- No products in the cart.
1½ Inch Double Check Valve (50mm)
Kiwa UK Water Reg4 approved double check valve. With 1½ inch female threaded connection. Requires 2no. 50mm Male Thread Adaptor x 1½ inch for connection to 50mm water pipe.
2 Inch Double Check Valve (63mm)
Kiwa UK Water Reg4 approved double check valve. With 2 inch female threaded connection. Requires 2no. 63mm Male Thread Adaptor x 2 inch for connection to 63mm water pipe.
2000 Litre Horizontal Bunded Oil Tank
Harlequin 2000 Litre integrally bunded Horizontal oil tank, suitable for the storage of heating oil in a domestic or commercial set up. Made from Medium Density Polyethylene (MDPE), this tank is lightweight, durable,...
20mm Blue MDPE Water Pipe
SC80 (PE80) Polyethylene Light Blue Pipe for the supply of clean water.
12 bar pressure rating (SDR9)
Outside diameter 20mm (15.4mm internal)
Available in Coil sizes: 25m, 50m, 100m, 150m
225mm 15 Degree Twin Wall Bend
Double socket bend for 225mm (internal)/268mm (external) twin wall pipe. For a watertight seal optional sealing rings are available (2 required per bend)
225mm 30 Degree Twin Wall Bend
Double socket bend for 225mm (internal)/268mm (external) twin wall pipe. For a watertight seal optional sealing rings are available (2 required per bend).
225mm 45 Degree Twin Wall Bend
Double socket bend for 225mm (internal)/268mm (external) twin wall pipe. For a watertight seal optional sealing rings are available (2 required per bend).
225mm 90 Degree Twin Wall Bend
Double socket bend for 225mm (internal)/268mm (external) twin wall pipe. For a watertight seal optional sealing rings are available (2 required per bend).
225mm to 150mm Twin Wall Reducing "Y" Branch
Triple socket branch for 225mm (ID)/268mm (OD) twin wall pipe with a 45 degree spur for 150mm (ID)/178mm (OD) twin wall pipe. For a watertight seal optional sealing rings are available (2...
225mm to 150mm Twin Wall Reducing Tee Branch
Triple socket branch for 225mm (ID)/268mm (OD) twin wall pipe with a 90 degree spur for 150mm (ID)/178mm (OD) twin wall pipe. For a watertight seal optional sealing rings are available (2...
Close
225mm Twin Wall
Plain ended pipe (Collar and ring seals sold separately). Available unperforated or perforated.
Inside diameter 225mm
Outside diameter 268mm
Length 6 metre
225mm Twin Wall "Y" Branch
Triple socket branch with 45 degree spur for 225mm (internal)/268mm (external) twin wall pipe. For a watertight seal optional sealing rings are available (3 required per branch).
225mm Twin Wall Collar
For joining 225mm (internal)/268mm (external) twin wall pipes. Optional sealing rings available for watertight connection (2 required per collar).
225mm Twin Wall Sealing Ring
Seals ensure a waterproof and secure connection when used with 225mm (ID)/268mm (OD) twin wall pipe.
225mm Twin Wall Tee Branch
Triple socket branch with 90 degree spur for 225mm (internal)/268mm (external) twin wall pipe. For a watertight seal optional sealing rings are available (3 required per branch).
Close
22½ Degree Bend (110mm)
Bend for 110mm underground pipe. Available single socketed or double socketed.
22½ Degree Bend (160mm)
Single socketed bend for 160mm undergorund pipe
230mm Offset (105mm Cast Effect)
Preformed 112½º "swan neck" bend for use with Brett Martin 105mm Cast Effect Round Downpipe. 230mm projection is centre to centre.
230mm Offset (68mm Cast Effect)
112½º "swan neck" bend to return downpipe to your wall. For sizing, measure your soffit depth and then select the next size up.
250 Litre ATV Tipping Trailer
The JFC 250L ATV Trailer is manufactured from tough, impact resistant polyethylene and is fitted with 2 pneumatic wheels, a galvanised chassis and an easy-to-use tipping mechanism. The heavy duty...
Close
250 Litre Tipping Wheelbarrow
The JFC 250L Tipping Wheelbarrow is perfect for use both on the farm, the yard and for general duties. The innovative tipping design means that it can be tipped with minimal...
2500 Litre Horizontal Bunded Oil Tank
Harlequin 2500 Litre integrally bunded Horizontal oil tank, suitable for the storage of heating oil in a domestic or commercial set up. Made from Medium Density Polyethylene (MDPE), this tank is lightweight, durable,...
25mm Blue MDPE Water Pipe
SC80 (PE80) Polyethylene Light Blue Pipe for the supply of clean water.
