- No products in the cart.
A range of fittings from Plasson for use with 20mm (outside diameter) Medium-density polyethylene (MDPE) water pipe.
Close
Blue MDPE Water Pipe 20mm
£25.00SC80 (PE80) Polyethylene Light Blue Pipe for the supply of clean water.
12 bar pressure rating (SDR9)
Outside diameter 20mm (15.4mm internal)
Available in Coil sizes: 25m, 50m, 100m, 150m
Pipe Liner 20mm
£0.45Pipe Liner for use with 20mm (OD) MDPE water pipe. Designed to withstand working pressures of up to 16bar.
Coupling 20mm
£5.05For joining 20mm (OD) water pipes. Designed to withstand working pressures of up to 16bar.
End Plug 20mm
£6.20Terminal fitting for 20mm (OD) water pipe. Your water authority may specify one of these to be fitted on a water pipe tail before they will connect. Designed to withstand...
Plastic Stop Tap 20mm
£29.90 WRAS approved plastic stop tap for above and below ground use with 20mm (OD) water pipe. Designed to withstand working pressures of up to 16bar.
DZR Brass Stop Tap 20mm
£52.85 WRAS approved stop tap for above & below ground use with 20mm (OD) MDPE water pipe. Designed to withstand working pressures of up to 16bar.
90 Degree Tee 20mm
£8.8590 degree junction for 20mm (OD) water pipe. Designed to withstand working pressures of up to 16bar.
90 Degree Elbow 20mm
£6.2590 degree elbow for 20mm (OD) water pipe. Designed to withstand working pressures of up to 16bar.
Male BSP Threaded Adaptor ½ inch x 20mm
£4.7020mm Compression fitting with a 1/2 inch Male BSP threaded connection. Designed to withstand working pressures of up to 16bar.
Female Threaded Adaptor ½ inch x 20mm
£5.65Compression fitting with a ½ inch Female BSP threaded connection. Designed to withstand working pressures of up to 16bar.
Female Threaded Elbow ½ inch x 20mm
£6.2090 degree fitting for 20mm (OD) water pipe with a ½ inch Female BSP thread. Commonly used to connect 20mm (OD) water pipe to water troughs, float valves or any fitting with a ½ Inch male BSP...
Female Threaded Elbow ¾ inch x 20mm
£6.2090 degree fitting for 20mm (OD) water pipe with a ¾ inch Female BSP thread. Commonly used to connect 20mm (OD) water pipe to water troughs, float valves or any fitting with a ¾ Inch...
Double Check Valve ½" / 20mm
£41.55Kiwa UK Water Reg4 approved double check valve. With ½" female threaded connection. Requires 2no. 20mm Male Thread Adaptor x ½" for connection to 20mm water pipe.
Wall Plate Elbow ½ inch x 20mm
£27.40DZR brass bodied fitting for connection to 20mm MDPE with ½ inch female BSP thread for connection to ½ inch bib tap.
½ Inch Bib Tap
£14.00DZR Brass bib tap with double check valve. With ½ inch Male BSP threaded connection and ½ inch hose tail union.
15mm Copper Pipe Adaptor Set 20mm
£5.00Simply insert into fitting to join 20mm (OD) MDPE pipe to 15mm above ground (Table X) or below ground (Table Y) copper pipe.