- No products in the cart.
1 Inch Double Check Valve (32mm)
Kiwa UK Water Reg4 approved double check valve. With 1 Inch female threaded connection. Requires 2no. 32mm Male Thread Adaptor x 1 Inch for connection to 32mm water pipe.
1000 Litre Slimline Bunded Oil Tank
Harlequin 1000 Litre integrally bunded oil tank, moulded from durable medium density polyethylene, with inner tank vent and moulded-in handles for ease of lifting.Tank features bottom outlet (1” BSP female thread),...
100mm Connector for Land Drainage Pipe
Straight connector for 100mm single walled land drainage pipe
100mm Perforated Gas Duct x 50m
A perforated, single walled corrugated pipe, manufactured from high density polyethylene used for ducting gas pipe.
Outside Diameter 100mm
Coil Length 50m
Please note that this duct does not include drawstring.
Close
100mm Perforated Land Drainage Pipe
A single walled corrugated pipe, manufactured from high density polyethylene. Widely used for the collection & removal of surface water. Pipe is fully perforated and has 3 perforations per corrugation.
100mm Unperforated Land Drainage Pipe
A single walled corrugated pipe, manufactured from high density polyethylene. Widely used as a carrier pipe for surface water drainage. Available in 50m coils.
100mm x 75mm Cast Effect Rectangular Downpipe
Socketed with ears. For use with 170mm Deepstyle Cast Effect Guttering.
105mm Cast Effect Round Downpipe
Socketed with ears. For use with 170mm Deepstyle Cast Effect Guttering.
Close
106mm Prostyle Cast Iron Effect Gutter
Sleek lines and modern styling provide a contemporary finish with a quality Cast Iron look and feel. Offering a modern twist on heritage styling, the Prostyle system is ideally suited...
11.25 Degree Bend (160mm)
Single socketed bend for 160mm undergorund pipe
1100 Litre Slimline Bunded Oil Tank
Harlequin 1100 Litre integrally bunded oil tank, moulded from durable medium density polyethylene, with inner tank vent and moulded-in handles for ease of lifting.Tank features bottom outlet (1” BSP female thread),...
110mm Black PVC Pipe x 3m
A UV stable pipe with a pushfit ring seal suitable for use as either a downpipe (particularly with Brett Martin 170mm Deepstyle High Capacity Guttering) or in a soil stack system....
110mm Cast Effect Soil Pipe 2.5m
Incorporating traditional cast iron detailing with all the benefits of a plastic system, Cast Effect Soil pipe complements any Cast Effect Rainwater System. With a realistic cast iron finish, this system provides...
110mm Coupler
Double socketed.
110mm Perforated Socketed Pipe
*Available for Local Delivery and Collection only* A half perforated pipe suitable for use in domestic soakaway systems or for surface water drainage. Socketed at one end for easy jointing....
Close
110mm Single Socket Pipe
*Available for Local Delivery and Collection only*
Available in lengths of 3 metres or 6 metres. Socketed at one end for easy jointing.
110mm Soil Pipe Weathering Collar (Cast Effect)
For use where a soil vent pipe penetrates the roof covering, this fitting diverts rainwater away.
110mm x 5" Adaptor Coupling
Flexible rubber adaptor coupling for connecting pipes with an different outside diameter, in non-pressure systems. This coupler will join a pipe with an outside diameter of 110-121mm to a pipe...
110mm x 7" Adaptor Coupling
Flexible rubber adaptor coupling for connecting pipes with an different outside diameter, in non-pressure systems. This coupler will join a pipe with an outside diameter of 110-122mm to a pipe...
110mm/4" Drain Coupler
Flexible rubber coupling, ideal as a repair joint, for connecting pipes with an outside diameter between 100 to 115mm in non-pressure systems. Drain Couplings comprise a moulded EPDM sleeve which is attached...
112.5 degree Branch (68mm Cast Effect)
Branch for 68mm Round Cast Effect Downpipe with a 112.5 degree spur. Combine with a 112.5 degree Spigot Bend.
112.5 degree Soil Pipe Bend (110mm Cast Effect)
112.5 degree bend 110mm Cast Iron Effect Soil System Pipe.
Available as Single Socket only.
Black
112.5º Bend (110mm PVC)
Single ring seal pushfit socket bend for use in 110mm PVC Rainwater and Soil stack assemblies.
Black
112.5º Bottom Offset Bend (110mm PVC)
112.5 degree bend for use as bottom half of downpipe offset. With single solvent weld socket and one plain end.
Black
112.5º Top Offset Bend (110mm PVC)
112.5 degree bend with one ring-seal push-fit socket and one solvent weld socket. For use as part of an offset in a 110mm Rainwater System.
112mm Roundstyle Black PVC Gutter
Roundstyle is a traditional 112mm half round system suitable for the domestic housing market. The Roundstyle system utilises 68mm round downpipe and fittings.
Width 112mm Depth 51mm
Length 4m
Colour Black
Close
112mm Roundstyle Cast Iron Effect Gutter
Width 112mm Depth 51mm
Available in 2 metre and 4 metre lengths.
112½ degree Downpipe Bend (105mm Cast Effect)
Single socketed bend for use with Brett Martin 105mm Cast Effect Round Downpipe.
Close
112½º Eared Spigot Offset Bend (68mm Cast Effect)
Offset bend with fixing lug and a spigot tail which fits inside a plain ended piece of 68mm Round Cast Effect Downpipe. Available in left-handed or right-handed orientation.
Black
112½º Offset Downpipe Bend (68mm Round PVC)
Use two of these 112½º bends to return down pipe to your wall. Use a cut length of down pipe in between, depending on your soffit depth.
112½º Spigot Offset Bend (65mm Cast Effect)
112½ degree Bend with a Spigot for creating your own offsets for Brett Martin 65mm Square Cast Effect Downpipe.
