Start typing to see products you are looking for.
  • Menu

Shopping cart

Close
Menu
Start typing to see products you are looking for.
  • Bidford-on-Avon, B50 4JH
  • 01789 491200
  • Mon - Fri 7.30am - 5pm

Cascade is a range of gutter and downpipe profiles which provides authentic traditional cast iron style in plastic. A unique patented manufacturing process combines with authentic cast iron architectural detailing on pipe work, fittings and hoppers to give the full appearance of cast iron with all the benefits of modern plastic materials.

Please call to ask us about heritage colours, now available in Anthracite Grey, Oxford Blue, Chartwell Green, Olive Green, Graphite Grey, Sandstone & Porcelain White.

10 year manufacturers warranty.

Click here for installation guide.

 

Show sidebar
Show 16 22 44 All

    106mm Prostyle Cast Iron Effect Gutter

    £22.20
    Sleek lines and modern styling provide a contemporary finish with a quality Cast Iron look and feel. Offering a modern twist on heritage styling, the Prostyle system is ideally suited...

    112mm Roundstyle Cast Iron Effect Gutter

    £13.95
    Width 112mm Depth 51mm Available in 2 metre and 4 metre lengths.

    115mm Deepstyle Cast Iron Effect Gutter

    £39.90
    Combining period Cast Iron detailing and styling, Deepstyle is a higher capacity semi elliptical rainwater system, providing greater drainage efficiency on larger roof areas. Width 115mm Depth 75mm Available in 4...

    170mm Cast Effect Deepstyle Gutter

    £34.75
    This High Capacity Cast Iron Style Rainwater System is ideally suited to traditionally styled buildings with larger roof areas. Period style detailing combined with very high levels of roof drainage...

    65mm Square Cast Effect Downpipe

    £30.45
    Socketed square downpipe with fixing lugs for use with 106mm Cast Effect Prostyle Gutter. Available in lengths of 1.8m or 2.5m.

    Cast Iron Effect Guttering - 68mm Round Downpipe

    £25.75
    Socketed with ears. For use with 112mm Roundstyle and 115mm Deepstyle guttering. Available in lengths of 1.8m and 2.5m.

    105mm Cast Effect Round Downpipe

    £43.55
    Socketed with ears. For use with 170mm Deepstyle Cast Effect Guttering.

    Fascia Bracket - Prostyle (Cast Iron Effect)

    £3.95
    Attaches to fascia or roof rafter with a screw.

    Downpipe Clip (68mm Cast Effect)

    £4.35
    Fixing bracket for use with 68mm Round Cast Effect Downpipe. It is recommended that these are used intermediately to ensure pipe alignment is maintained, especially on uneven brickwork.

    Union Bracket - Prostyle (Cast Iron Effect)

    £11.10
    Bracket for joining two pieces of gutter together.

    Union Bracket - Deepstyle (Cast Iron Effect)

    £11.05
    Bracket for joining two pieces of gutter together.

    Downpipe Coupler (65mm Cast Effect)

    £9.45
    Jointing collar for use with 65mm Square Cast Effect Downpipe.

    Coupler with Lugs (68mm Cast Effect)

    £8.10
    Jointing coupler for 68mm Round Cast Effect Downpipe. With fixing lugs.

    Downpipe Coupler with Lugs (105mm Cast Effect)

    £15.50
    Jointing coupler with fixing lugs for use with Brett Martin 105mm Cast Effect Round Downpipe.

    Running Outlet - Roundstyle (Cast Iron Effect)

    £10.45
    Enables water to flow from gutter into downpipe.

    Internal Stop End - Roundstyle (Cast Iron Effect)

    £4.75
    Fits into socket to prevent water from flowing out of gutter. Can be used with a running outlet to create a stop end outlet.

    Internal Stop End - 170mm Deepstyle (Cast Iron Effect)

    £8.90
    Fits into socket to prevent water from flowing out of gutter. Can be used with a running outlet to create a stop end outlet.

