handles for ease of lifting.Tank features bottom outlet (1” BSP female thread),...
100mm Connector for Land Drainage Pipe
Straight connector for 100mm single walled land drainage pipe
Close
100mm Perforated Land Drainage Pipe
A single walled corrugated pipe, manufactured from high density polyethylene. Widely used for the collection & removal of surface water. Pipe is fully perforated and has 3 perforations per corrugation.
100mm Unperforated Land Drainage Pipe
A single walled corrugated pipe, manufactured from high density polyethylene. Widely used as a carrier pipe for surface water drainage. Available in 50m coils.
100mm x 75mm Cast Effect Rectangular Downpipe
Socketed with ears. For use with 170mm Deepstyle Cast Effect Guttering.
105mm Cast Effect Round Downpipe
Socketed with ears. For use with 170mm Deepstyle Cast Effect Guttering.
Close
106mm Prostyle Cast Iron Effect Gutter
Sleek lines and modern styling provide a contemporary finish with a quality Cast Iron look and feel. Offering a modern twist on heritage styling, the Prostyle system is ideally suited...
11.25 Degree Bend (160mm)
Single socketed bend for 160mm undergorund pipe
1100 Litre Slimline Bunded Oil Tank
Harlequin 1100 Litre integrally bunded oil tank, moulded from durable medium density polyethylene, with inner tank vent and moulded-in handles for ease of lifting.Tank features bottom outlet (1” BSP female thread),...
110mm Black PVC Pipe x 3m
A UV stable pipe with a pushfit ring seal suitable for use as either a downpipe (particularly with Brett Martin 170mm Deepstyle High Capacity Guttering) or in a soil stack system....
110mm Cast Effect Soil Pipe 2.5m
Incorporating traditional cast iron detailing with all the benefits of a plastic system, Cast Effect Soil pipe complements any Cast Effect Rainwater System. With a realistic cast iron finish, this system provides...
110mm Coupler
Double socketed.
110mm Perforated Socketed Pipe
*Available for Local Delivery and Collection only* A half perforated pipe suitable for use in domestic soakaway systems or for surface water drainage. Socketed at one end for easy jointing....
Close
110mm Single Socket Pipe
*Available for Local Delivery and Collection only*
Available in lengths of 3 metres or 6 metres. Socketed at one end for easy jointing.
110mm Soil Pipe Weathering Collar (Cast Effect)
For use where a soil vent pipe penetrates the roof covering, this fitting diverts rainwater away.
110mm x 5" Adaptor Coupling
Flexible rubber adaptor coupling for connecting pipes with an different outside diameter, in non-pressure systems. This coupler will join a pipe with an outside diameter of 110-121mm to a pipe...
110mm x 7" Adaptor Coupling
Flexible rubber adaptor coupling for connecting pipes with an different outside diameter, in non-pressure systems. This coupler will join a pipe with an outside diameter of 110-122mm to a pipe...
110mm/4" Drain Coupler
Flexible rubber coupling, ideal as a repair joint, for connecting pipes with an outside diameter between 100 to 115mm in non-pressure systems. Drain Couplings comprise a moulded EPDM sleeve which is attached...
112.5 degree Branch (68mm Cast Effect)
Branch for 68mm Round Cast Effect Downpipe with a 112.5 degree spur. Combine with a 112.5 degree Spigot Bend.
112.5 degree Soil Pipe Bend (110mm Cast Effect)
112.5 degree bend 110mm Cast Iron Effect Soil System Pipe.
Available as Single Socket only.
Black
112.5º Bend (110mm PVC)
Single ring seal pushfit socket bend for use in 110mm PVC Rainwater and Soil stack assemblies.
Black
112.5º Bottom Offset Bend (110mm PVC)
112.5 degree bend for use as bottom half of downpipe offset. With single solvent weld socket and one plain end.
Black
112.5º Top Offset Bend (110mm PVC)
112.5 degree bend with one ring-seal push-fit socket and one solvent weld socket. For use as part of an offset in a 110mm Rainwater System.
112mm Roundstyle Black PVC Gutter
Roundstyle is a traditional 112mm half round system suitable for the domestic housing market. The Roundstyle system utilises 68mm round downpipe and fittings.
Width 112mm Depth 51mm
Length 4m
Colour Black
Close
112mm Roundstyle Cast Iron Effect Gutter
Width 112mm Depth 51mm
Available in 2 metre and 4 metre lengths.
112½ degree Downpipe Bend (105mm Cast Effect)
Single socketed bend for use with Brett Martin 105mm Cast Effect Round Downpipe.
Close
112½º Eared Spigot Offset Bend (68mm Cast Effect)
Offset bend with fixing lug and a spigot tail which fits inside a plain ended piece of 68mm Round Cast Effect Downpipe. Available in left-handed or right-handed orientation.
Black
112½º Offset Downpipe Bend (68mm Round PVC)
Use two of these 112½º bends to return down pipe to your wall. Use a cut length of down pipe in between, depending on your soffit depth.
112½º Spigot Offset Bend (65mm Cast Effect)
112½ degree Bend with a Spigot for creating your own offsets for Brett Martin 65mm Square Cast Effect Downpipe.
112½º Spigot Offset Bend (68mm Cast Effect)
Offset bend with spigot tail which fits inside a plain ended piece of 68mm Round Cast Effect Downpipe.
115mm Deepstyle Black PVC Gutter
A semi elliptical gutter that offers more effective rainwater drainage on larger roof areas. Offers an increase of 50% in flow capacity compared to the 112mm Roundstyle, potentially reducing the number of downpipe...
115mm Deepstyle Cast Iron Effect Gutter
Combining period Cast Iron detailing and styling, Deepstyle is a higher capacity semi elliptical rainwater system, providing greater drainage efficiency on larger roof areas. Width 115mm Depth 75mm Available in 4...
115mm Offset (105mm Cast Effect)
Preformed 112½º "swan neck" bend for use with Brett Martin 105mm Cast Effect Round Downpipe. Offset projection is measured from centre to centre.
115mm Offset (68mm Cast Effect)
112½º "swan neck" bend to return downpipe to your wall. For sizing, measure your soffit depth and then select the next size up.
115mm Square Offset (65mm Cast Effect)
112½º "swan neck" bend to return downpipe to your wall. For sizing, measure your soffit depth and then select the next size up.
Close
11¼ Degree Bend (110mm)
Bend for 110mm underground pipe. Available single socketed or double socketed.
12 Gallon Water Trough
The DT10 (53L/12 Gal) water trough is manufactured from tough, impact resistant and UV protected polyethylene which is designed with smooth edges for animal safety. The single reservoir and low profile...
Close
12-Person Economy Sewage Treatment Plant
Suitable for up to 12 persons, the Clearwater Economy sewage treatment plant uses the well-proven aerobic biological process. The treatment process takes place in three stages; Coarse solids are filtered...
Close
12.5mm (1/2") Torsino Plus Hose
12.5mm/½" (Internal Diameter) Garden hose. The Torsino Plus Anti Torsion Hose uses an advanced manufacturing process to create a knot free, kink resistant flexible PVC braided hose. PHTHLATE-FREE and applicable...
1200 Litre Low Profile Bunded Oil Tank
Harlequin 1200 Litre integrally bunded oil tank, moulded from durable medium density polyethylene, with inner tank vent and moulded-in handles for ease of lifting.Tank features bottom outlet (1” BSP female thread),...
1225 Litre Slimline Bunded Oil Tank
Harlequin 1225 Litre integrally bunded Slimline oil tank, ideal for use when space is at a premium and additional tank technology is not a requirement. Made from Medium Density Polyethylene...
1300 Litre Slimline Bunded Oil Tank
Harlequin 1300 Litre integrally bunded oil tank, moulded from durable medium density polyethylene, with inner tank vent and moulded-in handles for ease of lifting.Tank features bottom outlet (1” BSP female thread),...
Black
135 degree Angle (Deepstyle PVC)
Angled corner fitting for 115mm Black Deepstyle PVC gutter. Double socketed with integral flexible clips that allow quick and easy snap together assembly on to the gutter length.
135 degree Branch (68mm Cast Effect)
Branch for 68mm Round Cast Effect Downpipe with a 135 degree spur. Combine with a 135 degree Bend.
Black
135 degree Gutter Angle (Roundstyle PVC)
Angled corner fitting for 112mm Black Roundstyle PVC gutter.
135 degree Gutter Angle - Deepstyle (Cast Iron Effect)
Fits over gutter ends to direct water flow around a corner.
135 degree gutter angle - Roundstyle (Cast Iron Effect)
Fits over gutter ends to direct water flow around a corner.
135 degree Soil Pipe Bend (110mm Cast Effect)
112.5 degree bend 110mm Cast Iron Effect Soil System Pipe.
Available as Double Socket only.
135° Bend (68mm Cast Effect)
135 degree bend for use with 68mm Round Cast Effect Downpipe.
135° Spigot Offset Bend (65mm Cast Effect)
135 degree bend with spigot for creating your own offset with Brett Martin 65mm Square Cast Effect Downpipe.
Black
Close
135º Bend (110mm PVC)
Pushfit ring seal socketed bend for use in 110mm PVC Rainwater and Soil stack assemblies. Available single socketed or double socketed.
1400 Litre Horizontal Bunded Oil Tank
Harlequin 1400 Litre integrally bunded oil tank, moulded from durable medium density polyethylene, with inner tank vent and moulded-in handles for ease of lifting.Tank features bottom outlet (1” BSP female thread),...
Close
150mm Twin Wall
Plain ended pipe (Collar and ring seals sold separately). Available unperforated or perforated.
Inside diameter 150mm
Outside diameter 178mm
Length 6 metres
150mm 15 Degree Twin Wall Bend
Double socket bend for 150mm (internal)/178mm (external) twin wall pipe. For a watertight seal optional sealing rings are available (2 required per bend).
150mm 30 Degree Twin Wall Bend
Double socket bend for 150mm (internal)/178mm (external) twin wall pipe. For a watertight seal optional sealing rings are available (2 required per bend).
150mm 45 Degree Twin Wall Bend
Double socket bend for 150mm (internal)/178mm (external) twin wall pipe. For a watertight seal optional sealing rings are available (2 required per bend).
150mm 90 Degree Twin Wall Bend
Double socket bend for 150mm (internal)/178mm (external) twin wall pipe. For a watertight seal optional sealing rings are available (2 required per bend).
150mm Offset (105mm Cast Effect)
Preformed 112½º "swan neck" bend for use with Brett Martin 105mm Cast Effect Round Downpipe. 150mm projection is from centre to centre.