12 bar pressure rating (SDR11)
Outside diameter 25mm (20.4mm internal)
Available in Coil sizes: 25m, 50m, 100m, 150m
Close
25mm Microflex Primo Duo Heating Pipe Kit
Double, flexible, pre-insulated, self-compensating, underground pipe especially suitable for heating water, but also for (hot) potable water, wastewater and other fluids. 25mm Microflex Primo Duo consits of two PE-X transport...
Close
25mm Microflex Quadro Pipe
A quadruple, flexible, pre-insulated, self-compensating, underground pipe with two heating water pipes, a sanitary hot water pipe and a circulation loop pipe. These are enveloped within CFC-free foam insulation, and encased in...
280mm 90 Degree Shallow Access Inspection Chamber Base
Unique 90 degree design. For use with 110mm pipework. Suitable for inverts of up to 600mm.
Depth 205mm
280mm Shallow Access Inspection Chamber Base
For use with 110mm pipework, with straight through inlet and outlet, plus one inlet each side at 45 degrees. Supplied with 2 socket plugs. Suitable for inverts of up to 600mm.
Depth 205mm
280mm Shallow Access Inspection Chamber Riser
Raising piece for inspection chamber. Robust ribbed design with seals to provide watertight fit. Height 185mm. Only two required to achieve 600mm maximum invert (with base and lid & frame).
28mm Copper Pipe Adaptor Set (32mm)
Simply insert into fitting to join PE pipe to above ground (Table X) or below ground (Table Y) copper pipe.
Available to join 32mm (OD) PE to 28mm Copper
30 Gallon Fast Fill Water Trough
The DT30FF (136L/30 Gal) premium water trough is manufactured from tough, impact resistant polyethylene and has a smooth black polished finish designed specifically for animal safety. The trough features an...
300mm 15 Degree Twin Wall Bend
Double socket bend for 300mm (internal)/353mm (external) twin wall pipe. For a watertight seal optional sealing rings are available (2 required per bend).
300mm 30 Degree Twin Wall Bend
Double socket bend for 300mm (internal)/353mm (external) twin wall pipe. For a watertight seal optional sealing rings are available (2 required per bend).
300mm 45 Degree Twin Wall Bend
Double socket bend for 300mm (internal)/353mm (external) twin wall pipe. For a watertight seal optional sealing rings are available (2 required per bend).
300mm 90 Degree Twin Wall Bend
Double socket bend for 300mm (internal)/353mm (external) twin wall pipe. For a watertight seal optional sealing rings are available (2 required per bend).
300mm C250 Gully Grate
*Heavy item - Available for Local Delivery/Collection only* For use with 300mm diameter gully pots. 25 Tonne safe test load hinged grating suitable for carriageway applications (not exceeding 500mm from...
300mm Square Recessed Cover for Screed Infill
10 Tonne (GLVW) loading recessed covers designed to be in-filled with a screed or concrete, featuring four locking screws and a rubber neoprene seal to prevent odour egress. Ideal for indoor...
300mm to 150mm Twin Wall Reducing "Y" Branch
Triple socket branch for 300mm (ID)/353mm (OD) twin wall pipe with a 45 degree spur for 150mm (ID)/178mm (OD) twin wall pipe. For a watertight seal optional sealing rings are available (2...
300mm to 150mm Twin Wall Reducing Tee Branch
Triple socket branch for 300mm (ID)/353mm (OD) twin wall pipe with a 90 degree spur for 150mm (ID)/178mm (OD) twin wall pipe. For a watertight seal optional sealing rings are available (2...
300mm to 225mm Twin Wall Reducing "Y" Branch
Triple socket branch for 300mm (ID)/353mm (OD) twin wall pipe with a 45 degree spur for 225mm (ID)/268mm (OD) twin wall pipe. For a watertight seal optional sealing rings are available.
300mm to 225mm Twin Wall Reducing Tee Branch
Triple socket branch for 300mm (ID)/353mm (OD) twin wall pipe with 90 a degree spur for 225mm (ID)/268mm (OD) twin wall pipe. For a watertight seal optional sealing rings are available...
Close
300mm Twin Wall
Plain ended pipe (Collar and ring seals sold separately). Available unperforated or perforated.
Inside diameter 300mm
Outside diameter 353mm
Length 6 metre
300mm Twin Wall "Y" Branch
Triple socket branch with a 45 degree spur for 300mm (internal)/353mm (external) twin wall pipe. For a watertight seal optional sealing rings are available (3 required per branch).
300mm Twin Wall Collar
For joining 300mm (internal)/353mm (external) twin wall pipes. Optional sealing rings available for watertight connection (2 required per collar).
300mm Twin Wall Sealing Ring
Seals ensure a waterproof and secure connection when used with 300mm (ID)/353mm (OD) twin wall pipe.