    External Stop End - Roundstyle (Cast Iron Effect)

    £5.45
    Fits over end of gutter to prevent water running out.

    135 degree gutter angle - Roundstyle (Cast Iron Effect)

    £11.10
    Fits over gutter ends to direct water flow around a corner.

    Top Fix Rafter Bracket (Galvanised)

    £7.60
    Use with a fascia bracket to fix guttering to properties with open eaves. Simply attach this bracket to the top side of the rafter at the eaves, the fascia bracket is attached...

    Socket Shroud Plain (110mm Cast Effect)

    £7.15
    Fits over 110mm Cast Iron Effect soil pipe socket for a more pleasing aesthetic effect.

    Socket Shroud with Lugs (110mm Cast Effect)

    £7.15
    Optional shroud fitting which fits over soil pipe clip for a more pleasing aesthetic effect. Please note that this is not a fixing bracket.

    75mm Offset (68mm Cast Effect)

    £12.30
    112½º "swan neck" bend to return downpipe to your wall. For sizing, measure your soffit depth and then select the next size up.

    Adjustable Offset Kit (68mm Cast Effect)

    £27.65
    Adaptable offset for use if standard offsets will not suffice. Maximum 455mm projection.

    112½º Spigot Offset Bend (68mm Cast Effect)

    £13.85
    Offset bend with spigot tail which fits inside a plain ended piece of 68mm Round Cast Effect Downpipe.

    135° Bend (68mm Cast Effect)

    £11.50
    135 degree bend for use with 68mm Round Cast Effect Downpipe.

    92½º Bend (68mm Cast Effect)

    £11.50
    Right angle bend for use with 68mm Round Cast Effect Downpipe.

    112.5 degree Branch (68mm Cast Effect)

    £24.70
    Branch for 68mm Round Cast Effect Downpipe with a 112.5 degree spur. Combine with a 112.5 degree Spigot Bend.

    Anti-Splash Shoe with Lugs (68mm Cast Effect)

    £17.60
    Outlet sits flat to prevent splashing. With ears

    Handed Shoe with Lugs (68mm Cast Effect)

    £16.55
    Directs water from downpipe into gully or grate at 90 degrees. Available in left-handed or right-handed orientation. With fixing lugs.

    Shoe with Lugs (68mm Cast Effect)

    £16.55
    Directs water from 68mm Round Cast Effect Downpipe to a gully, channel, or other surface. With fixing lugs.

    Spacer pack

    £3.60
    5mm spacer for use with Cast Iron Style pipe work (pack contains 10 x 5mm spacers)

    Corner Ogee hopper

    £41.40
    For use with 68mm Round Cast Effect Downpipes only. The Corner Ogee hopper can be installed in an internal 90 degree angled gap. Width (from back centre to outside) 232mm Width of...

    Small Ogee Hopper

    £26.95
    Fluted style rainwater hopper for use with 68mm Round Cast Effect Downpipe only - not suitable for use with 65mm Square Downpipe Overall Width 290mm  Width of opening 255mm Height (Top to bottom) 202mm ...

    Bath hopper

    £37.20
    For use with 65mm Square and 68mm Round Cast Effect Downpipes only. The decorative Bath hopper design boasts an Acorn motif. Overall Width 380mm Width of opening 261mm Height (Top...

    Gothic hopper

    £15.50
    Cast Iron Effect Rainwater Hopper with Gothic style windowed design, for use with 65mm Square and 68mm Round Cast Effect Downpipes only.  Overall Width 370mm  Width of opening 280mm Height (Top to bottom) 370mm ...

    Undated hopper

    £31.20
    Cast Iron Effect Rainwater Hopper, for use with 65mm Square and 68mm Round Cast Effect Downpipes only. Available in two sizes Small: Overall Width 386mm ~ Width of opening 318mm Height (Top to bottom) 226mm...