150mm Offset (68mm Cast Effect)
112½º "swan neck" bend to return downpipe to your wall. For sizing, measure your soffit depth and then select the next size up.
150mm Square Offset (65mm Cast Effect)
112½º "swan neck" bend to return downpipe to your wall. For sizing, measure your soffit depth and then select the next size up.
150mm Twin Wall "Y" Branch
Triple socket branch with a 45 degree spur for 150mm (internal)/178mm (external) twin wall pipe. For a watertight seal optional sealing rings are available (3 required per branch).
150mm Twin Wall Collar
For joining 150mm (internal)/178mm (external) twin wall pipes. Optional sealing rings available for watertight connection (2 required per collar).
150mm Twin Wall Sealing Ring
Seals ensure a waterproof and secure connection when used with 150mm (ID)/178mm (OD) twin wall pipe.
150mm Twin Wall Tee Branch
Triple socket branch with 90 degree spur for 150mm (internal)/178mm (external) twin wall pipe. For a watertight seal optional sealing rings are available (3 required per branch).
15mm Copper Adaptor (20mm)
Simply insert into fitting to join 20mm (OD) MDPE pipe to 15mm above ground (Table X) or below ground (Table Y) copper pipe.
160 to 110mm Level Invert Reducer
Transition fitting to join 110mm and 160mm pipe. With a 160mm pipe spigot and a 110mm socket.
160 to 110mm Reducing "Y" Branch
Triple Socketed Reducing branch with a 45 degree spur, which allows connection of 110mm pipework into a 160mm system.
160 to 110mm Reducing Tee Branch
Triple Socketed reducing branch with an 87½ degree spur for connection of 110mm pipework into a 160mm system.
160mm Connector for Land Drainage Pipe
Straight connector for 160mm single walled land drainage pipe
160mm Multi-Junction for Land Drainage Pipe
Cut out at one end to connect from 60 - 160mm land drainage pipe to 160mm land drainage pipe.
160mm Perforated Land Drainage Pipe
Single walled corrugated pipe, manufactured from high density polyethylene. Widely used for the collection & removal of surface water. Pipe is fully perforated and has 3 perforations per corrugation. Available...
Close
160mm Single Socket Pipe
*Available for Local Delivery and Collection only*
Available in 3 metre and 6 metre lengths. Socketed at one end for easy jointing.
160mm Unperforated Land Drainage Pipe
Single walled corrugated pipe, manufactured from high density polyethylene. Widely used as a carrier pipe for surface water drainage.
Available in 50m coils.
160mm x 7-8" Adaptor Coupling
Flexible rubber adaptor coupling for connecting pipes with an different outside diameter, in non-pressure systems. This coupler will join a pipe with an outside diameter of 160-180mm to a pipe...
160mm/6" Drain Coupler
Flexible rubber coupling, ideal as a repair joint, for connecting pipes with an outside diameter between 150 to 165mm in non-pressure systems. Drain Couplings comprise a moulded EPDM sleeve which is attached...
170mm 90° Black PVC Gutter Angle
90 degree corner fitting for Brett Martin 170mm Black PVC Deepstyle guttering.
170mm Black PVC Deepstyle Gutter
A high performance industrial rainwater system with greater drainage capacity. The larger profile enables roofs to be drained more efficiently and effectively, making the system ideal for large commercial properties,...
170mm Black PVC External Stopend
End cap for Brett Martin 170mm Black PVC Deepstyle guttering. Fits over gutter end.
170mm Black PVC Fascia Bracket
Gutter support bracket for attachment to fascia board or rafter end. For use with Brett Martin 170mm Black PVC Deepstyle gutter.
170mm Black PVC Internal Stopend
End cap for Brett Martin 170mm Black PVC Deepstyle guttering. Fits inside socket
170mm Black PVC Running Outlet
Double socketed outlet fitting for Brett Martin 170mm Black PVC Deepstyle guttering. Outlet size 110mm
170mm Black PVC Union Bracket
Joining bracket for Brett Martin 170mm Black PVC Deepstyle guttering. With 2 fixing points for fascia board attachment and optional centre fixing point (not drilled).
Close
170mm Cast Effect Deepstyle Gutter
This High Capacity Cast Iron Style Rainwater System is ideally suited to traditionally styled buildings with larger roof areas. Period style detailing combined with very high levels of roof drainage...
Close
19mm (3/4") Torsino Hose
19mm/¾" (Internal Diameter) garden hose. The Torsino NTS (No Torsion System) Hose uses an advanced manufacturing process to create a knot free, kink resistant flexible PVC braided hose. This is...
1½ Inch Double Check Valve (50mm)
WRAS & UK Water Reg4 approved double check valve. With 1½ inch female threaded connection. Requires 2no. 50mm Male Thread Adaptor x 1½ inch for connection to 50mm water pipe.
2 Inch Double Check Valve (63mm)
WRAS & UK Water Reg4 approved double check valve. With 2 inch female threaded connection. Requires 2no. 63mm Male Thread Adaptor x 2 inch for connection to 63mm water pipe.
2000 Litre Horizontal Bunded Oil Tank
Harlequin 2000 Litre integrally bunded Horizontal oil tank, suitable for the storage of heating oil in a domestic or commercial set up. Made from Medium Density Polyethylene (MDPE), this tank is lightweight, durable,...
Close
20mm Blue MDPE Water Pipe
SC80 (PE80) Polyethylene Light Blue Pipe for the supply of clean water.
12 bar pressure rating (SDR9)
Outside diameter 20mm (15.4mm internal)
Available in Coil sizes: 25m, 50m, 100m, 150m
225mm 15 Degree Twin Wall Bend
Double socket bend for 225mm (internal)/268mm (external) twin wall pipe. For a watertight seal optional sealing rings are available (2 required per bend)
225mm 30 Degree Twin Wall Bend
Double socket bend for 225mm (internal)/268mm (external) twin wall pipe. For a watertight seal optional sealing rings are available (2 required per bend).
225mm 45 Degree Twin Wall Bend
Double socket bend for 225mm (internal)/268mm (external) twin wall pipe. For a watertight seal optional sealing rings are available (2 required per bend).
225mm 90 Degree Twin Wall Bend
Double socket bend for 225mm (internal)/268mm (external) twin wall pipe. For a watertight seal optional sealing rings are available (2 required per bend).
225mm to 150mm Twin Wall Reducing "Y" Branch
Triple socket branch for 225mm (ID)/268mm (OD) twin wall pipe with a 45 degree spur for 150mm (ID)/178mm (OD) twin wall pipe. For a watertight seal optional sealing rings are available (2...
225mm to 150mm Twin Wall Reducing Tee Branch
Triple socket branch for 225mm (ID)/268mm (OD) twin wall pipe with a 90 degree spur for 150mm (ID)/178mm (OD) twin wall pipe. For a watertight seal optional sealing rings are available (2...
Close
225mm Twin Wall
Plain ended pipe (Collar and ring seals sold separately). Available unperforated or perforated.
Inside diameter 225mm
Outside diameter 268mm
Length 6 metre
225mm Twin Wall "Y" Branch
Triple socket branch with 45 degree spur for 225mm (internal)/268mm (external) twin wall pipe. For a watertight seal optional sealing rings are available (3 required per branch).
225mm Twin Wall Collar
For joining 225mm (internal)/268mm (external) twin wall pipes. Optional sealing rings available for watertight connection (2 required per collar).
225mm Twin Wall Sealing Ring
Seals ensure a waterproof and secure connection when used with 225mm (ID)/268mm (OD) twin wall pipe.
225mm Twin Wall Tee Branch
Triple socket branch with 90 degree spur for 225mm (internal)/268mm (external) twin wall pipe. For a watertight seal optional sealing rings are available (3 required per branch).
Close
22½ Degree Bend (110mm)
Bend for 110mm underground pipe. Available single socketed or double socketed.
22½ Degree Bend (160mm)
Single socketed bend for 160mm undergorund pipe
230mm Offset (105mm Cast Effect)
Preformed 112½º "swan neck" bend for use with Brett Martin 105mm Cast Effect Round Downpipe. 230mm projection is centre to centre.
230mm Offset (68mm Cast Effect)
112½º "swan neck" bend to return downpipe to your wall. For sizing, measure your soffit depth and then select the next size up.
250 Litre ATV Tipping Trailer
The JFC 250L ATV Trailer is manufactured from tough, impact resistant polyethylene and is fitted with 2 pneumatic wheels, a galvanised chassis and an easy-to-use tipping mechanism. The heavy duty...
Close
250 Litre Tipping Wheelbarrow
The JFC 250L Tipping Wheelbarrow is perfect for use both on the farm, the yard and for general duties. The innovative tipping design means that it can be tipped with minimal...
2500 Litre Horizontal Bunded Oil Tank
Harlequin 2500 Litre integrally bunded Horizontal oil tank, suitable for the storage of heating oil in a domestic or commercial set up. Made from Medium Density Polyethylene (MDPE), this tank is lightweight, durable,...
Close
25mm Blue MDPE Water Pipe
SC80 (PE80) Polyethylene Light Blue Pipe for the supply of clean water.
12 bar pressure rating (SDR11)
Outside diameter 25mm (20.4mm internal)
Available in Coil sizes: 25m, 50m, 100m, 150m
Close
25mm Microflex Primo Duo Heating Pipe Kit
Double, flexible, pre-insulated, self-compensating, underground pipe especially suitable for heating water, but also for (hot) potable water, wastewater and other fluids. 25mm Microflex Primo Duo consits of two PE-X transport...
Close
25mm Microflex Quadro Pipe
A quadruple, flexible, pre-insulated, self-compensating, underground pipe with two heating water pipes, a sanitary hot water pipe and a circulation loop pipe. These are enveloped within CFC-free foam insulation, and encased in...
280mm 90 Degree Shallow Access Inspection Chamber Base
Unique 90 degree design. For use with 110mm pipework. Suitable for inverts of up to 600mm.
Depth 205mm
280mm Shallow Access Inspection Chamber Base
For use with 110mm pipework, with straight through inlet and outlet, plus one inlet each side at 45 degrees. Supplied with 2 socket plugs. Suitable for inverts of up to 600mm.
Depth 205mm
280mm Shallow Access Inspection Chamber Riser
Raising piece for inspection chamber. Robust ribbed design with seals to provide watertight fit. Height 185mm. Only two required to achieve 600mm maximum invert (with base and lid & frame).
28mm Copper Pipe Adaptor Set (32mm)
Simply insert into fitting to join PE pipe to above ground (Table X) or below ground (Table Y) copper pipe.