112½º Spigot Offset Bend (68mm Cast Effect)
Offset bend with spigot tail which fits inside a plain ended piece of 68mm Round Cast Effect Downpipe.
115mm Deepstyle Black PVC Gutter
A semi elliptical gutter that offers more effective rainwater drainage on larger roof areas. Offers an increase of 50% in flow capacity compared to the 112mm Roundstyle, potentially reducing the number of downpipe...
115mm Deepstyle Cast Iron Effect Gutter
Combining period Cast Iron detailing and styling, Deepstyle is a higher capacity semi elliptical rainwater system, providing greater drainage efficiency on larger roof areas. Width 115mm Depth 75mm Available in 4...
115mm Offset (105mm Cast Effect)
Preformed 112½º "swan neck" bend for use with Brett Martin 105mm Cast Effect Round Downpipe. Offset projection is measured from centre to centre.
115mm Offset (68mm Cast Effect)
112½º "swan neck" bend to return downpipe to your wall. For sizing, measure your soffit depth and then select the next size up.
115mm Square Offset (65mm Cast Effect)
112½º "swan neck" bend to return downpipe to your wall. For sizing, measure your soffit depth and then select the next size up.
Close
11¼ Degree Bend (110mm)
Bend for 110mm underground pipe. Available single socketed or double socketed.
12 Gallon Water Trough
The DT10 (53L/12 Gal) water trough is manufactured from tough, impact resistant and UV protected polyethylene which is designed with smooth edges for animal safety. The single reservoir and low profile...
Close
12.5mm (1/2") Torsino Plus Hose
12.5mm/½" (Internal Diameter) Garden hose. The Torsino Plus Anti Torsion Hose uses an advanced manufacturing process to create a knot free, kink resistant flexible PVC braided hose. PHTHLATE-FREE and applicable...
1200 Litre Low Profile Bunded Oil Tank
Harlequin 1200 Litre integrally bunded oil tank, moulded from durable medium density polyethylene, with inner tank vent and moulded-in handles for ease of lifting.Tank features bottom outlet (1” BSP female thread),...
1225 Litre Slimline Bunded Oil Tank
Harlequin 1225 Litre integrally bunded Slimline oil tank, ideal for use when space is at a premium and additional tank technology is not a requirement. Made from Medium Density Polyethylene...
1300 Litre Slimline Bunded Oil Tank
Harlequin 1300 Litre integrally bunded oil tank, moulded from durable medium density polyethylene, with inner tank vent and moulded-in handles for ease of lifting.Tank features bottom outlet (1” BSP female thread),...
Black
135 degree Angle (Deepstyle PVC)
Angled corner fitting for 115mm Black Deepstyle PVC gutter. Double socketed with integral flexible clips that allow quick and easy snap together assembly on to the gutter length.
135 degree Branch (68mm Cast Effect)
Branch for 68mm Round Cast Effect Downpipe with a 135 degree spur. Combine with a 135 degree Bend.
Black
135 degree Gutter Angle (Roundstyle PVC)
Angled corner fitting for 112mm Black Roundstyle PVC gutter.
135 degree Gutter Angle - Deepstyle (Cast Iron Effect)
Fits over gutter ends to direct water flow around a corner.
135 degree gutter angle - Roundstyle (Cast Iron Effect)
Fits over gutter ends to direct water flow around a corner.
135 degree Soil Pipe Bend (110mm Cast Effect)
112.5 degree bend 110mm Cast Iron Effect Soil System Pipe.
Available as Double Socket only.
135° Bend (68mm Cast Effect)
135 degree bend for use with 68mm Round Cast Effect Downpipe.
135° Spigot Offset Bend (65mm Cast Effect)
135 degree bend with spigot for creating your own offset with Brett Martin 65mm Square Cast Effect Downpipe.
Black
Close
135º Bend (110mm PVC)
Pushfit ring seal socketed bend for use in 110mm PVC Rainwater and Soil stack assemblies. Available single socketed or double socketed.
1400 Litre Horizontal Bunded Oil Tank
Harlequin 1400 Litre integrally bunded oil tank, moulded from durable medium density polyethylene, with inner tank vent and moulded-in handles for ease of lifting.Tank features bottom outlet (1” BSP female thread),...
Close
150mm Twin Wall
Plain ended pipe (Collar and ring seals sold separately). Available unperforated or perforated.
Inside diameter 150mm
Outside diameter 178mm
Length 6 metres
150mm 15 Degree Twin Wall Bend
Double socket bend for 150mm (internal)/178mm (external) twin wall pipe. For a watertight seal optional sealing rings are available (2 required per bend).
150mm 30 Degree Twin Wall Bend
Double socket bend for 150mm (internal)/178mm (external) twin wall pipe. For a watertight seal optional sealing rings are available (2 required per bend).
150mm 45 Degree Twin Wall Bend
Double socket bend for 150mm (internal)/178mm (external) twin wall pipe. For a watertight seal optional sealing rings are available (2 required per bend).
150mm 90 Degree Twin Wall Bend
Double socket bend for 150mm (internal)/178mm (external) twin wall pipe. For a watertight seal optional sealing rings are available (2 required per bend).
150mm Offset (105mm Cast Effect)
Preformed 112½º "swan neck" bend for use with Brett Martin 105mm Cast Effect Round Downpipe. 150mm projection is from centre to centre.
150mm Offset (68mm Cast Effect)
112½º "swan neck" bend to return downpipe to your wall. For sizing, measure your soffit depth and then select the next size up.
150mm Square Offset (65mm Cast Effect)
112½º "swan neck" bend to return downpipe to your wall. For sizing, measure your soffit depth and then select the next size up.
150mm Twin Wall "Y" Branch
Triple socket branch with a 45 degree spur for 150mm (internal)/178mm (external) twin wall pipe. For a watertight seal optional sealing rings are available (3 required per branch).
150mm Twin Wall Collar
For joining 150mm (internal)/178mm (external) twin wall pipes. Optional sealing rings available for watertight connection (2 required per collar).
