- No products in the cart.
Circular downpipe with authentic detailing and finish, ideally for domestic new build and renovation projects.
Diameter 68mm Combine with 112mm Roundstyle, 115mm Deepstyle, or 106mm Prostyle (adaptor required) Cast Effect Guttering
Close
Cast Iron Effect Guttering - 68mm Round Downpipe
Socketed with ears. For use with 112mm Roundstyle and 115mm Deepstyle guttering.
Available in lengths of 1.8m and 2.5m.
Downpipe Coupler Plain (68mm Cast Effect)
Jointing collar for 68mm Round Cast Effect Downpipe. Without ears.
Coupler with Lugs (68mm Cast Effect)
Jointing coupler for 68mm Round Cast Effect Downpipe. With fixing lugs.
Downpipe Clip (68mm Cast Effect)
Fixing bracket for use with 68mm Round Cast Effect Downpipe. It is recommended that these are used intermediately to ensure pipe alignment is maintained, especially on uneven brickwork.
75mm Offset (68mm Cast Effect)
112½º "swan neck" bend to return downpipe to your wall. For sizing, measure your soffit depth and then select the next size up.
115mm Offset (68mm Cast Effect)
112½º "swan neck" bend to return downpipe to your wall. For sizing, measure your soffit depth and then select the next size up.
150mm Offset (68mm Cast Effect)
112½º "swan neck" bend to return downpipe to your wall. For sizing, measure your soffit depth and then select the next size up.
230mm Offset (68mm Cast Effect)
112½º "swan neck" bend to return downpipe to your wall. For sizing, measure your soffit depth and then select the next size up.
305mm Offset (68mm Cast Effect)
112½º "swan neck" bend to return downpipe to your wall. For sizing, measure your soffit depth and then select the next size up.
380mm Offset (68mm Cast Effect)
112½º "swan neck" bend to return downpipe to your wall. For sizing, measure your soffit depth and then select the next size up.
455mm Offset (68mm Cast Effect)
112½º "swan neck" bend to return downpipe to your wall. For sizing, measure your soffit depth and then select the next size up.
Adjustable Offset Kit (68mm Cast Effect)
Adaptable offset for use if standard offsets will not suffice. Can be used for projections from 250mm to 650mm.
50mm Plinth Offset with Lugs (68mm Cast Effect)
Plinth offset ideal for stepping out over brick plinth. With fixing lugs.
92½º Bend (68mm Cast Effect)
Right angle bend for use with 68mm Round Cast Effect Downpipe.
135° Bend (68mm Cast Effect)
135 degree bend for use with 68mm Round Cast Effect Downpipe.
112½º Spigot Offset Bend (68mm Cast Effect)
Offset bend with spigot tail which fits inside a plain ended piece of 68mm Round Cast Effect Downpipe.
Close
112½º Eared Spigot Offset Bend (68mm Cast Effect)
Offset bend with fixing lug and a spigot tail which fits inside a plain ended piece of 68mm Round Cast Effect Downpipe. Available in left-handed or right-handed orientation.
112.5 degree Branch (68mm Cast Effect)
Branch for 68mm Round Cast Effect Downpipe with a 112.5 degree spur. Combine with a 112.5 degree Spigot Bend.
135 degree Branch (68mm Cast Effect)
Branch for 68mm Round Cast Effect Downpipe with a 135 degree spur. Combine with a 135 degree Bend.
Shoe with Lugs (68mm Cast Effect)
Directs water from 68mm Round Cast Effect Downpipe to a gully, channel, or other surface. With fixing lugs.
Anti-Splash Shoe with Lugs (68mm Cast Effect)
Outlet sits flat to prevent splashing. With ears
Handed Shoe with Lugs (68mm Cast Effect)
Directs water from downpipe into gully or grate at 90 degrees. Available in left-handed or right-handed orientation. With fixing lugs.