    Lug Fixing Pack (65 & 68mm Cast Effect)

    £4.80
    For use with Brett Martin Cast Iron Effect downpipe. Contains 10 x 55mm Screws and Wall Plugs. Suitable for fixing 65mm square and 68mm round downpipe. Available in Black only.

    Rainwater Adaptor (110mm)

    £7.95
    Universal rubber adaptor connects rainwater down pipe or waste pipe. Fits into 110mm socket.

    Soil Vent Cowl (110mm Cast Effect)

    £9.50
    Terminal fitting for externally venting 110mm Cast Effect Soil systems.

    Union Bracket - Roundstyle (Cast Iron Effect)

    £8.00
    Bracket for joining two pieces of gutter together.  

    Union Bracket - 170mm Deepstyle (Cast Iron Effect)

    £14.70
    Bracket for joining two pieces of gutter together.

    Running Outlet - Prostyle (Cast Iron Effect)

    £15.50
    Enables water to flow from gutter into downpipe.

    Running Outlet - Deepstyle (Cast Iron Effect)

    £14.30
    Enables water to flow from gutter into downpipe.

    Internal Stop End - Deepstyle (Cast Iron Effect)

    £8.50
    Fits into socket to prevent water from flowing out of gutter. Can be used with a running outlet to create a stop end outlet.

    External Left Handed Stopend - Prostyle (Cast Iron Effect)

    £8.25
    Fits over end of gutter to prevent water running out. Also available in right-handed orientation.

    External Stop End - Deepstyle (Cast Iron Effect)

    £8.75
    Fits over end of gutter to prevent water running out.

    External Stop End - 170mm Deepstyle (Cast Iron Effect)

    £10.40
    Fits over end of gutter to prevent water running out.

    90 degree gutter angle - Roundstyle (Cast Iron Effect)

    £10.70
    Fits over gutter ends to direct water flow around a corner.

    90 degree gutter angle - Deepstyle (Cast Iron Effect)

    £15.55
    Fits over gutter ends to direct water flow around a corner.

    90 degree Gutter Angle - 170mm Deepstyle (Cast Iron Effect)

    £21.45
    Fits over gutter ends to direct water flow around a corner.

    Galvanised Rise & Fall Bracket (Deepstyle)

    £12.10
    A drive in stake for brick or stone work, with adjustable rise and fall bracket to accept 115mm Deepstyle guttering. Plain galvanised finish.

    Galvanised Rise & Fall Bracket (Prostyle)

    £12.10
    A drive in stake for brick or stone work, with adjustable rise and fall bracket to accept 106mm Prostyle guttering. With plain galvanised finish.

    Galvanised Rise & Fall Bracket (Roundstyle)

    £12.10
    A drive in stake for brick or stone work, with adjustable rise and fall bracket to accept 112mm Roundstyle guttering. Plain galvanised finish.  

    Downpipe Clip (105mm Cast Effect)

    £5.70
    Interemediate fixing bracket for Brett Martin 105mm Round Cast Effect Downpipe.

    115mm Offset (105mm Cast Effect)

    £27.15
    Preformed 112½º "swan neck" bend for use with Brett Martin 105mm Cast Effect Round Downpipe. Offset projection is measured from centre to centre.

    135° Spigot Offset Bend (65mm Cast Effect)

    £13.65
    135 degree bend with spigot for creating your own offset with Brett Martin 65mm Square Cast Effect Downpipe.

    112½º Eared Spigot Offset Bend (68mm Cast Effect)

    £15.85
    Offset bend with fixing lug and a spigot tail which fits inside a plain ended piece of 68mm Round Cast Effect Downpipe. Available in left-handed or right-handed orientation.

    112½º Spigot Offset Bend (65mm Cast Effect)

    £13.65
    112½ degree Bend with a Spigot for creating your own offsets for Brett Martin 65mm Square Cast Effect Downpipe.

    Shoe with ears (105mm Cast Effect)

    £28.10
    For directing water flow to drainage connection.