150mm Twin Wall Sealing Ring
Seals ensure a waterproof and secure connection when used with 150mm (ID)/178mm (OD) twin wall pipe.
150mm Twin Wall Tee Branch
Triple socket branch with 90 degree spur for 150mm (internal)/178mm (external) twin wall pipe. For a watertight seal optional sealing rings are available (3 required per branch).
15mm Copper Adaptor (20mm)
Simply insert into fitting to join 20mm (OD) MDPE pipe to 15mm above ground (Table X) or below ground (Table Y) copper pipe.
160 to 110mm Level Invert Reducer
Transition fitting to join 110mm and 160mm pipe. With a 160mm pipe spigot and a 110mm socket.
160 to 110mm Reducing "Y" Branch
Triple Socketed Reducing branch with a 45 degree spur, which allows connection of 110mm pipework into a 160mm system.
160 to 110mm Reducing Tee Branch
Triple Socketed reducing branch with an 87½ degree spur for connection of 110mm pipework into a 160mm system.
160mm Connector for Land Drainage Pipe
Straight connector for 160mm single walled land drainage pipe
160mm Multi-Junction for Land Drainage Pipe
Cut out at one end to connect from 60 - 160mm land drainage pipe to 160mm land drainage pipe.
160mm Perforated Land Drainage Pipe
Single walled corrugated pipe, manufactured from high density polyethylene. Widely used for the collection & removal of surface water. Pipe is fully perforated and has 3 perforations per corrugation. Available...
Close
160mm Single Socket Pipe
*Available for Local Delivery and Collection only*
Available in 3 metre and 6 metre lengths. Socketed at one end for easy jointing.
160mm Unperforated Land Drainage Pipe
Single walled corrugated pipe, manufactured from high density polyethylene. Widely used as a carrier pipe for surface water drainage.
Available in 50m coils.
160mm x 7-8" Adaptor Coupling
Flexible rubber adaptor coupling for connecting pipes with an different outside diameter, in non-pressure systems. This coupler will join a pipe with an outside diameter of 160-180mm to a pipe...
160mm/6" Drain Coupler
Flexible rubber coupling, ideal as a repair joint, for connecting pipes with an outside diameter between 150 to 165mm in non-pressure systems. Drain Couplings comprise a moulded EPDM sleeve which is attached...
170mm 90° Black PVC Gutter Angle
90 degree corner fitting for Brett Martin 170mm Black PVC Deepstyle guttering.
170mm Black PVC Deepstyle Gutter
A high performance industrial rainwater system with greater drainage capacity. The larger profile enables roofs to be drained more efficiently and effectively, making the system ideal for large commercial properties,...
170mm Black PVC External Stopend
End cap for Brett Martin 170mm Black PVC Deepstyle guttering. Fits over gutter end.
170mm Black PVC Fascia Bracket
Gutter support bracket for attachment to fascia board or rafter end. For use with Brett Martin 170mm Black PVC Deepstyle gutter.
170mm Black PVC Internal Stopend
End cap for Brett Martin 170mm Black PVC Deepstyle guttering. Fits inside socket
170mm Black PVC Running Outlet
Double socketed outlet fitting for Brett Martin 170mm Black PVC Deepstyle guttering. Outlet size 110mm
170mm Black PVC Union Bracket
Joining bracket for Brett Martin 170mm Black PVC Deepstyle guttering. With 2 fixing points for fascia board attachment and optional centre fixing point (not drilled).
Close
170mm Cast Effect Deepstyle Gutter
This High Capacity Cast Iron Style Rainwater System is ideally suited to traditionally styled buildings with larger roof areas. Period style detailing combined with very high levels of roof drainage...
Close
19mm (3/4") Torsino Hose
19mm/¾" (Internal Diameter) garden hose. The Torsino NTS (No Torsion System) Hose uses an advanced manufacturing process to create a knot free, kink resistant flexible PVC braided hose. This is...
1½ Inch Double Check Valve (50mm)
Kiwa UK Water Reg4 approved double check valve. With 1½ inch female threaded connection. Requires 2no. 50mm Male Thread Adaptor x 1½ inch for connection to 50mm water pipe.
2 Inch Double Check Valve (63mm)
Kiwa UK Water Reg4 approved double check valve. With 2 inch female threaded connection. Requires 2no. 63mm Male Thread Adaptor x 2 inch for connection to 63mm water pipe.
2000 Litre Horizontal Bunded Oil Tank
Harlequin 2000 Litre integrally bunded Horizontal oil tank, suitable for the storage of heating oil in a domestic or commercial set up. Made from Medium Density Polyethylene (MDPE), this tank is lightweight, durable,...
20mm Blue MDPE Water Pipe
SC80 (PE80) Polyethylene Light Blue Pipe for the supply of clean water.
12 bar pressure rating (SDR9)
Outside diameter 20mm (15.4mm internal)
Available in Coil sizes: 25m, 50m, 100m, 150m
225mm 15 Degree Twin Wall Bend
Double socket bend for 225mm (internal)/268mm (external) twin wall pipe. For a watertight seal optional sealing rings are available (2 required per bend)
225mm 30 Degree Twin Wall Bend
Double socket bend for 225mm (internal)/268mm (external) twin wall pipe. For a watertight seal optional sealing rings are available (2 required per bend).
225mm 45 Degree Twin Wall Bend
Double socket bend for 225mm (internal)/268mm (external) twin wall pipe. For a watertight seal optional sealing rings are available (2 required per bend).
225mm 90 Degree Twin Wall Bend
Double socket bend for 225mm (internal)/268mm (external) twin wall pipe. For a watertight seal optional sealing rings are available (2 required per bend).
225mm to 150mm Twin Wall Reducing "Y" Branch
Triple socket branch for 225mm (ID)/268mm (OD) twin wall pipe with a 45 degree spur for 150mm (ID)/178mm (OD) twin wall pipe. For a watertight seal optional sealing rings are available (2...
