- No products in the cart.
A range of mechanical fittings from Plasson for use with 25mm (outside diameter) Medium-density polyethylene (MDPE) water pipe.
Close
25mm Blue MDPE Water Pipe
SC80 (PE80) Polyethylene Light Blue Pipe for the supply of clean water.
12 bar pressure rating (SDR11)
Outside diameter 25mm (20.4mm internal)
Available in Coil sizes: 25m, 50m, 100m, 150m
Pipe Liner (25mm)
For use with 25mm water pipe fittings. Designed to withstand working pressures of up to 16bar.
Coupling (25mm)
For joining water pipes. Available in sizes from 20mm to 63mm.
Designed to withstand working pressures of up to 16bar.
End Plug (25mm)
Terminal fitting for 25mm (OD) water pipe. Your water authority may specify one of these to be fitted on a water pipe tail before they will connect. Designed to withstand...
Plastic Stop Tap (25mm)
WRAS approved plastic stop tap for above and below ground use with 25mm (OD) PE pipework. Designed to withstand working pressures of up to 16bar.
DZR Brass Stop Tap (25mm)
WRAS approved stop tap for above & below ground use with 25mm (OD) pipework. Designed to withstand working pressures of up to 16bar.
90 Degree Tee (25mm)
90 degree junction for 25mm (OD) PE pipes. Designed to withstand working pressures of up to 16bar.
90 Degree Elbow (25mm)
90 degree elbow to suit 25mm (OD) PE pipe. Designed to withstand working pressures of up to 16bar.
Close
Female Threaded Elbow (25mm)
90 degree elbow with a BSP female thread offtake, ideal for connecting to threaded outlets such as those on water troughs, and storage tanks. Available with either a choice of ½"...
Male Threaded Adaptor (25mm)
Compression fitting for 25mm (OD) PE pipe with a 3/4 inch Male BSP threaded connection. Designed to withstand working pressures of up to 16bar.
Female Threaded Adaptor (25mm)
Compression fitting for 25mm (OD) PE pipe with a 3/4 inch Female BSP threaded connection. Designed to withstand working pressures of up to 16bar.
Close
Meter Boundary Box (25mm)
All in one stop tap chamber with 25mm (OD) water pipe connections. 200mm diameter plastic chamber houses a Concentric water meter (1 ½" BSP thread - Domestic use - Nominal flow rate...
¾ Inch Double Check Valve (25mm)
WRAS & UK Water Reg4 approved double check valve. With ¾ Inch female threaded connection. Requires 2no. 25mm Male Thread Adaptor x ¾ Inch for connection to 25mm water pipe.
Wall Plate Elbow (25mm)
DZR brass bodied fitting for connection to 20mm MDPE with ¾ inch female BSP thread for connection to ¾ inch bib tap.
½ Inch Bib Tap with DCV (with ¾ Inch adaptor)
DZR Brass bib tap with double check valve and adaptor for connection to 25mm Wall Plate Elbow. With adaptor to convert ½ inch connection to ¾ inch Male BSP threaded connection and ½...
¾ Inch Bib Tap with DCV
DZR Brass bib tap with double check valve. For connection to 25mm Wall Plate Elbow. With ¾ inch Male BSP threaded connection and ¾ inch hose tail union.