Available to join 32mm (OD) PE to 28mm Copper
30 Gallon Fast Fill Water Trough
The DT30FF (136L/30 Gal) premium water trough is manufactured from tough, impact resistant polyethylene and has a smooth black polished finish designed specifically for animal safety. The trough features an...
300mm 15 Degree Twin Wall Bend
Double socket bend for 300mm (internal)/353mm (external) twin wall pipe. For a watertight seal optional sealing rings are available (2 required per bend).
300mm 30 Degree Twin Wall Bend
Double socket bend for 300mm (internal)/353mm (external) twin wall pipe. For a watertight seal optional sealing rings are available (2 required per bend).
300mm 45 Degree Twin Wall Bend
Double socket bend for 300mm (internal)/353mm (external) twin wall pipe. For a watertight seal optional sealing rings are available (2 required per bend).
300mm 90 Degree Twin Wall Bend
Double socket bend for 300mm (internal)/353mm (external) twin wall pipe. For a watertight seal optional sealing rings are available (2 required per bend).
300mm C250 Gully Grate
*Heavy item - Available for Local Delivery/Collection only* For use with 300mm diameter gully pots. 25 Tonne safe test load hinged grating suitable for carriageway applications (not exceeding 500mm from...
300mm Square Recessed Cover for Screed Infill
10 Tonne (GLVW) loading recessed covers designed to be in-filled with a screed or concrete, featuring four locking screws and a rubber neoprene seal to prevent odour egress. Ideal for indoor...
300mm to 150mm Twin Wall Reducing "Y" Branch
Triple socket branch for 300mm (ID)/353mm (OD) twin wall pipe with a 45 degree spur for 150mm (ID)/178mm (OD) twin wall pipe. For a watertight seal optional sealing rings are available (2...
300mm to 150mm Twin Wall Reducing Tee Branch
Triple socket branch for 300mm (ID)/353mm (OD) twin wall pipe with a 90 degree spur for 150mm (ID)/178mm (OD) twin wall pipe. For a watertight seal optional sealing rings are available (2...
300mm to 225mm Twin Wall Reducing "Y" Branch
Triple socket branch for 300mm (ID)/353mm (OD) twin wall pipe with a 45 degree spur for 225mm (ID)/268mm (OD) twin wall pipe. For a watertight seal optional sealing rings are available.
300mm to 225mm Twin Wall Reducing Tee Branch
Triple socket branch for 300mm (ID)/353mm (OD) twin wall pipe with 90 a degree spur for 225mm (ID)/268mm (OD) twin wall pipe. For a watertight seal optional sealing rings are available...
Close
300mm Twin Wall
Plain ended pipe (Collar and ring seals sold separately). Available unperforated or perforated.
Inside diameter 300mm
Outside diameter 353mm
Length 6 metre
300mm Twin Wall "Y" Branch
Triple socket branch with a 45 degree spur for 300mm (internal)/353mm (external) twin wall pipe. For a watertight seal optional sealing rings are available (3 required per branch).
300mm Twin Wall Collar
For joining 300mm (internal)/353mm (external) twin wall pipes. Optional sealing rings available for watertight connection (2 required per collar).
300mm Twin Wall Sealing Ring
Seals ensure a waterproof and secure connection when used with 300mm (ID)/353mm (OD) twin wall pipe.
300mm Twin Wall Tee Branch
Triple socket branch with 90 degree spur for 300mm (internal)/353mm (external) twin wall pipe. For a watertight seal optional sealing rings are available (3 required per branch).
305mm Offset (105mm Cast Effect)
Preformed 112½º "swan neck" bend for use with Brett Martin 105mm Cast Effect Round Downpipe. 305mm projection is from centre to centre.
305mm Offset (68mm Cast Effect)
112½º "swan neck" bend to return downpipe to your wall. For sizing, measure your soffit depth and then select the next size up.
315mm Shallow Access Inspection Chamber Base
Suitable for inverts of up to 600mm, for use with 110mm pipework. Features straight through inlet and outlet, with an inlet each side at 90 degrees, plus an inlet each...
315mm Shallow Access Inspection Chamber Riser
Raising piece for 315mm diameter Shallow Access Inspection chamber. Robust ribbed design with seals to provide watertight fit. Height 185mm. Only two required to achieve 600mm maximum invert (with base and lid...
Close
32mm Blue MDPE Water Pipe
SC80 (PE80) Polyethylene Light Blue Pipe for the supply of clean water.
12 bar pressure rating (SDR11)
Outside diameter 32mm (26mm internal)
Available in Coil sizes: 25m, 50m, 100m, 150m
Close
32mm Microflex Primo Duo Heating Pipe Kit
Double, flexible, pre-insulated, self-compensating, underground pipe especially suitable for heating water, but also for (hot) potable water, wastewater and other fluids. 32mm Microflex Primo Duo consits of two PE-X transport...
Close
32mm Microflex Quadro Pipe
A quadruple, flexible, pre-insulated, self-compensating, underground pipe with two heating water pipes, a sanitary hot water pipe and a circulation loop pipe. These are enveloped within CFC-free foam insulation, and encased in...
375mm Twin Wall
Available unperforated. Price for perforated available on request. Inside diameter 375mm. Outside diameter 426mm. 6 metre lengths. Collar and ring seals sold separately.
375mm Twin Wall Collar
For joining 375mm (internal)/426mm (external) twin wall pipes. Optional sealing rings available for watertight connection (2 required per collar).
375mm Twin Wall Sealing Ring
Seals ensure a waterproof and secure connection when used with 375mm (ID)/426mm (OD) twin wall pipe.
380mm Offset (105mm Cast Effect)
Preformed 112½º "swan neck" bend for use with Brett Martin 105mm Cast Effect Round Downpipe. 380mm projection is from centre to centre.
380mm Offset (68mm Cast Effect)
112½º "swan neck" bend to return downpipe to your wall. For sizing, measure your soffit depth and then select the next size up.
385 x 320mm C250 Gully Grate
*Heavy item - Available for Local Delivery/Collection only* For use with 300mm diameter gully pots. 25 Tonne safe test load hinged grating BSI Kitemark Certified to BS EN124:1994. Constructed of...
Blue
Green
Close
4 Litre Micro Drink Bowl
The DBL4 drink bowl is manufactured from tough, impact resistant polyethylene and has a smooth finish and a curved design specifically for animal safety. The drink bowl is designed with...
400 Litre ATV Tipping Trailer
The JFC 400L ATV Trailer is ideally suited for ATV's or Quad bikes. The 400L tipping trailer is manufactured from tough, impact resistant polyethylene and is fitted with 2 pneumatic wheels, a galvanised...
400 Litre Tipping Wheelbarrow
The JFC 400L Tipping Wheelbarrow is perfect for use both on the farm, the yard and for general duties. The innovative tipping design means that it can be tipped with minimal...
45 Degree "Y" Branch (110mm)
Triple Socketed equal junction with a 45 degree spur.
Close
45 Degree Bend (110mm)
Bend for 110mm underground pipe. Available single socketed or double socketed.
45 Degree Bend (160mm)
Single Socketed bend for 160mm underground pipe.
45-degree"Y" Branch (160mm)
Triple Socketed Equal junction with a 45-degree spur.
450mm diameter B125 Ductile Iron Cover & Frame
12.5 Tonne safe test load cover and frame suitable for car parks and footways, constructed of ductile iron for improved weight to strength ratio. Slide-out units are un-sealed to allow...
Close
450mm Inspection Chamber Base
450mm diameter Inspection chamber base with 5 inlets, and 1 outlet, supplied with 3 socket plugs. For use with either 110mm and 160mm pipework (160mm option features two 110mm inlets). Suitable...
450mm Inspection Chamber Cover & Frame
Drivway duty secured lid in frame for 450mm diameter access chamber. Suitable for driveway use (withstands 50kN). Bedding frame in concrete recommended.
450mm Inspection Chamber Ring Seal
Creates a watertight fit from base to riser and riser to riser.
Close
450mm Inspection Chamber Riser
Raising piece for 450mm diameter inspection chamber. Effective height 300mm. Sealing ring to enusre watertightness also available.
450mm Square Recessed Cover for Screed Infill
5 Tonne (Gross Plated Weight) loading selaed & locked recessed cover designed to be in-filled with a screed or concrete, recommended for indoor use. Fully galvanised tray with a polypropylene square to...
450mm Twin Wall
Plain ended pipe (Collar and ring seals sold separately). Available unperforated only.
Inside diameter 450mm
Outside diameter 512mm
Length 6 metre
450mm Twin Wall Collar
For joining 450mm (internal)/512mm (external) twin wall pipes. Optional sealing rings available for watertight connection (2 required per collar).
450mm Twin Wall Sealing Ring
Seals ensure a waterproof and secure connection when used with 450mm (ID)/512mm (OD) twin wall pipe.
450mm x 450mm Duct Access Box
Lightweight and easy to install duct access chamber section with pre-trepanned duct entry points accepting 63mm, 90mm, 110mm, 120mm, 145mm and 160mm OD ducting for multiple applications.Interlocking edges for stacking...
455mm Offset (105mm Cast Effect)
Preformed 112½º "swan neck" bend for use with Brett Martin 105mm Cast Effect Round Downpipe. 455mm projection is from centre to centre.
455mm Offset (68mm Cast Effect)
112½º "swan neck" bend to return downpipe to your wall. For sizing, measure your soffit depth and then select the next size up.
50/63mm Coiled Electric Duct x 50m
An unperforated, coiled twin wall pipe complete with jointing collar and drawstring.
Internal Diameter 50mm
Outside Diameter 63mm
Coil Length 50m
Manufactured to BSEN50086-2.4.
50/63mm Coiled Water Duct x 50m
An unperforated, coiled twin wall pipe complete with jointing collar and drawstring, for use as ducting for water pipes.
Internal Diameter 50mm
Outside Diameter 63mm
Coil Length 50m
500 Litre ATV Tipping Trailer
The JFC 500L ATV Trailer is ideally suited for ATVs or Quad bikes. The 500L tipping trailer is manufactured from tough, impact resistant polyethylene and is fitted with 2 pneumatic wheels, a...
500 Litre Tipping Wheelbarrow
The JFC 500L Tipping Wheelbarrow is perfect for use both on the farm, the yard and for general duties. The innovative tipping design means that it can be tipped with minimal...
Close
50mm Blue MDPE Water Pipe
SC80 (PE80) Polyethylene Light Blue Pipe for the supply of clean water.