225mm to 150mm Twin Wall Reducing Tee Branch
Triple socket branch for 225mm (ID)/268mm (OD) twin wall pipe with a 90 degree spur for 150mm (ID)/178mm (OD) twin wall pipe. For a watertight seal optional sealing rings are available (2...
Close
225mm Twin Wall
Plain ended pipe (Collar and ring seals sold separately). Available unperforated or perforated.
Inside diameter 225mm
Outside diameter 268mm
Length 6 metre
225mm Twin Wall "Y" Branch
Triple socket branch with 45 degree spur for 225mm (internal)/268mm (external) twin wall pipe. For a watertight seal optional sealing rings are available (3 required per branch).
225mm Twin Wall Collar
For joining 225mm (internal)/268mm (external) twin wall pipes. Optional sealing rings available for watertight connection (2 required per collar).
225mm Twin Wall Sealing Ring
Seals ensure a waterproof and secure connection when used with 225mm (ID)/268mm (OD) twin wall pipe.
225mm Twin Wall Tee Branch
Triple socket branch with 90 degree spur for 225mm (internal)/268mm (external) twin wall pipe. For a watertight seal optional sealing rings are available (3 required per branch).
Close
22½ Degree Bend (110mm)
Bend for 110mm underground pipe. Available single socketed or double socketed.
22½ Degree Bend (160mm)
Single socketed bend for 160mm undergorund pipe
230mm Offset (105mm Cast Effect)
Preformed 112½º "swan neck" bend for use with Brett Martin 105mm Cast Effect Round Downpipe. 230mm projection is centre to centre.
230mm Offset (68mm Cast Effect)
112½º "swan neck" bend to return downpipe to your wall. For sizing, measure your soffit depth and then select the next size up.
250 Litre ATV Tipping Trailer
The JFC 250L ATV Trailer is manufactured from tough, impact resistant polyethylene and is fitted with 2 pneumatic wheels, a galvanised chassis and an easy-to-use tipping mechanism. The heavy duty...
Close
250 Litre Tipping Wheelbarrow
The JFC 250L Tipping Wheelbarrow is perfect for use both on the farm, the yard and for general duties. The innovative tipping design means that it can be tipped with minimal...
2500 Litre Horizontal Bunded Oil Tank
Harlequin 2500 Litre integrally bunded Horizontal oil tank, suitable for the storage of heating oil in a domestic or commercial set up. Made from Medium Density Polyethylene (MDPE), this tank is lightweight, durable,...
25mm Blue MDPE Water Pipe
SC80 (PE80) Polyethylene Light Blue Pipe for the supply of clean water.
12 bar pressure rating (SDR11)
Outside diameter 25mm (20.4mm internal)
Available in Coil sizes: 25m, 50m, 100m, 150m
Close
25mm Microflex Primo Duo Heating Pipe Kit
Double, flexible, pre-insulated, self-compensating, underground pipe especially suitable for heating water, but also for (hot) potable water, wastewater and other fluids. 25mm Microflex Primo Duo consits of two PE-X transport...
Close
25mm Microflex Quadro Pipe
A quadruple, flexible, pre-insulated, self-compensating, underground pipe with two heating water pipes, a sanitary hot water pipe and a circulation loop pipe. These are enveloped within CFC-free foam insulation, and encased in...
280mm 90 Degree Shallow Access Inspection Chamber Base
Unique 90 degree design. For use with 110mm pipework. Suitable for inverts of up to 600mm.
Depth 205mm
280mm Shallow Access Inspection Chamber Base
For use with 110mm pipework, with straight through inlet and outlet, plus one inlet each side at 45 degrees. Supplied with 2 socket plugs. Suitable for inverts of up to 600mm.
Depth 205mm
280mm Shallow Access Inspection Chamber Riser
Raising piece for inspection chamber. Robust ribbed design with seals to provide watertight fit. Height 185mm. Only two required to achieve 600mm maximum invert (with base and lid & frame).
28mm Copper Pipe Adaptor Set (32mm)
Simply insert into fitting to join PE pipe to above ground (Table X) or below ground (Table Y) copper pipe.
Available to join 32mm (OD) PE to 28mm Copper
30 Gallon Fast Fill Water Trough
The DT30FF (136L/30 Gal) premium water trough is manufactured from tough, impact resistant polyethylene and has a smooth black polished finish designed specifically for animal safety. The trough features an...
300mm 15 Degree Twin Wall Bend
Double socket bend for 300mm (internal)/353mm (external) twin wall pipe. For a watertight seal optional sealing rings are available (2 required per bend).
300mm 30 Degree Twin Wall Bend
Double socket bend for 300mm (internal)/353mm (external) twin wall pipe. For a watertight seal optional sealing rings are available (2 required per bend).
300mm 45 Degree Twin Wall Bend
Double socket bend for 300mm (internal)/353mm (external) twin wall pipe. For a watertight seal optional sealing rings are available (2 required per bend).
300mm 90 Degree Twin Wall Bend
Double socket bend for 300mm (internal)/353mm (external) twin wall pipe. For a watertight seal optional sealing rings are available (2 required per bend).
300mm C250 Gully Grate
*Heavy item - Available for Local Delivery/Collection only* For use with 300mm diameter gully pots. 25 Tonne safe test load hinged grating suitable for carriageway applications (not exceeding 500mm from...
300mm Square Recessed Cover for Screed Infill
10 Tonne (GLVW) loading recessed covers designed to be in-filled with a screed or concrete, featuring four locking screws and a rubber neoprene seal to prevent odour egress. Ideal for indoor...
300mm to 150mm Twin Wall Reducing "Y" Branch
Triple socket branch for 300mm (ID)/353mm (OD) twin wall pipe with a 45 degree spur for 150mm (ID)/178mm (OD) twin wall pipe. For a watertight seal optional sealing rings are available (2...
