- No products in the cart.
A range of fittings from Plasson for use with 20mm (outside diameter) Medium-density polyethylene (MDPE) water pipe.
Close
20mm Blue MDPE Water Pipe
SC80 (PE80) Polyethylene Light Blue Pipe for the supply of clean water.
12 bar pressure rating (SDR9)
Outside diameter 20mm (15.4mm internal)
Available in Coil sizes: 25m, 50m, 100m, 150m
Pipe Liner (20mm)
Pipe Liner for use with 20mm (OD) MDPE water pipe. Designed to withstand working pressures of up to 16bar.
Coupling (20mm)
For joining 20mm (OD) water pipes. Designed to withstand working pressures of up to 16bar.
End Plug (20mm)
Terminal fitting for 20mm (OD) water pipe. Your water authority may specify one of these to be fitted on a water pipe tail before they will connect. Designed to withstand...
Plastic Stop Tap (20mm)
WRAS approved plastic stop tap for above and below ground use with 20mm (OD) water pipe. Designed to withstand working pressures of up to 16bar.
DZR Brass Stop Tap (20mm)
WRAS approved stop tap for above & below ground use with 20mm (OD) MDPE water pipe. Designed to withstand working pressures of up to 16bar.
90 Degree Tee (20mm)
90 degree junction for 20mm (OD) water pipe. Designed to withstand working pressures of up to 16bar.
90 Degree Elbow (20mm)
90 degree elbow for 20mm (OD) water pipe. Designed to withstand working pressures of up to 16bar.
Male BSP Threaded Adaptor (20mm)
20mm Compression fitting with a 1/2 inch Male BSP threaded connection. Designed to withstand working pressures of up to 16bar.
Female Threaded Adaptor (20mm)
Compression fitting with a ½ inch Female BSP threaded connection. Designed to withstand working pressures of up to 16bar.
½ inch Female Threaded Elbow (20mm)
90 degree fitting for 20mm (OD) water pipe with a ½ inch Female BSP thread. Commonly used to connect 20mm (OD) water pipe to water troughs, float valves or any fitting with a ½ Inch male BSP...
¾ inch Female Threaded Elbow (20mm)
90 degree fitting for 20mm (OD) water pipe with a ¾ inch Female BSP thread. Commonly used to connect 20mm (OD) water pipe to water troughs, float valves or any fitting with a ¾ Inch...
½" Double Check Valve
Kiwa UK Water Reg4 approved double check valve. With ½" female threaded connection. Requires 2no. 20mm Male Thread Adaptor x ½" for connection to 20mm water pipe.
Wall Plate Elbow (20mm)
DZR brass bodied fitting for connection to 20mm MDPE with ½ inch female BSP thread for connection to ½ inch bib tap.
½ Inch Bib Tap
DZR Brass bib tap with double check valve. With ½ inch Male BSP threaded connection and ½ inch hose tail union.
15mm Copper Adaptor (20mm)
Simply insert into fitting to join 20mm (OD) MDPE pipe to 15mm above ground (Table X) or below ground (Table Y) copper pipe.
Blanking plug (20mm)
Plug to be inserted into 20mm Plasson fittings to prevent water flow. Can be removed at a later time for future connection. Designed to withstand working pressures of up to 16bar....
Plasson Wrench (16-40mm)
Wrench for ease of installation of Plasson fittings. Suitable for 16mm, 20mm, 25mm, 32mm and 40mm Plasson mechanical fittings.
Squeeze Off Tool 20-32mm
Squeeze off tool for clamping MDPE pipe shut whilst work is carried out on it. Suitable for use on 20mm, 25mm & 32mm diameter MDPE.