12 bar pressure rating (SDR11)
Outside diameter 50mm (40mm internal)
Available in Coil sizes: 25m, 50m, 100m
50mm Plinth Offset with Lugs (68mm Cast Effect)
Plinth offset ideal for stepping out over brick plinth. With fixing lugs.
50mm Plinth Square Offset (65mm Cast Effect)
With lugs.
Close
6-Person Economy Sewage Treatment Plant
Suitable for properties of up to 4 bedrooms/6 persons. the Clearwater Economy sewage treatment plant uses the well-proven aerobic biological process. The treatment process takes place in three stages; Coarse...
600 x 450mm Square Recessed Cover for Screed Infill
10 Tonne (GLVW) loading recessed covers designed to be in-filled with a screed or concrete, featuring four locking screws and a rubber neoprene seal to prevent odour egress. Ideal for indoor...
600mm Square Recessed Cover for Screed Infill
10 Tonne (GLVW) loading recessed covers designed to be in-filled with a screed or concrete, featuring four locking screws and a rubber neoprene seal to prevent odour egress. Ideal for indoor...
600mm Twin Wall
Plain ended pipe (Collar and ring seals sold separately). Available unperforated only.
Inside diameter 600mm
Outside diameter 680mm
Length 6 metre
600mm Twin Wall Collar
For joining 600mm (internal)/680mm (external) twin wall pipes. Optional sealing rings available for watertight connection (2 required per collar).
600mm Twin Wall Sealing Ring
Seals ensure a waterproof and secure connection when used with 600mm (ID)/680mm (OD) twin wall pipe.
600mm x 450mm A15 Cover & Frame
*Heavy item - Available for Local Delivery/Collection only* 1.5 Tonne safe test load Light Duty grey iron cover and frame suitable for pedestrian and pedal cyclist areas. Coated black finish....
600mm x 450mm B125 Ductile Iron Cover & Frame
*Heavy item - Available for Local Delivery/Collection only* 12.5 Tonne safe test load cover and frame suitable for car parks and footways, constructed of ductile iron for improved weight to...
600mm x 450mm Block Paviour Cover
10 Tonne (Gross Plated Weight) loading galvanised recessed manhole cover with polypropylene frame, which can be filled with block paving or paving slab (no greater than 50mm thickness) for driveway and patio...
600mm x 450mm D400 Ductile Iron Cover & Frame
*Heavy item - Available for Local Delivery/Collection only* 40 Tonne safe test load cover and frame suitable for carriageway and fast moving traffic. Constructed of ductile iron for improved weight...
600mm x 450mm Duct Access Box
Lightweight and easy to install duct access chamber section with pre-trepanned duct entry points accepting 63mm, 90mm, 110mm, 120mm, 145mm and 160mm OD ducting for multiple applications.Interlocking edges for stacking...
600mm x 600mm A15 Cover & Frame
*Heavy item - Available for Local Delivery/Collection only* 1.5 Tonne safe test load Light Duty grey iron cover and frame suitable for pedestrian and pedal cyclist areas. Coated black finish....
600mm x 600mm B125 Ductile Iron Cover & Frame
*Heavy item - Available for Local Delivery/Collection only* 12.5 Tonne safe test load cover and frame suitable for car parks and footways, constructed of ductile iron for improved weight to...
600mm x 600mm D400 Ductile Iron Cover & Frame
*Heavy item - Available for Local Delivery/Collection only* 40 Tonne safe test load cover and frame suitable for carriageway and fast moving traffic. Constructed of ductile iron for improved weight...
600mm x 600mm Duct Access Box
Lightweight and easy to install duct access chamber section with pre-trepanned duct entry points accepting 63mm, 90mm, 110mm, 120mm, 145mm and 160mm OD ducting for multiple applications.Interlocking edges for stacking...
Close
63mm Blue MDPE Water Pipe
SC80 (PE80) Polyethylene Light Blue Pipe for the supply of clean water.
12 bar pressure rating (SDR11)
Outside diameter 63mm (51mm internal)
Available in Coil sizes: 25m, 50m, 100m
650 Litre Slimline Bunded Oil Tank
Harlequin 650 Litre integrally bunded Slimline oil tank, ideal for use when space is at a premium and additional tank technology is not a requirement. Made from Medium Density Polyethylene...
Close
65mm Square Cast Effect Downpipe
Socketed square downpipe with fixing lugs for use with 106mm Cast Effect Prostyle Gutter.
Available in lengths of 1.8m or 2.5m.
Close
68mm Round Black PVC Downpipe
68mm diameter PVC gloss finish round downpipe. Plain ended.
Colour Black
Length 2.5m or 4m
75mm Offset (68mm Cast Effect)
112½º "swan neck" bend to return downpipe to your wall. For sizing, measure your soffit depth and then select the next size up.
75mm Square Offset (65mm Cast Effect)
112½º "swan neck" bend to return downpipe to your wall. For sizing, measure your soffit depth and then select the next size up.
80mm Connector for Land Drainage Pipe
Straight connector for 80mm single walled land drainage pipe
Close
80mm Perforated Land Drainage Pipe
A single walled corrugated pipe, manufactured from high density polyethylene. Widely used for the collection & removal of surface water. Pipe is fully perforated and has 3 perforations per corrugation....
Close
87½ Degree Bend (110mm)
Bend for 110mm underground pipe. Available single socketed or double socketed.
Close
87½ Degree Bend (160mm)
Bend for 160mm underground pipe. Available single socketed or double socketed.
87½ Degree Rest Bend (110mm)
Double socketed bend with a longer radius, and rest stand. For use at the foot of vertical soil stacks.
87½ Degree Tee Branch (110mm)
Triple Socketed equal Junction with an 87½ degree spur.
87½ Degree Tee Branch (160mm)
Triple Socketed Equal branch for 160mm pipework with an 87½ degree spur.
Close
9-Person Economy Sewage Treatment Plant
Sewage treatment plant suitable for properties of up to 9 persons. The Clearwater Economy sewage treatment plant uses the well-proven aerobic biological process. The treatment process takes place in three stages;...
90 degree Access Bend (110mm Cast Effect)
90 degree bend with rodding access point for 110mm Cast Iron Effect Soil System Pipe.
Available as Single Socket only.
Black
90 degree Angle (Deepstyle PVC)
Corner fitting for 115mm Black Deepstyle PVC gutter. Double socketed with sealed internal fixing points to prevent the necessity of handed versions.
90 Degree Elbow (20mm)
90 degree elbow for 20mm (OD) water pipe. Designed to withstand working pressures of up to 16bar.
90 Degree Elbow (25mm)
90 degree elbow to suit 25mm (OD) PE pipe. Designed to withstand working pressures of up to 16bar.
90 Degree Elbow (32mm)
90 degree elbow to suit 32mm (OD) PE pipe. Designed to withstand working pressures of up to 16bar.
90 Degree Elbow (50mm)
90 degree elbow to suit 50mm (OD) PE pipe. Designed to withstand working pressures of up to 16bar.
90 Degree Elbow (63mm)
90 degree elbow to suit 63mm (OD) PE pipe. Designed to withstand working pressures of up to 16bar.
Black
90 degree Gutter Angle (Roundstyle PVC)
Corner fitting for 112mm Black Roundstyle PVC gutter. Double socketed with concealed internal fixing points to prevent the necessity of handed versions.
90 degree Gutter Angle - 170mm Deepstyle (Cast Iron Effect)
Fits over gutter ends to direct water flow around a corner.
90 degree gutter angle - Deepstyle (Cast Iron Effect)
Fits over gutter ends to direct water flow around a corner.
90 degree gutter angle - Roundstyle (Cast Iron Effect)
Fits over gutter ends to direct water flow around a corner.
Close
90 degree Soil Pipe Bend (110mm Cast Effect)
90 degree bend 110mm Cast Iron Effect Soil System Pipe.
Available with Single Socket or Double Socket
90 Degree Tee (20mm)
90 degree junction for 20mm (OD) water pipe. Designed to withstand working pressures of up to 16bar.
90 Degree Tee (25mm)
90 degree junction for 25mm (OD) PE pipes. Designed to withstand working pressures of up to 16bar.
90 Degree Tee (32mm)
90 degree junction for 32mm (OD) PE pipes. Designed to withstand working pressures of up to 16bar.
90 Degree Tee (50mm)
90 degree junction for 50mm (OD) PE pipes. Designed to withstand working pressures of up to 16bar.
90 Degree Tee (63mm)
90 degree junction for 63mm (OD) PE pipes. Designed to withstand working pressures of up to 16bar.
90º Spigot Bend (65mm Cast Effect)
90 degree bend with spigot for use with Brett Martin 65mm Square Cast Effect Downpipe.
Black
Close
92.5º Bend (110mm PVC)
Pushfit ring seal socketed bend for use in 110mm PVC Rainwater and Soil stack assemblies. Available single socketed or double socketed.
92½º Bend (68mm Cast Effect)
Right angle bend for use with 68mm Round Cast Effect Downpipe.
92½º Downpipe Bend (105mm Cast Effect)
Single socketed bend for use with Brett Martin 105mm Cast Effect Round Downpipe.
Black
92½º Downpipe Bend (68mm Round PVC)
92½ degree bend for 68mm Round PVC Downpipe.
94/110mm Coiled Electric Duct x 50m
An unperforated, coiled twin wall pipe complete with jointing collar and drawstring.
Internal Diameter 94mm
Outside Diameter 110mm
Coil Length 50m
Manufactured to BSEN50086-2.4.
94/110mm Coiled Water Duct x 50m
An unperforated, coiled twin wall pipe complete with jointing collar and drawstring, for use as ducting for water pipes.
Internal Diameter 94mm
Outside Diameter 110mm
Coil Length 50m
Black
Access Pipe (110mm PVC)
Single socketed pipe stub with removable access panel.
Close
Adjustable Bends (110mm)
Double socketed bend that can be adjusted to suit angle required.
Available for 110mm pipework in adjustable angles of 0 - 30° and 0 - 90°
Adjustable Offset Kit (68mm Cast Effect)
Adaptable offset for use if standard offsets will not suffice. Maximum 455mm projection.
Adjustable Square Offset Kit (65mm Cast Effect)
Adaptable offset for use if standard offsets will not suffice. Maximum 455mm projection.
Black
Air Admittance Valve (110mm PVC)
Contains a diaphragm which under light spring pressure is normally held closed, containing foul air within the soil system. When there is a discharge from an appliance, a negative air...
Close
Aluminium Rodding Eye (110mm)
Rodding access cover for use with 110mm drainage systems. Angled at 45 degrees for use with either a "Y" branch or 45 degree bends. Available in two styles - Oval...