    112½ degree Downpipe Bend (105mm Cast Effect)

    £25.20
    Single socketed bend for use with Brett Martin 105mm Cast Effect Round Downpipe.

    92½º Downpipe Bend (105mm Cast Effect)

    £25.20
    Single socketed bend for use with Brett Martin 105mm Cast Effect Round Downpipe.

    90º Spigot Bend (65mm Cast Effect)

    £13.65
    90 degree bend with spigot for use with Brett Martin 65mm Square Cast Effect Downpipe.

    50mm Plinth Offset with Lugs (68mm Cast Effect)

    £17.60
    Plinth offset ideal for stepping out over brick plinth. With fixing lugs.

    Downpipe Branch (105mm Cast Effect)

    £33.60
    Branch with 112½º spur for use with Brett Martin 105mm Cast Effect Round Downpipe.

    Square Downpipe Branch (65mm Cast Effect)

    £27.75
    112½º branch for use with Brett Martin 65mm Square Cast Effect Downpipe.

    Left Hand Stopend Outlet - Prostyle (Cast Iron Effect)

    £16.15
    Fits over end of Prostyle guttering, preventing water from running out of gutter, and diverting it into downpipe. Also available in right handed orientation.

    Lug Fixing Pack - 105mm/100x75mm/110mm

    £5.85
    For use with Brett Martin Cast Iron Effect downpipe. Contains 10 Screws and Wall Plugs. Suitable for fixing 105mm round and 100 x 75mm rectangular downpipe.

    Coated Rise & Fall Bracket (Roundstyle)

    £12.70
    A drive in stake for brick or stone work with adjustable rise and fall bracket to accept 112mm Roundstyle gutter. Coated Black finish to complement Cast Iron Effect guttering.  

    Right Hand Stopend Outlet - Prostyle (Cast Iron Effect)

    £16.15
    Fits over end of Prostyle guttering, preventing water from running out of gutter, and diverting it into downpipe. Also available in Left handed orientation.

    Side Fix Rafter Bracket (Galvanised)

    £7.90
    Use with a fascia bracket to fix guttering to properties with open eaves. Simply attach this bracket to the top side of the rafter at the eaves, the fascia bracket is attached...

    External Right Handed Stopend - Prostyle (Cast Iron Effect)

    £8.25
    Fits over end of gutter to prevent water running out. Also available in left-handed orientation.

    Coated Rise & Fall Bracket (Deepstyle)

    £13.45
    A drive in stake for brick or stone work, with adjustable rise and fall bracket to accept 115mm Deepstyle guttering. Coated Black finish to complement cast Iron effect guttering.

    Coated Rise & Fall Bracket (Prostyle)

    £13.35
    A drive in stake for brick or stone work, with adjustable rise and fall bracket to accept 106mm Prostyle guttering. Coated Black finish to complement Cast Effect guttering.

    Galvanised Rise & Fall Bracket (170mm Deepstyle)

    £18.60
    A drive in stake for brick or stone work, with adjustable rise and fall bracket to accept 170mm Deepstyle guttering. Plain galvanised finish.

    115mm Offset (68mm Cast Effect)

    £14.45
    112½º "swan neck" bend to return downpipe to your wall. For sizing, measure your soffit depth and then select the next size up.

    Coated Rise & Fall Bracket (Deepstyle High Capacity)

    £19.25
    A drive in stake for brick or stone work, with adjustable rise and fall bracket to accept 170mm Deepstyle High Capacity guttering. With Coated Black finish to complement Cast Effect guttering.

    150mm Offset (68mm Cast Effect)

    £16.60
    112½º "swan neck" bend to return downpipe to your wall. For sizing, measure your soffit depth and then select the next size up.

    230mm Offset (68mm Cast Effect)

    £18.80
    112½º "swan neck" bend to return downpipe to your wall. For sizing, measure your soffit depth and then select the next size up.