300mm to 150mm Twin Wall Reducing Tee Branch
Triple socket branch for 300mm (ID)/353mm (OD) twin wall pipe with a 90 degree spur for 150mm (ID)/178mm (OD) twin wall pipe. For a watertight seal optional sealing rings are available (2...
300mm to 225mm Twin Wall Reducing "Y" Branch
Triple socket branch for 300mm (ID)/353mm (OD) twin wall pipe with a 45 degree spur for 225mm (ID)/268mm (OD) twin wall pipe. For a watertight seal optional sealing rings are available.
300mm to 225mm Twin Wall Reducing Tee Branch
Triple socket branch for 300mm (ID)/353mm (OD) twin wall pipe with 90 a degree spur for 225mm (ID)/268mm (OD) twin wall pipe. For a watertight seal optional sealing rings are available...
Close
300mm Twin Wall
Plain ended pipe (Collar and ring seals sold separately). Available unperforated or perforated.
Inside diameter 300mm
Outside diameter 353mm
Length 6 metre
300mm Twin Wall "Y" Branch
Triple socket branch with a 45 degree spur for 300mm (internal)/353mm (external) twin wall pipe. For a watertight seal optional sealing rings are available (3 required per branch).
300mm Twin Wall Collar
For joining 300mm (internal)/353mm (external) twin wall pipes. Optional sealing rings available for watertight connection (2 required per collar).
300mm Twin Wall Sealing Ring
Seals ensure a waterproof and secure connection when used with 300mm (ID)/353mm (OD) twin wall pipe.
300mm Twin Wall Tee Branch
Triple socket branch with 90 degree spur for 300mm (internal)/353mm (external) twin wall pipe. For a watertight seal optional sealing rings are available (3 required per branch).
305mm Offset (105mm Cast Effect)
Preformed 112½º "swan neck" bend for use with Brett Martin 105mm Cast Effect Round Downpipe. 305mm projection is from centre to centre.
305mm Offset (68mm Cast Effect)
112½º "swan neck" bend to return downpipe to your wall. For sizing, measure your soffit depth and then select the next size up.
315mm Shallow Access Inspection Chamber Base
Suitable for inverts of up to 600mm, for use with 110mm pipework. Features straight through inlet and outlet, with an inlet each side at 90 degrees, plus an inlet each...
315mm Shallow Access Inspection Chamber Riser
Raising piece for 315mm diameter Shallow Access Inspection chamber. Robust ribbed design with seals to provide watertight fit. Height 185mm. Only two required to achieve 600mm maximum invert (with base and lid...
32mm Blue MDPE Water Pipe
SC80 (PE80) Polyethylene Light Blue Pipe for the supply of clean water.
12 bar pressure rating (SDR11)
Outside diameter 32mm (26mm internal)
Available in Coil sizes: 25m, 50m, 100m, 150m
Close
32mm Microflex Primo Duo Heating Pipe Kit
Double, flexible, pre-insulated, self-compensating, underground pipe especially suitable for heating water, but also for (hot) potable water, wastewater and other fluids. 32mm Microflex Primo Duo consits of two PE-X transport...
Close
32mm Microflex Quadro Pipe
A quadruple, flexible, pre-insulated, self-compensating, underground pipe with two heating water pipes, a sanitary hot water pipe and a circulation loop pipe. These are enveloped within CFC-free foam insulation, and encased in...
375mm Twin Wall
Available unperforated. Price for perforated available on request. Inside diameter 375mm. Outside diameter 426mm. 6 metre lengths. Collar and ring seals sold separately.
375mm Twin Wall Collar
For joining 375mm (internal)/426mm (external) twin wall pipes. Optional sealing rings available for watertight connection (2 required per collar).
375mm Twin Wall Sealing Ring
Seals ensure a waterproof and secure connection when used with 375mm (ID)/426mm (OD) twin wall pipe.
380mm Offset (105mm Cast Effect)
Preformed 112½º "swan neck" bend for use with Brett Martin 105mm Cast Effect Round Downpipe. 380mm projection is from centre to centre.
380mm Offset (68mm Cast Effect)
112½º "swan neck" bend to return downpipe to your wall. For sizing, measure your soffit depth and then select the next size up.
385 x 320mm C250 Gully Grate
*Heavy item - Available for Local Delivery/Collection only* For use with 300mm diameter gully pots. 25 Tonne safe test load hinged grating BSI Kitemark Certified to BS EN124:1994. Constructed of...
Blue
Green
Close
4 Litre Micro Drink Bowl
The DBL4 drink bowl is manufactured from tough, impact resistant polyethylene and has a smooth finish and a curved design specifically for animal safety. The drink bowl is designed with...
400 Litre ATV Tipping Trailer
The JFC 400L ATV Trailer is ideally suited for ATV's or Quad bikes. The 400L tipping trailer is manufactured from tough, impact resistant polyethylene and is fitted with 2 pneumatic wheels, a galvanised...
400 Litre Tipping Wheelbarrow
The JFC 400L Tipping Wheelbarrow is perfect for use both on the farm, the yard and for general duties. The innovative tipping design means that it can be tipped with minimal...
45 Degree "Y" Branch (110mm)
Triple Socketed equal junction with a 45 degree spur.
Close
45 Degree Bend (110mm)
Bend for 110mm underground pipe. Available single socketed or double socketed.
45 Degree Bend (160mm)
Single Socketed bend for 160mm underground pipe.
45-degree"Y" Branch (160mm)
Triple Socketed Equal junction with a 45-degree spur.
450mm diameter B125 Ductile Iron Cover & Frame
12.5 Tonne safe test load cover and frame suitable for car parks and footways, constructed of ductile iron for improved weight to strength ratio. Slide-out units are un-sealed to allow...