Anti-Splash Shoe with Lugs (68mm Cast Effect)
Outlet sits flat to prevent splashing. With ears
Anti-Splash Square Shoe with ears (65mm Cast Effect)
Outlet sits flat to prevent splashing. With ears
Close
ATV Rear Carrier Box
A strong durable plastic utility box suitable for rear positioning on most ATVs/Quads. Available in two sizes: - 150 Litre Capacity External dimensions (mm): 810L x 950W x 385H -...
Bath hopper
For use with 65mm Square and 68mm Round Cast Effect Downpipes only. The decorative Bath hopper design boasts an Acorn motif. Overall Width 380mm Width of opening 261mm Height (Top...
Bath Hopper with Lion (100 x 75mm)
Bath Rainwater Head with Lion motif for use with Brett Martin 100mm x 75mm Rectangular Cast Effect Downpipe only. Overall dimensions Width 463mm Height 420mm Depth 207mm Internal dimensions Width 360mm Height 362mm Outlet Size 100mm...
Bath Hopper with Lion (105mm)
Bath Rainwater Head with Lion motif for use with Brett Martin 105mm diameter Cast Effect Downpipe only.
Overall dimensions: Width 463mm Height 420mm Depth 207mm
Internal dimensions: Width 360mm Height 362mm
Outlet Size 105mm
Blanking plug (20mm)
Plug to be inserted into 20mm Plasson fittings to prevent water flow. Can be removed at a later time for future connection. Designed to withstand working pressures of up to 16bar....
Blanking Plug (25mm)
Plug to be inserted into 25mm Plasson fittings to prevent water flow. Can be removed at a later time for future connection. Designed to withstand working pressures of up to 16bar. *Please...
Blanking Plug (32mm)
Plug to be inserted into 32mm Plasson fittings to prevent water flow. Can be removed at a later time for future connection. Designed to withstand working pressures of up to 16bar.
Blanking Plug (50mm)
Plug to be inserted into 50mm Plasson fittings to prevent water flow. Can be removed at a later time for future connection. Designed to withstand working pressures of up to 16bar.
Blanking Plug (63mm)
Plug to be inserted into 63mm Plasson fittings to prevent water flow. Can be removed at a later time for future connection. Designed to withstand working pressures of up to 16bar.
BSP Female Threaded Adaptor (63mm)
Compression fitting for 50mm (OD) PE pipe with a Female BSP threaded connection. Designed to withstand working pressures of up to 16bar.
BSP Male Threaded Adaptor (63mm)
Compression fitting for 63mm (OD) PE pipe with a Male BSP threaded connection. Designed to withstand working pressures of up to 16bar.
Close
CAP 12-person Treatment Plant
The Harlequin CAP12 is a compact sewage treatment plant designed specifically for larger domestic or small commercial installations of up to 12 people. It is a Continuous Aeration Plant which...
Close
CAP 15-person Treatment Plant
The Harlequin CAP15 is a compact sewage treatment plant designed specifically for larger domestic or small commercial installations of up to 15 people. It is a Continuous Aeration Plant which...
Close
CAP 18-person Treatment Plant
The Harlequin CAP18 is a compact sewage treatment plant designed specifically for larger domestic or small commercial installations of up to 18 people. It is a Continuous Aeration Plant which...
Close
CAP 6-person Treatment Plant
The Harlequin CAP6 is a compact sewage treatment plant designed specifically for domestic installations for up to 6 inhabitants (4 bedrooms). It is a Continuous Aeration Plant which operates using...
Close
CAP 9-person Treatment Plant
The Harlequin CAP9 is a compact sewage treatment plant designed specifically for domestic installations for up to 9 inhabitants (7 bedrooms). It is a Continuous Aeration Plant which operates using a...
Close
Cast Iron Effect Guttering - 68mm Round Downpipe
Socketed with ears. For use with 112mm Roundstyle and 115mm Deepstyle guttering.
Available in lengths of 1.8m and 2.5m.
Cattle Footbath (Profiled)
300 litre footbath manufactured from tough, impact resistant and U.V protected polyethylene which is designed with smooth edges for animal safety. The profiled base opens hooves for extra penetration of...
Cattle Footbath (Smooth)
360 litre footbath manufactured from tough, impact resistant and U.V protected polyethylene which is designed with smooth edges for animal safety. The smooth base is effective in the treatment of hoof...
Chemical Storage Cabinet (700 litre)
For improved farm safety this 700 litre storage cabinet is designed to safely store chemicals, medicines & first aid supplies, away from the reach of children, and to meet farm...
Coated Rise & Fall Bracket (Deepstyle High Capacity)
A drive in stake for brick or stone work, with adjustable rise and fall bracket to accept 170mm Deepstyle High Capacity guttering. With Coated Black finish to complement Cast Effect guttering.
Coated Rise & Fall Bracket (Deepstyle)
A drive in stake for brick or stone work, with adjustable rise and fall bracket to accept 115mm Deepstyle guttering. Coated Black finish to complement cast Iron effect guttering.
Coated Rise & Fall Bracket (Prostyle)
A drive in stake for brick or stone work, with adjustable rise and fall bracket to accept 106mm Prostyle guttering. Coated Black finish to complement Cast Effect guttering.
Coated Rise & Fall Bracket (Roundstyle)
A drive in stake for brick or stone work with adjustable rise and fall bracket to accept 112mm Roundstyle gutter. Coated Black finish to complement Cast Iron Effect guttering.
Close
Copper Pipe Adaptor Set (25mm)
Simply insert into fitting to join 25mm (OD) PE pipe to above ground (Table X) or below ground (Table Y) copper pipe.
Available to join 25mm (OD) PE to either 15mm or 22mm Copper
Corner Ogee hopper
For use with 68mm Round Cast Effect Downpipes only. The Corner Ogee hopper can be installed in an internal 90 degree angled gap. Width (from back centre to outside) 232mm Width of...
Coupler (160mm)
Double socketed coupler, with centre stop, for joining 160mm diameter underground pipes
Coupler with Lugs (68mm Cast Effect)
Jointing coupler for 68mm Round Cast Effect Downpipe. With fixing lugs.
Coupling (20mm)
For joining 20mm (OD) water pipes. Designed to withstand working pressures of up to 16bar.
Coupling (25mm)
For joining water pipes. Available in sizes from 20mm to 63mm.
Designed to withstand working pressures of up to 16bar.
Coupling (32mm)
For joining 32mm (OD) water pipes.
Designed to withstand working pressures of up to 16bar.
Coupling (50mm)
For joining 50mm (OD) water pipes.
Designed to withstand working pressures of up to 16bar.
Coupling (63mm)
For joining 63mm (OD) water pipes.
Designed to withstand working pressures of up to 16bar.
Close
Dated hopper
Hopper with the year of your choice moulded. After placing your order we will contact you for your selection. For use with 65mm Square and 68mm Round Cast Effect Downpipes only....
Black
Double Fix Pipe Clip (110mm PVC)
Fixing bracket for 110mm pipework.
Black
Downpipe Bracket (68mm Round PVC)
Double fixing bracket for 68mm Round PVC Downpipe. It is recommended that downpipe brackets should be used at centres NOT exceeding 2m.
Downpipe Branch (100 x 75mm Cast Effect)
Available in 112½º angle only.
Downpipe Branch (105mm Cast Effect)
Branch with 112½º spur for use with Brett Martin 105mm Cast Effect Round Downpipe.
Black
Downpipe Branch (68mm Round PVC)
Branch with 112½º spur to accept 68mm Round PVC downpipe.
Downpipe Clip (100 x 75mm Cast Effect)
Interemediate fixing bracket for Brett Martin 100mm x 75mm Rectangular Cast Effect Downpipe.
Downpipe Clip (105mm Cast Effect)
Interemediate fixing bracket for Brett Martin 105mm Round Cast Effect Downpipe.
Downpipe Clip (68mm Cast Effect)
Fixing bracket for use with 68mm Round Cast Effect Downpipe. It is recommended that these are used intermediately to ensure pipe alignment is maintained, especially on uneven brickwork.
Black
Downpipe Connector (68mm Round PVC)
Coupler for jointing lengths of 68mm Round PVC downpipe.
Downpipe Coupler (65mm Cast Effect)
Jointing collar for use with 65mm Square Cast Effect Downpipe.
Downpipe Coupler Plain (105mm Cast Effect)
Jointing coupler (without lugs) for use with Brett Martin 105mm Cast Effect Round Downpipe.
Downpipe Coupler Plain (68mm Cast Effect)
Jointing collar for 68mm Round Cast Effect Downpipe. Without ears.
Downpipe Coupler with Lugs (100 x 75mm Cast Effect)
Coupler with fixing lugs for Brett Martin 100mm x 75mm Rectangular Cast Effect Downpipe.
Downpipe Coupler with Lugs (105mm Cast Effect)
Jointing coupler with fixing lugs for use with Brett Martin 105mm Cast Effect Round Downpipe.
Downpipe Coupler with Lugs (65mm Cast Effect)
Jointing collar for use with 65mm Square Cast Effect Downpipe. With fixing lugs.
Downpipe Shoe (110mm PVC)
Single socketed shoe for turning water into a gully.
Black
Downpipe Shoe (68mm Round PVC)
Directs water from downpipe into a gully.
Close
Draw Cord
For threading cables through ducting. 6mm diameter. 5kn breaking strength. Available in either a 220m roll or on a 450m Drum
Driveway Duty 315mm Shallow Access Chamber Cover & Frame
Driveway duty (withstands 35kN load) cover & frame for use with 315mm diameter Shallow Access Chamber. With an airtight seal and robust screw down fixing, frame can be tilted for installation in...
DZR Brass Stop Tap (20mm)
WRAS approved stop tap for above & below ground use with 20mm (OD) MDPE water pipe. Designed to withstand working pressures of up to 16bar.
DZR Brass Stop Tap (25mm)
WRAS approved stop tap for above & below ground use with 25mm (OD) pipework. Designed to withstand working pressures of up to 16bar.
DZR Brass Stop Tap (32mm)
WRAS approved stop tap for above & below ground use with 32mm (OD) PE pipework. Designed to withstand working pressures of up to 16bar.
Electric Marker Warning Tape
50 micron polyethylene, non-traceable, underground marker tape printed with warning message for indicating presence of Electric Cable.
Width 150mm
Length 365m
End Plug (20mm)
Terminal fitting for 20mm (OD) water pipe. Your water authority may specify one of these to be fitted on a water pipe tail before they will connect. Designed to withstand...
End Plug (25mm)
Terminal fitting for 25mm (OD) water pipe. Your water authority may specify one of these to be fitted on a water pipe tail before they will connect. Designed to withstand...