    305mm Offset (68mm Cast Effect)

    £21.65
    112½º "swan neck" bend to return downpipe to your wall. For sizing, measure your soffit depth and then select the next size up.

    380mm Offset (68mm Cast Effect)

    £23.05
    112½º "swan neck" bend to return downpipe to your wall. For sizing, measure your soffit depth and then select the next size up.

    455mm Offset (68mm Cast Effect)

    £25.75
    112½º "swan neck" bend to return downpipe to your wall. For sizing, measure your soffit depth and then select the next size up.

    135 degree Branch (68mm Cast Effect)

    £24.70
    Branch for 68mm Round Cast Effect Downpipe with a 135 degree spur. Combine with a 135 degree Bend.

    Downpipe Coupler with Lugs (65mm Cast Effect)

    £9.95
    Jointing collar for use with 65mm Square Cast Effect Downpipe. With fixing lugs.

    75mm Square Offset (65mm Cast Effect)

    £14.20
    112½º "swan neck" bend to return downpipe to your wall. For sizing, measure your soffit depth and then select the next size up.

    115mm Square Offset (65mm Cast Effect)

    £16.50
    112½º "swan neck" bend to return downpipe to your wall. For sizing, measure your soffit depth and then select the next size up.

    150mm Square Offset (65mm Cast Effect)

    £18.70
    112½º "swan neck" bend to return downpipe to your wall. For sizing, measure your soffit depth and then select the next size up.

    Adjustable Square Offset Kit (65mm Cast Effect)

    £31.65
    Adaptable offset for use if standard offsets will not suffice. Maximum 455mm projection.

    Downpipe Coupler Plain (105mm Cast Effect)

    £13.70
    Jointing coupler (without lugs) for use with Brett Martin 105mm Cast Effect Round Downpipe.

    150mm Offset (105mm Cast Effect)

    £27.60
    Preformed 112½º "swan neck" bend for use with Brett Martin 105mm Cast Effect Round Downpipe. 150mm projection is from centre to centre.

    230mm Offset (105mm Cast Effect)

    £28.35
    Preformed 112½º "swan neck" bend for use with Brett Martin 105mm Cast Effect Round Downpipe. 230mm projection is centre to centre.

    305mm Offset (105mm Cast Effect)

    £30.20
    Preformed 112½º "swan neck" bend for use with Brett Martin 105mm Cast Effect Round Downpipe. 305mm projection is from centre to centre.

    380mm Offset (105mm Cast Effect)

    £32.85
    Preformed 112½º "swan neck" bend for use with Brett Martin 105mm Cast Effect Round Downpipe. 380mm projection is from centre to centre.

    455mm Offset (105mm Cast Effect)

    £38.75
    Preformed 112½º "swan neck" bend for use with Brett Martin 105mm Cast Effect Round Downpipe. 455mm projection is from centre to centre.

    100mm x 75mm Cast Effect Rectangular Downpipe

    £58.20
    Socketed with ears. For use with 170mm Deepstyle Cast Effect Guttering.

    Downpipe Clip (100 x 75mm Cast Effect)

    £9.75
    Interemediate fixing bracket for Brett Martin 100mm x 75mm Rectangular Cast Effect Downpipe.

    Gutter Adaptor 100mm x 75mm Cast Effect

    £11.95
    Gutter Adaptor to convert Brett Martin 170mm Cast Effect Running Outlet for use with 100mm x 75mm Rectangular Downpipe.

    Medium Ogee Hopper

    £32.80
    Fluted style rainwater hopper, for use with 65mm Square and 68mm Round Cast Effect Downpipes only. Overall Width 326mm  Width of opening 295mm Height (Top to bottom) 218mm  Depth (Front to back) 201mm

    Downpipe Coupler with Lugs (100 x 75mm Cast Effect)

    £20.60
    Coupler with fixing lugs for Brett Martin 100mm x 75mm Rectangular Cast Effect Downpipe.
    Scroll To Top

    #title#

    #price#
    ×