Close
450mm Inspection Chamber Base
450mm diameter Inspection chamber base with 5 inlets, and 1 outlet, supplied with 3 socket plugs. For use with either 110mm and 160mm pipework (160mm option features two 110mm inlets). Suitable...
450mm Inspection Chamber Cover & Frame
Drivway duty secured lid in frame for 450mm diameter access chamber. Suitable for driveway use (withstands 50kN). Bedding frame in concrete recommended.
450mm Inspection Chamber Ring Seal
Creates a watertight fit from base to riser and riser to riser.
Close
450mm Inspection Chamber Riser
Raising piece for 450mm diameter inspection chamber. Effective height 300mm. Sealing ring to enusre watertightness also available.
450mm Square Recessed Cover for Screed Infill
5 Tonne (Gross Plated Weight) loading sealed & locked recessed cover designed to be in-filled with a screed or concrete, recommended for indoor use. Fully galvanised tray with a polypropylene square...
450mm Twin Wall
Plain ended pipe (Collar and ring seals sold separately). Available unperforated only.
Inside diameter 450mm
Outside diameter 512mm
Length 6 metre
450mm Twin Wall Collar
For joining 450mm (internal)/512mm (external) twin wall pipes. Optional sealing rings available for watertight connection (2 required per collar).
450mm Twin Wall Sealing Ring
Seals ensure a waterproof and secure connection when used with 450mm (ID)/512mm (OD) twin wall pipe.
450mm x 450mm Duct Access Box
Lightweight and easy to install duct access chamber section with pre-trepanned duct entry points accepting 63mm, 90mm, 110mm, 120mm, 145mm and 160mm OD ducting for multiple applications.Interlocking edges for stacking...
455mm Offset (105mm Cast Effect)
Preformed 112½º "swan neck" bend for use with Brett Martin 105mm Cast Effect Round Downpipe. 455mm projection is from centre to centre.
455mm Offset (68mm Cast Effect)
112½º "swan neck" bend to return downpipe to your wall. For sizing, measure your soffit depth and then select the next size up.
50/63mm Coiled Electric Duct x 50m
An unperforated, coiled twin wall pipe complete with jointing collar and drawstring.
Internal Diameter 50mm
Outside Diameter 63mm
Coil Length 50m
Manufactured to BSEN50086-2.4.
50/63mm Coiled Green Duct x 50m
An unperforated, coiled twin wall pipe complete with jointing collar and drawstring, typically for use as ducting for Closed Circuit Television Cables.
Internal Diameter 50mm
Outside Diameter 63mm
Coil Length 50m
50/63mm Coiled Orange Duct x 50m
An unperforated, coiled twin wall pipe complete with jointing collar and drawstring, for use as ducting for Street Lighting or Traffic Signals.
Internal Diameter 50mm
Outside Diameter 63mm
Coil Length 50m
50/63mm Coiled Purple Duct x 50m
An unperforated, coiled twin wall pipe complete with jointing collar and drawstring, for use as ducting for Motorway Communications.
Internal Diameter 50mm
Outside Diameter 63mm
Coil Length 50m
50/63mm Coiled Water Duct x 50m
An unperforated, coiled twin wall pipe complete with jointing collar and drawstring, for use as ducting for water pipes.
Internal Diameter 50mm
Outside Diameter 63mm
Coil Length 50m
50/63mm Unperforated Gas Duct Coil x 50m
An unperforated, coiled twin wall pipe complete with jointing collar and drawstring, for use as ducting for gas main.
Internal Diameter 50mm
Outside Diameter 63mm
Coil Length 50m
500 Litre ATV Tipping Trailer
The JFC 500L ATV Trailer is ideally suited for ATVs or Quad bikes. The 500L tipping trailer is manufactured from tough, impact resistant polyethylene and is fitted with 2 pneumatic wheels, a...
500 Litre Tipping Wheelbarrow
The JFC 500L Tipping Wheelbarrow is perfect for use both on the farm, the yard and for general duties. The innovative tipping design means that it can be tipped with minimal...
50mm Blue MDPE Water Pipe
SC80 (PE80) Polyethylene Light Blue Pipe for the supply of clean water.
12 bar pressure rating (SDR11)
Outside diameter 50mm (40mm internal)
Available in Coil sizes: 25m, 50m, 100m
50mm Plinth Offset with Lugs (68mm Cast Effect)
Plinth offset ideal for stepping out over brick plinth. With fixing lugs.
50mm Plinth Square Offset (65mm Cast Effect)
With lugs.
600 x 450mm Square Recessed Cover for Screed Infill
10 Tonne (GLVW) loading recessed covers designed to be in-filled with a screed or concrete, featuring four locking screws and a rubber neoprene seal to prevent odour egress. Ideal for indoor...
600mm Square Recessed Cover for Screed Infill
10 Tonne (GLVW) loading recessed covers designed to be in-filled with a screed or concrete, featuring four locking screws and a rubber neoprene seal to prevent odour egress. Ideal for indoor...
600mm Twin Wall
Plain ended pipe (Collar and ring seals sold separately). Available unperforated only.
Inside diameter 600mm
Outside diameter 680mm
Length 6 metre
600mm Twin Wall Collar
For joining 600mm (internal)/680mm (external) twin wall pipes. Optional sealing rings available for watertight connection (2 required per collar).
600mm Twin Wall Sealing Ring
Seals ensure a waterproof and secure connection when used with 600mm (ID)/680mm (OD) twin wall pipe.
600mm x 450mm A15 Cover & Frame
*Heavy item - Available for Local Delivery/Collection only* 1.5 Tonne safe test load Light Duty grey iron cover and frame suitable for pedestrian and pedal cyclist areas. Coated black finish....
600mm x 450mm B125 Ductile Iron Cover & Frame
*Heavy item - Available for Local Delivery/Collection only* 12.5 Tonne safe test load cover and frame suitable for car parks and footways, constructed of ductile iron for improved weight to...