End Plug (32mm)
Terminal fitting for 25mm (OD) water pipe. Water authority may specify one of these to be fitted on a water pipe tail before they connect.
End Plug (50mm)
Terminal fitting for 50mm (OD) water pipe. Your water authority may specify one of these to be fitted on a water pipe tail before they will connect. Designed to withstand...
End Plug (63mm)
Terminal fitting for 63mm (OD) water pipe. Your water authority may specify one of these to be fitted on a water pipe tail before they will connect. Designed to withstand...
External 135º Prostyle gutter angle (Cast Iron Effect)
Directs water flow around a corner.
External 150º Prostyle gutter angle (Cast Iron Effect)
Directs water flow around a corner.
External 90º Prostyle gutter angle (Cast Iron Effect)
Directs water flow around a corner.
External Left Handed Stopend - Prostyle (Cast Iron Effect)
Fits over end of gutter to prevent water running out.
Also available in right-handed orientation.
External Right Handed Stopend - Prostyle (Cast Iron Effect)
Fits over end of gutter to prevent water running out.
Also available in left-handed orientation.
External Stop End - 170mm Deepstyle (Cast Iron Effect)
Fits over end of gutter to prevent water running out.
External Stop End - Deepstyle (Cast Iron Effect)
Fits over end of gutter to prevent water running out.
External Stop End - Roundstyle (Cast Iron Effect)
Fits over end of gutter to prevent water running out.
Black
External Stopend (Deepstyle PVC)
End cap for 115mm Black Deepstyle PVC gutter. Fits over end of gutter. With integral fixing clips that allow quick and easy snap together assembly on the gutter length.
Extra Heavy Duty (F900) Channel 1m
*Heavy item - Available for Local Delivery/Collection only* F900 (90 tonne) load rating. 100mm Internal width. 122mm Internal depth. 6mm slot. Featuring: - High quality polypropylene base - Interlocking channel...
Black
Fascia Bracket (Deepstyle PVC)
Gutter support bracket for 115mm Black Deepstyle PVC gutter. Attaches via screw to a fascia board or roof rafter. To account for snow loading, it is recommended that support backets should...
Black
Fascia Bracket (Roundstyle PVC)
Gutter support bracket for 112mm Black Roundstyle PVC guttering. Attaches via screw to a fascia board or roof rafter. To account for snow loading, it is recommended that support backets...
Fascia Bracket - 170mm Deepstyle (Cast Iron Effect)
Attaches to fascia or roof rafter with a screw.
Fascia Bracket - Deepstyle (Cast Iron Effect)
Attaches to fascia or roof rafter with a screw.
Fascia Bracket - Prostyle (Cast Iron Effect)
Attaches to fascia or roof rafter with a screw.
Fascia Bracket - Roundstyle (Cast Iron Effect)
Attaches to fascia or roof rafter with a screw.
Female Threaded Adaptor (20mm)
Compression fitting with a ½ inch Female BSP threaded connection. Designed to withstand working pressures of up to 16bar.
Female Threaded Adaptor (25mm)
Compression fitting for 25mm (OD) PE pipe with a 3/4 inch Female BSP threaded connection. Designed to withstand working pressures of up to 16bar.
Close
Female Threaded Adaptor (32mm)
Compression fitting for 32mm (OD) PE pipe with a Female BSP threaded connection. Designed to withstand working pressures of up to 16bar. Available in 2 different BSP thread sizes: 3/4 inch or...
Female Threaded Adaptor (50mm)
Compression fitting for 50mm (OD) PE pipe with a 1½ inch Female BSP threaded connection. Designed to withstand working pressures of up to 16bar.
Close
Female Threaded Elbow (25mm)
90 degree elbow with a BSP female thread offtake, ideal for connecting to threaded outlets such as those on water troughs, and storage tanks. Available with either a choice of ½"...
Close
Female Threaded Elbow (32mm)
90 degree elbow with a BSP female thread offtake, ideal for connecting to threaded outlets such as those on water troughs, and storage tanks. Available with either a choice of ¾" or...
Flare 900lm Solar Brick
The Flare Solar Brick Light from JFC Manufacturing is the ideal solution for someone wanting automatic lighting with easy installation and two lighting modes. Recommended installation height 2-4 metres with...
Fleur de Lys Hopper
Cast Iron Effect Rainwater Hopper with classic Fleur de Lys motif, for use with 65mm Square and 68mm Round Cast Effect Downpipes only. Available in one size only Small: Overall...
Close
Flood Flap
Designed to eliminate the risk of flood damage by the backflow of sewage into properties through low level entries such as low level drain gullies, toilets and washing machine outlets. The...
Four Leaf Square Hopper
Cast Iron Effect Rainwater Hopper with a four leaf motif, for use with 65mm Square and 68mm Round Cast Effect Downpipes only. Available in one size only Long: Overall Width 540mm Width of...
Galvanised Rise & Fall Bracket (170mm Deepstyle)
A drive in stake for brick or stone work, with adjustable rise and fall bracket to accept 170mm Deepstyle guttering. Plain galvanised finish.
Galvanised Rise & Fall Bracket (Deepstyle)
A drive in stake for brick or stone work, with adjustable rise and fall bracket to accept 115mm Deepstyle guttering. Plain galvanised finish.
Galvanised Rise & Fall Bracket (Prostyle)
A drive in stake for brick or stone work, with adjustable rise and fall bracket to accept 106mm Prostyle guttering. With plain galvanised finish.
Galvanised Rise & Fall Bracket (Roundstyle)
A drive in stake for brick or stone work, with adjustable rise and fall bracket to accept 112mm Roundstyle guttering. Plain galvanised finish.
Close
Gargoyle hopper
Cast Iron Effect Rainwater Hopper with classic Gargoyle motif, for use with 65mm Square and 68mm Round Cast Effect Downpipes only. Available in two sizes Small: Overall Width 386mm ~ Width of opening 318mm...
Gothic hopper
Cast Iron Effect Rainwater Hopper with Gothic style windowed design, for use with 65mm Square and 68mm Round Cast Effect Downpipes only. Overall Width 370mm Width of opening 280mm Height (Top to bottom) 370mm ...
Close
Graf Platin Garden Comfort RWH Package
Graf garden packages have a basket filter that reliably holds back contaminants, whilst the filter construction guarantees a water yield of 100%. This tank's dome shaft provides easy access to...
Gutter Adaptor 100mm x 75mm Cast Effect
Gutter Adaptor to convert Brett Martin 170mm Cast Effect Running Outlet for use with 100mm x 75mm Rectangular Downpipe.
Close
Handed Shoe with Lugs (68mm Cast Effect)
Directs water from downpipe into gully or grate at 90 degrees. Available in left-handed or right-handed orientation. With fixing lugs.
Heavy Duty (C250) Channel 1m
*Heavy item - Available for Local Delivery/Collection only* C250 (25 tonne) load rating. 100mm Internal Width. 122mm Internal Depth. 6mm Slot. Features: - High quality polypropylene base - Interlocking channel tongue...
Helios 4800lm Solar Floodlight
The Helios Solar Floodlight from JFC Manufacturing is the ideal solution for someone looking for flexible and self-sufficient lighting (10x15m). The Helios can be switched on and off and dimmed...
Horse Haybell (Round Bale Cover Feeder)
Designed to fit over a standard round bale, the Haybell protects hay in all weather conditions and minimises wastage due to trampling and fouling. Easy to manoeuvre, allowing it to...
Close
HydroClear 12-person Treatment Plant
The Hydroclear 12-person treatment plant can efficiently treat wastewater from bathrooms, toilets, laundry and kitchens in domestic installations for up to 9 inhabitants. Wastewater discharged from the HC12 is absolutely safe and clean...
Close
HydroClear 6-person Treatment Plant
The Hydroclear 6-person treatment plant can efficiently treat wastewater from bathrooms, toilets, laundry and kitchens in domestic installations for up to 6 inhabitants (4 bedrooms). Wastewater discharged from the HC6 is absolutely...
Close
HydroClear 9-person Treatment Plant
The Hydroclear 9-person treatment plant can efficiently treat wastewater from bathrooms, toilets, laundry and kitchens in domestic installations for up to 9 inhabitants. Wastewater discharged from the HC9 is absolutely safe and clean...
Internal 135º Prostyle gutter angle (Cast Iron Effect)
Directs water flow around a corner.
Internal 90º Prostyle gutter angle (Cast Iron Effect)
Directs water flow around a corner.
Internal Stop End (Roundstyle PVC)
End cap for 112mm Black Roundstyle PVC gutter. Fits into socket to prevent water from flowing out of gutter. Can be used with a running outlet to create a stop end...
Internal Stop End - 170mm Deepstyle (Cast Iron Effect)
Fits into socket to prevent water from flowing out of gutter. Can be used with a running outlet to create a stop end outlet.
Internal Stop End - Deepstyle (Cast Iron Effect)
Fits into socket to prevent water from flowing out of gutter. Can be used with a running outlet to create a stop end outlet.
Internal Stop End - Roundstyle (Cast Iron Effect)
Fits into socket to prevent water from flowing out of gutter. Can be used with a running outlet to create a stop end outlet.
Black
Internal Stopend (Deepstyle PVC)
End cap for 115mm Black Deepstyle PVC gutter. Fits into socket, can be used with a running outlet to create a stop end outlet.
Leaf Hopper
Cast Iron Effect Rainwater Hopper with classic Leaf motif, for use with 65mm Square and 68mm Round Cast Effect Downpipes only. Available in one size only Small: Overall Width 386mm Width of opening 318mm...
Left Hand Stopend Outlet - Prostyle (Cast Iron Effect)
Fits over end of Prostyle guttering, preventing water from running out of gutter, and diverting it into downpipe.
Also available in right handed orientation.
Light Duty Channel with Galvanised Grate
*Availble for Local Delivery/Collection only* 1m length of channel drainage with a plastic grill that conforms to BS EN 1433: Class A15 and can withstand a 1.5 tonne loading. The system...
Light Duty Channel with Plastic Grate
*Available for Local delivery/collection only* 1m length of channel drainage with a plastic grill that conforms to BS EN 1433: Class A15 and can withstand a 1.5 tonne loading. The system...
Close
Lion Hopper
Cast Iron Effect Rainwater Hopper with Lion motif, for use with 65mm Square and 68mm Round Cast Effect Downpipes only. Available in two sizes Small: Overall Width 386mm ~ Width of opening 318mm Height...