600mm x 450mm D400 Ductile Iron Cover & Frame
*Heavy item - Available for Local Delivery/Collection only* 40 Tonne safe test load cover and frame suitable for carriageway and fast moving traffic. Constructed of ductile iron for improved weight...
600mm x 450mm Duct Access Box
Lightweight and easy to install duct access chamber section with pre-trepanned duct entry points accepting 63mm, 90mm, 110mm, 120mm, 145mm and 160mm OD ducting for multiple applications.Interlocking edges for stacking...
600mm x 600mm A15 Cover & Frame
*Heavy item - Available for Local Delivery/Collection only* 1.5 Tonne safe test load Light Duty grey iron cover and frame suitable for pedestrian and pedal cyclist areas. Coated black finish....
600mm x 600mm B125 Ductile Iron Cover & Frame
*Heavy item - Available for Local Delivery/Collection only* 12.5 Tonne safe test load cover and frame suitable for car parks and footways, constructed of ductile iron for improved weight to...
600mm x 600mm D400 Ductile Iron Cover & Frame
*Heavy item - Available for Local Delivery/Collection only* 40 Tonne safe test load cover and frame suitable for carriageway and fast moving traffic. Constructed of ductile iron for improved weight...
600mm x 600mm Duct Access Box
Lightweight and easy to install duct access chamber section with pre-trepanned duct entry points accepting 63mm, 90mm, 110mm, 120mm, 145mm and 160mm OD ducting for multiple applications.Interlocking edges for stacking...
60mm Perforated Gas Duct x 50m
A perforated, single walled corrugated pipe, manufactured from high density polyethylene used for ducting gas pipe.
Outside Diameter 60mm
Coil Length 50m
Please note that this duct does not include drawstring.
63mm Blue MDPE Water Pipe
SC80 (PE80) Polyethylene Light Blue Pipe for the supply of clean water.
12 bar pressure rating (SDR11)
Outside diameter 63mm (51mm internal)
Available in Coil sizes: 25m, 50m, 100m
650 Litre Slimline Bunded Oil Tank
Harlequin 650 Litre integrally bunded Slimline oil tank, ideal for use when space is at a premium and additional tank technology is not a requirement. Made from Medium Density Polyethylene...
Close
65mm Square Cast Effect Downpipe
Socketed square downpipe with fixing lugs for use with 106mm Cast Effect Prostyle Gutter.
Available in lengths of 1.8m or 2.5m.
Close
68mm Round Black PVC Downpipe
68mm diameter PVC gloss finish round downpipe. Plain ended.
Colour Black
Length 2.5m or 4m
75mm Offset (68mm Cast Effect)
112½º "swan neck" bend to return downpipe to your wall. For sizing, measure your soffit depth and then select the next size up.
75mm Square Offset (65mm Cast Effect)
112½º "swan neck" bend to return downpipe to your wall. For sizing, measure your soffit depth and then select the next size up.
80mm Connector for Land Drainage Pipe
Straight connector for 80mm single walled land drainage pipe
Close
80mm Perforated Land Drainage Pipe
A single walled corrugated pipe, manufactured from high density polyethylene. Widely used for the collection & removal of surface water. Pipe is fully perforated and has 3 perforations per corrugation....
Close
87½ Degree Bend (110mm)
Bend for 110mm underground pipe. Available single socketed or double socketed.
Close
87½ Degree Bend (160mm)
Bend for 160mm underground pipe. Available single socketed or double socketed.
87½ Degree Rest Bend (110mm)
Double socketed bend with a longer radius, and rest stand. For use at the foot of vertical soil stacks.
87½ Degree Tee Branch (110mm)
Triple Socketed equal Junction with an 87½ degree spur.
87½ Degree Tee Branch (160mm)
Triple Socketed Equal branch for 160mm pipework with an 87½ degree spur.
90 degree Access Bend (110mm Cast Effect)
90 degree bend with rodding access point for 110mm Cast Iron Effect Soil System Pipe.
Available as Single Socket only.
Black
90 degree Angle (Deepstyle PVC)
Corner fitting for 115mm Black Deepstyle PVC gutter. Double socketed with sealed internal fixing points to prevent the necessity of handed versions.
90 Degree Elbow (20mm)
90 degree elbow for 20mm (OD) water pipe. Designed to withstand working pressures of up to 16bar.
90 Degree Elbow (25mm)
90 degree elbow to suit 25mm (OD) PE pipe. Designed to withstand working pressures of up to 16bar.
90 Degree Elbow (32mm)
90 degree elbow to suit 32mm (OD) PE pipe. Designed to withstand working pressures of up to 16bar.
90 Degree Elbow (50mm)
90 degree elbow to suit 50mm (OD) PE pipe. Designed to withstand working pressures of up to 16bar.
90 Degree Elbow (63mm)
90 degree elbow to suit 63mm (OD) PE pipe. Designed to withstand working pressures of up to 16bar.
Black
90 degree Gutter Angle (Roundstyle PVC)
Corner fitting for 112mm Black Roundstyle PVC gutter. Double socketed with concealed internal fixing points to prevent the necessity of handed versions.
90 degree Gutter Angle - 170mm Deepstyle (Cast Iron Effect)
Fits over gutter ends to direct water flow around a corner.
90 degree gutter angle - Deepstyle (Cast Iron Effect)
Fits over gutter ends to direct water flow around a corner.
90 degree gutter angle - Roundstyle (Cast Iron Effect)
Fits over gutter ends to direct water flow around a corner.
Close
90 degree Soil Pipe Bend (110mm Cast Effect)
90 degree bend 110mm Cast Iron Effect Soil System Pipe.
Available with Single Socket or Double Socket
90 Degree Tee (20mm)
90 degree junction for 20mm (OD) water pipe. Designed to withstand working pressures of up to 16bar.
90 Degree Tee (25mm)
90 degree junction for 25mm (OD) PE pipes. Designed to withstand working pressures of up to 16bar.