Lug Fixing Pack (65 & 68mm Cast Effect)
For use with Brett Martin Cast Iron Effect downpipe. Contains 10 x 55mm Screws and Wall Plugs. Suitable for fixing 65mm square and 68mm round downpipe. Available in Black only.
Lug Fixing Pack - 105mm/100x75mm/110mm
For use with Brett Martin Cast Iron Effect downpipe. Contains 10 Screws and Wall Plugs. Suitable for fixing 105mm round and 100 x 75mm rectangular downpipe.
Mains Stop Valve (50mm)
The first WRAS approved high performance non metallic mains stop valve. With 1 1/2" BSP female threads, requires 2 x BSP Male Thread Adaptor 50mm x 1 1/2" for connction...
Mains Stop Valve (63mm)
The first WRAS approved high performance non metallic mains stop valve. With 2" BSP female threads, requires 2 x BSP Male Thread Adaptor 63mm x 2" for connction to 63mm...
Male BSP Threaded Adaptor (20mm)
20mm Compression fitting with a 1/2 inch Male BSP threaded connection. Designed to withstand working pressures of up to 16bar.
Male Threaded Adaptor (25mm)
Compression fitting for 25mm (OD) PE pipe with a 3/4 inch Male BSP threaded connection. Designed to withstand working pressures of up to 16bar.
Male Threaded Adaptor (32mm)
Compression fitting for 32mm (OD) PE pipe with a 1 inch Male BSP threaded connection. Designed to withstand working pressures of up to 16bar.
Male Threaded Adaptor (50mm)
Compression fitting for 50mm (OD) PE pipe with a 1½ inch Male BSP threaded connection. Designed to withstand working pressures of up to 16bar.
Medi-Safe Storage Cabinet (180 litre)
For improved farm safety this 180 litre storage cabinet is designed to safely store medicines, Veterinary documents & first aid supplies, away from the reach of children, and to meet...
Medium Ogee Hopper
Fluted style rainwater hopper, for use with 65mm Square and 68mm Round Cast Effect Downpipes only.
Overall Width 326mm
Width of opening 295mm
Height (Top to bottom) 218mm
Depth (Front to back) 201mm
Metal Pipe Bracket (110mm PVC)
Fixing bracket for 110mm PVC pipework. Metal brackets MUST be used to support the installed weight of 110mm systems of height greater than 10m.
Close
Meter Boundary Box (25mm)
All in one stop tap chamber with 25mm (OD) water pipe connections. 200mm diameter plastic chamber houses a Concentric water meter (1 ½" BSP thread - Domestic use - Nominal flow rate...
Mini Saber Solar Floodlight
The Mini Saber Solar Floodlight from JFC Manufacturing is the ideal solution for someone who requires self-sufficient, automatic lighting in smaller areas (10x15m). Recommended installation height is 2.4-5 metres with...
Multi-Junction for 60/80/100mm Land drainage pipe
Can be cut down at all points to suit either 60mm, 80mm or 100mm single walled land drainage pipe.
Close
Non Return Valve
Designed to eliminate the risk of flood damage by the backflow of sewage into properties through low level entries such as low level drain gullies, toilets and washing machine outlets. The...
Green
Blue
Close
Nose-Fill Drinker
2 Litre drink bowl fitted with a nose fill valve capable of delivering 15L/min at 3 bar pressure, dispensing water on demand ensuring fresh, clean water is always available. The DBL5...
Pedestrian Duty 315mm Shallow Access Chamber Cover & Frame
Pedestrian Duty cover for use with 315mm diameter Shallow Access Chamber. With an airtight seal and robust screw down fixing, frame can be tilted for installation in slopes of up to...
Pedstrian Duty 280mm Shallow Access Inspection Chamber Cover & Frame
Square cover for pedestrian areas only, for use with 280mm diameter Shallow Access Inspection chamber. Double sealed to create airtight unit for use in internal areas.
Black
Pipe Connector (110mm PVC)
Double socketed connector for joining 110mm aboveground pipes, either in rainwater systems or in soil stacks.
Pipe Liner (20mm)
Pipe Liner for use with 20mm (OD) MDPE water pipe. Designed to withstand working pressures of up to 16bar.
Pipe Liner (25mm)
For use with 25mm water pipe fittings. Designed to withstand working pressures of up to 16bar.
Pipe Liner (32mm)
For use with 32mm water pipe fittings. Designed to withstand working pressures of up to 16bar.
Pipe Liner (50mm)
For use with 50mm water pipe fittings. Designed to withstand working pressures of up to 16bar.
Pipe Liner (63mm)
For use with 63mm water pipe fittings. Designed to withstand working pressures of up to 16bar.
Pipe Lubricant Gel 0.5kg
For assembly of socketed pipe systems. Suitable for drinking water systems and drainage systems. Can be used with a multitude of pipe compositions: e.g. PVC, Polyethene (PE), Polypropene (PP), Cast...
Black
Close
Plain 'Y' Branch (110mm PVC)
Double socketed branch with 135 degree spur for use with 110mm PVC Rainwater and Soil stack systems.
Plain Bath Hopper (100 x 75mm)
Plain Bath Rainwater Head for use with Brett Martin 100mm x 75mm Rectangular Cast Effect Downpipe only. Overall dimensions: Width 463mm Height 420mm Depth 207mm Internal dimensions: Width 360mm Height 362mm Outlet Size 100mm x...
Plain Bath Hopper (105mm)
Plain Bath Rainwater Head for use with Brett Martin 105mm diameter Cast Effect Downpipe only.
Overall dimensions: Width 463mm Height 420mm Depth 207mm
Internal dimensions: Width 360mm Height 362mm
Outlet Size 105mm
Plain Tee Branch (110mm Cast Effect)
Double socket branch for 110mm Cast Iron Effect Soil System Pipe.
Black
Plain Tee Branch (110mm PVC)
Double socketed branch with 92.5 degree spur for use with 110mm PVC Rainwater and Soil stack systems.
Close
Plass4 Universal Coupler (25mm)
A universal pipe fitting which connects 25mm (OD) metric polyethylene to a wide range of pipe types: including imperial polyethylene (alkathene), copper (table X & Y), lead, galvanised steel, PVCu...
Close
Plass4 Universal Coupler (32mm)
A universal pipe fitting to connect 32mm (OD) metric polyethylene to a wide range of pipe types: including imperial polyethylene (alkathene), copper (table X & Y), lead, galvanised steel, PVCu...
Plass4 Universal Coupler (50mm)
A universal pipe fitting to connect 50mm (OD) metric polyethylene to a wide range of pipe types with an outside diameter between 35 and 50mm. Ideal for conncting to imperial...
Plasson Wrench (16-40mm)
Wrench for ease of installation of Plasson fittings. Suitable for 16mm, 20mm, 25mm, 32mm and 40mm Plasson mechanical fittings.
Plasson Wrench (40-75mm)
Wrench for ease of installation of Plasson fittings. Suitable for 40mm, 50mm, 63mm and 75mm Plasson mechanical fittings.
Plastic Stop Tap (20mm)
WRAS approved plastic stop tap for above and below ground use with 20mm (OD) water pipe. Designed to withstand working pressures of up to 16bar.
Plastic Stop Tap (25mm)
WRAS approved plastic stop tap for above and below ground use with 25mm (OD) PE pipework. Designed to withstand working pressures of up to 16bar.
Plastic Stop Tap (32mm)
WRAS approved plastic stop tap for above and below ground use with 32mm (OD) PE pipework. Designed to withstand working pressures of up to 16bar.
RainBloc Soakaway/Attenuation Crate
*Please note that this item is only available for local delivery or collection*Graf RainBloc crates are individual modular cells which can be built up to form an underground structure for...
Rainwater Adaptor (110mm)
Universal rubber adaptor connects rainwater down pipe or waste pipe. Fits into 110mm socket.
Black
Rainwater Head (68mm Round PVC)
Hopper head for the collection of rainwater with a 68mm Round outlet. With 2 fixing points.
Overall Width 274mm Depth 136mm Height 176mm
Reducing Collar (25mm)
For joining 25mm (OD) PE pipe to 20mm (OD) PE pipe. Designed to withstand working pressures of up to 16bar.
Close
Reducing Collar (32mm)
For joining 32mm (OD) PE pipe to either 25mm (OD) or 20mm (OD) PE pipe. Designed to withstand working pressures of up to 16bar.
Reducing Set
Simply insert into a fitting to reduce pipe size. Designed to withstand working pressures of up to 16bar.
Close
Reducing Set (32mm)
Conversion kit for use with 32mm Plasson compression fittings to enable connection to either 20mm (OD) or 25mm (OD) size pipe. Designed to withstand working pressures of up to 16bar.
Close
Reducing Set (50mm)
Conversion kit for use with 50mm Plasson compression fittings to enable connection to either 32mm (OD) or 25mm (OD) size pipe. Designed to withstand working pressures of up to 16bar.
Close
Reducing Set (63mm)
Conversion kit for use with 63mm Plasson compression fittings to enable connection to either 50mm (OD), 32mm (OD) or 25mm (OD) size pipe. Designed to withstand working pressures of up to 16bar.
Close
Retrofit Non Return Valve
Designed to prevent foul water flowing back from the blocked sewerage system to flood the property from the inside via toilets, plug holes and waste pipes. These unique and patented...
Right Hand Stopend Outlet - Prostyle (Cast Iron Effect)
Fits over end of Prostyle guttering, preventing water from running out of gutter, and diverting it into downpipe.
Also available in Left handed orientation.
Close
Roddable Back Inlet Gully Bottle (110mm)
Features a removable inner sleeve to make cleaning easy and creating access for rodding. This sleeve also creates a space between itself and the wall of the gully, forcing the water...
Close
Rubber Boss Adaptor
Allows connection of waste pipe into a 110mm PVC Pushfit Soil stack system when used with Brett Martin Boss pipe, Boss Strap Adaptors, and Bossed Tee Branch fittings. Available for...
Black
Running Outlet (Deepstyle PVC)
For 115mm Black Deepstyle PVC gutter. Allows water to flow from gutter into downpipe. Easily converted into a stopend outlet by simply trimming off the exposed fixing lug and insert an...
Running Outlet (Roundstyle PVC)
For 112mm Black Roundstyle PVC gutter. Allows water to flow from gutter into downpipe. Easily converted into a stopend outlet by simply trimming off the exposed fixing lug and insert an...
Running Outlet - 170mm Deepstyle (Cast Iron Effect)
Enables water to flow from gutter into downpipe.
Running Outlet - Deepstyle (Cast Iron Effect)
Enables water to flow from gutter into downpipe.
Running Outlet - Prostyle (Cast Iron Effect)
Enables water to flow from gutter into downpipe.
Running Outlet - Roundstyle (Cast Iron Effect)
Enables water to flow from gutter into downpipe.
Saber 4800lm Solar Floodlight
The Saber Solar Floodlight from JFC Manufacturing is the ideal solution for someone looking for self-sufficient powerful lighting (20x20m). It has a long run time and can be set to...
Sheep Footbath (Profiled)
The JFC FB5 footbath is manufactured from tough, impact resistant and U.V protected polyethylene which is designed with smooth edges for animal safety. The profiled base opens hooves for extra penetration of...
Sheep Footbath (Smooth)
The JFC FB1 footbath is manufactured from tough, impact resistant and U.V protected polyethylene which is designed with smooth edges for animal safety. The smooth base is effective in the treatment of...
Shell Hopper
Cast Iron Effect Rainwater Hopper with Shell motif, for use with 65mm Square and 68mm Round Cast Effect Downpipes only. Available in one size only. Long: Overall Width 540mm Width of opening 460mm Height...
Shoe with ears (105mm Cast Effect)
For directing water flow to drainage connection.
Shoe with Lugs (68mm Cast Effect)
Directs water from 68mm Round Cast Effect Downpipe to a gully, channel, or other surface. With fixing lugs.
Side Fix Rafter Bracket (Galvanised)
Use with a fascia bracket to fix guttering to properties with open eaves. Simply attach this bracket to the top side of the rafter at the eaves, the fascia bracket is attached...
Black
Slip Connector (110mm PVC)
Double socketed connector without centre stop. Ideal for repair joints on 110mm aboveground pipes, either in rainwater systems or in soil stacks.
Slip Coupler (110mm)
Double Socket jointing coupler without a centre stop - ideal for repair joints, and tight assemblies.
Slip Coupler (160mm)
Jointing coupler without a centre stop, for 160mm underground pipe - ideal for repair joints, and tight assemblies.
Small Ogee Hopper
Fluted style rainwater hopper for use with 68mm Round Cast Effect Downpipe only - not suitable for use with 65mm Square Downpipe Overall Width 290mm Width of opening 255mm Height (Top to bottom) 202mm ...
Socket Plug (160mm)
Blanking plug, fits into pipe socket.
Socket Shroud Plain (110mm Cast Effect)
Fits over 110mm Cast Iron Effect soil pipe socket for a more pleasing aesthetic effect.
Socket Shroud with Lugs (110mm Cast Effect)
Optional shroud fitting which fits over soil pipe clip for a more pleasing aesthetic effect. Please note that this is not a fixing bracket.
Soil Access Pipe (110mm Cast Effect)
Rodding access point for 110mm Cast Iron Effect Soil System Pipe. With 2 boss connections.
Available as Single Socket only.
Soil Offset Pipe 500mm (110mm Cast Effect)
500mm long, plain ended piece of 110mm Cast Effect Soil pipe for creating soil pipe offsets when used in conjunction with offset bends.
Soil Pipe Bracket with Lugs (110mm Cast Effect)
Fixing bracket for Brett Martin 110mm Cast Effect Soil System
Soil Pipe Connector (110mm Cast Effect)
Double socketed coupler for joining 110mm Cast Iron Effect Soil System Pipe.
Soil Vent Cowl (110mm Cast Effect)
Terminal fitting for externally venting 110mm Cast Effect Soil systems.
Solvent Cement 125ml
Solvent cement for use with PVC pipe in non-pressure systems.
Spacer pack
5mm spacer for use with Cast Iron Style pipe work (pack contains 10 x 5mm spacers)
Square Downpipe Branch (65mm Cast Effect)
112½º branch for use with Brett Martin 65mm Square Cast Effect Downpipe.
Square Shoe with Ears (65mm Cast Effect)
With ears
Squeeze Off Tool 20-32mm
Squeeze off tool for clamping MDPE pipe shut whilst work is carried out on it. Suitable for use on 20mm, 25mm & 32mm diameter MDPE.
Squeeze Off Tool 32-63mm
Squeeze off tool for clamping MDPE pipe shut whilst work is carried out on it. Suitable for use on 32mm, 50mm & 63mm diameter MDPE.
Green
Blue
Close
Stable Corner Feeder
The JFC EQ2 Corner Mounted Feeder is manufactured from tough impact resistant polyethylene and has a smooth, durable, seamless finish for ease of cleaning. The EQ2 is designed to maximise space by fitting securely...
Green
Blue
Close
Stable Wall Feeder
The JFC EQ1 wall feeder is manufactured from tough impact resistant polyethylene and has a smooth, durable, seamless finish for ease of cleaning. The EQ1 is designed with a feed retention lip...
Black
Strap On Boss Adaptor (110mm PVC)
The strap-on-boss permits connection of a waste pipe up to 50mm diameter to a soil stack at any time after the stack has been erected.
Tee Branch with 4 Bosses (110mm Cast Effect)
Double socket branch for 110mm Cast Iron Effect Soil System Pipe with 4 Bosses for connecting waste pipe when used with Rubber Waste Adaptors.
Three Wheeled Feed Barrow
The JFC TWB2 Fixed Body Swivel Wheelbarrow has a three wheeled design which makes it ideal for manoeuvring in tight spaces. The TWB2 is manufactured from tough, impact resistant polyethylene and the large...
Tip Over Drinker
This drink bowl has a unique design enabling you to empty the bowl at the push of a button - the gravity operated rotation simply uses the weight of the water to...
Top Fix Rafter Bracket (Galvanised)
Use with a fascia bracket to fix guttering to properties with open eaves. Simply attach this bracket to the top side of the rafter at the eaves, the fascia bracket is attached...
Triple Boss Pipe (110mm Cast Effect)
Single socketed. With three bosses to connect waste pipe.
Black
Triple Boss Pipe (110mm PVC)
Single socketed. With three bosses to connect waste pipe.
Close
Tudor Rose Hopper
Cast Iron Effect Rainwater Hopper with classic Tudor Rose motif, for use with 65mm Square and 68mm Round Cast Effect Downpipes only. Available in two sizes. Small: Overall Width 386mm ~ Width of...
Twin Wheeled Barrow
The JFC TWBG Fixed Wheelbarrow is perfect for use both on the farm, the yard and for general duties. The large capacity body is manufactured from impact and U.V resistant polyethylene,...
Close
Undated hopper
Cast Iron Effect Rainwater Hopper, for use with 65mm Square and 68mm Round Cast Effect Downpipes only. Available in two sizes Small: Overall Width 386mm ~ Width of opening 318mm Height (Top to bottom) 226mm...
Black
Union Bracket (Deepstyle PVC)
Joining bracket for for 115mm Black Deepstyle PVC gutter. With integral flexible clips that allow quick and easy snap together assembly on to the gutter length.
Black
Union Bracket (Roundstyle PVC)
Joining bracket for 112mm Black Roundstyle PVC gutter. With integral flexible clips that allow quick and easy snap together assembly on to the gutter length.
Union Bracket - 170mm Deepstyle (Cast Iron Effect)
Bracket for joining two pieces of gutter together.
Union Bracket - Deepstyle (Cast Iron Effect)
Bracket for joining two pieces of gutter together.
Union Bracket - Prostyle (Cast Iron Effect)
Bracket for joining two pieces of gutter together.
Union Bracket - Roundstyle (Cast Iron Effect)
Bracket for joining two pieces of gutter together.
Black
Vent Cowl (110mm PVC)
Terminal fitting for 110mm soil stack system
Wall fixing pack
Pack contains 10 x 55mm screws and wall plugs
Wall Mountable Chem Store
For improved farm safety this 18 litre, wall mountable storage cabinet is designed to safely store chemicals, medicines & first aid supplies, away from the reach of children, and to meet...
Wall Plate Elbow (20mm)
DZR brass bodied fitting for connection to 20mm MDPE with ½ inch female BSP thread for connection to ½ inch bib tap.
Wall Plate Elbow (25mm)
DZR brass bodied fitting for connection to 20mm MDPE with ¾ inch female BSP thread for connection to ¾ inch bib tap.
Water Marker Warning Tape
50 micron polyethylene, non-traceable, underground marker tape printed with warning message for indicating presence of Water Pipe.
Width 150mm
Length 365m
Weathering Collar (110mm PVC)
For use where a soil vent pipe penetrates the roof covering, this fitting diverts rainwater away.
Windowed Bath Hopper (100mm x 75mm)
Bath Rainwater Head with Windowed motif for use with Brett Martin 100mm x 75mm Rectangular Cast Effect Downpipe only. Overall dimensions Width 463mm Height 420mm Depth 207mm Internal dimensions Width 360mm Height 362mm Outlet Size 100mm x...
Windowed Bath Hopper (105mm)
Bath Rainwater Head with Windowed motif for use with Brett Martin 105mm diameter Cast Effect Downpipe only.
Overall dimensions: Width 463mm Height 420mm Depth 207mm
Internal dimensions: Width 360mm Height 362mm
Outlet Size 105mm
½ Inch Bib Tap
DZR Brass bib tap with double check valve. With ½ inch Male BSP threaded connection and ½ inch hose tail union.
½ Inch Bib Tap with DCV (with ¾ Inch adaptor)
DZR Brass bib tap with double check valve and adaptor for connection to 25mm Wall Plate Elbow. With adaptor to convert ½ inch connection to ¾ inch Male BSP threaded connection and ½...
½ inch Female Threaded Elbow (20mm)
90 degree fitting for 20mm (OD) water pipe with a ½ inch Female BSP thread. Commonly used to connect 20mm (OD) water pipe to water troughs, float valves or any fitting with a ½ Inch male BSP...
½" Double Check Valve
WRAS & UK Water Reg4 approved double check valve. With ½" female threaded connection. Requires 2no. 20mm Male Thread Adaptor x ½" for connection to 20mm water pipe.
¾ Inch Bib Tap with DCV
DZR Brass bib tap with double check valve. For connection to 25mm Wall Plate Elbow. With ¾ inch Male BSP threaded connection and ¾ inch hose tail union.
¾ Inch Double Check Valve (25mm)
WRAS & UK Water Reg4 approved double check valve. With ¾ Inch female threaded connection. Requires 2no. 25mm Male Thread Adaptor x ¾ Inch for connection to 25mm water pipe.
¾ inch Female Threaded Elbow (20mm)
90 degree fitting for 20mm (OD) water pipe with a ¾ inch Female BSP thread. Commonly used to connect 20mm (OD) water pipe to water troughs, float valves or any fitting with a ¾ Inch...