90 Degree Tee (32mm)
90 degree junction for 32mm (OD) PE pipes. Designed to withstand working pressures of up to 16bar.
90 Degree Tee (50mm)
90 degree junction for 50mm (OD) PE pipes. Designed to withstand working pressures of up to 16bar.
90 Degree Tee (63mm)
90 degree junction for 63mm (OD) PE pipes. Designed to withstand working pressures of up to 16bar.
90º Spigot Bend (65mm Cast Effect)
90 degree bend with spigot for use with Brett Martin 65mm Square Cast Effect Downpipe.
Black
Close
92.5º Bend (110mm PVC)
Pushfit ring seal socketed bend for use in 110mm PVC Rainwater and Soil stack assemblies. Available single socketed or double socketed.
92½º Bend (68mm Cast Effect)
Right angle bend for use with 68mm Round Cast Effect Downpipe.
92½º Downpipe Bend (105mm Cast Effect)
Single socketed bend for use with Brett Martin 105mm Cast Effect Round Downpipe.
Black
92½º Downpipe Bend (68mm Round PVC)
92½ degree bend for 68mm Round PVC Downpipe.
94/110mm Coiled Green Duct x 50m
An unperforated, coiled twin wall pipe complete with jointing collar and drawstring, typically for use as ducting for Closed Circuit Television (CCTV) Cables.
Internal Diameter 94mm
Outside Diameter 110mm
Coil Length 50m
94/110mm Coiled Purple Duct x 50m
An unperforated, coiled twin wall pipe complete with jointing collar and drawstring, for use as ducting for Motorway Communications.
Internal Diameter 94mm
Outside Diameter 110mm
Coil Length 50m
94/110mm Coiled Electric Duct x 50m
An unperforated, coiled twin wall pipe complete with jointing collar and drawstring.
Internal Diameter 94mm
Outside Diameter 110mm
Coil Length 50m
Manufactured to BSEN50086-2.4.
94/110mm Coiled Orange Duct x 50m
An unperforated, coiled twin wall pipe complete with jointing collar and drawstring, for use as ducting for Street Lighting or Traffic Signals.
Internal Diameter 94mm
Outside Diameter 110mm
Coil Length 50m
94/110mm Coiled Water Duct x 50m
An unperforated, coiled twin wall pipe complete with jointing collar and drawstring, for use as ducting for water pipes.
Internal Diameter 94mm
Outside Diameter 110mm
Coil Length 50m
94/110mm Unperforated Gas Duct Coil x 50m
An unperforated, coiled twin wall pipe complete with jointing collar and drawstring, for use as ducting for gas main.
Internal Diameter 94mm
Outside Diameter 110mm
Coil Length 50m
Black
Access Pipe (110mm PVC)
Single socketed pipe stub with removable access panel.
Close
Adjustable Bends (110mm)
Double socketed bend that can be adjusted to suit angle required.
Available for 110mm pipework in adjustable angles of 0 - 30° and 0 - 90°
Adjustable Offset Kit (68mm Cast Effect)
Adaptable offset for use if standard offsets will not suffice. Can be used for projections from 250mm to 650mm.
Adjustable Square Offset Kit (65mm Cast Effect)
Adaptable offset for use if standard offsets will not suffice. Maximum 455mm projection.
Black
Air Admittance Valve (110mm PVC)
Contains a diaphragm which under light spring pressure is normally held closed, containing foul air within the soil system. When there is a discharge from an appliance, a negative air...
Close
Aluminium Rodding Eye (110mm)
Rodding access cover for use with 110mm drainage systems. Angled at 45 degrees for use with either a "Y" branch or 45 degree bends. Available in two styles - Oval...
Anti-Splash Shoe with Lugs (68mm Cast Effect)
Outlet sits flat to prevent splashing. With ears
Anti-Splash Square Shoe with ears (65mm Cast Effect)
Outlet sits flat to prevent splashing. With ears
Close
ATV Rear Carrier Box
A strong durable plastic utility box suitable for rear positioning on most ATVs/Quads. Available in two sizes: - 150 Litre Capacity External dimensions (mm): 810L x 950W x 385H -...
Bath hopper
For use with 65mm Square and 68mm Round Cast Effect Downpipes only. The decorative Bath hopper design boasts an Acorn motif. Overall Width 380mm Width of opening 261mm Height (Top...
Bath Hopper with Lion (100 x 75mm)
Bath Rainwater Head with Lion motif for use with Brett Martin 100mm x 75mm Rectangular Cast Effect Downpipe only. Overall dimensions Width 463mm Height 420mm Depth 207mm Internal dimensions Width 360mm Height 362mm Outlet Size 100mm...
Bath Hopper with Lion (105mm)
Bath Rainwater Head with Lion motif for use with Brett Martin 105mm diameter Cast Effect Downpipe only.
Overall dimensions: Width 463mm Height 420mm Depth 207mm
Internal dimensions: Width 360mm Height 362mm
Outlet Size 105mm
Blanking plug (20mm)
Plug to be inserted into 20mm Plasson fittings to prevent water flow. Can be removed at a later time for future connection. Designed to withstand working pressures of up to 16bar....
Blanking Plug (25mm)
Plug to be inserted into 25mm Plasson fittings to prevent water flow. Can be removed at a later time for future connection. Designed to withstand working pressures of up to 16bar. *Please...
Blanking Plug (32mm)
Plug to be inserted into 32mm Plasson fittings to prevent water flow. Can be removed at a later time for future connection. Designed to withstand working pressures of up to 16bar.
Blanking Plug (50mm)
Plug to be inserted into 50mm Plasson fittings to prevent water flow. Can be removed at a later time for future connection. Designed to withstand working pressures of up to 16bar.
Blanking Plug (63mm)
Plug to be inserted into 63mm Plasson fittings to prevent water flow. Can be removed at a later time for future connection. Designed to withstand working pressures of up to 16bar.