- No products in the cart.
A range of mechanical fittings from Plasson for use with 25mm (outside diameter) Medium-density polyethylene (MDPE) water pipe.
Close
25mm Blue MDPE Water Pipe
SC80 (PE80) Polyethylene Light Blue Pipe for the supply of clean water.
12 bar pressure rating (SDR11)
Outside diameter 25mm (20.4mm internal)
Available in Coil sizes: 25m, 50m, 100m, 150m
Pipe Liner 25mm
For use with 25mm water pipe fittings. Designed to withstand working pressures of up to 16bar.
Coupling 25mm
For joining water pipes. Available in sizes from 20mm to 63mm.
Designed to withstand working pressures of up to 16bar.
End Plug 25mm
Terminal fitting for 25mm (OD) water pipe. Your water authority may specify one of these to be fitted on a water pipe tail before they will connect. Designed to withstand...
Plastic Stop Tap 25mm
WRAS approved plastic stop tap for above and below ground use with 25mm (OD) PE pipework. Designed to withstand working pressures of up to 16bar.
DZR Brass Stop Tap 25mm
WRAS approved stop tap for above & below ground use with 25mm (OD) pipework. Designed to withstand working pressures of up to 16bar.
90 Degree Tee 25mm
90 degree junction for 25mm (OD) PE pipes. Designed to withstand working pressures of up to 16bar.
90 Degree Elbow 25mm
90 degree elbow to suit 25mm (OD) PE pipe. Designed to withstand working pressures of up to 16bar.
Close
Female Threaded Elbow 25mm
90 degree elbow with a BSP female thread offtake, ideal for connecting to threaded outlets such as those on water troughs, and storage tanks. Available with either a choice of ½"...
Male Threaded Adaptor 25mm
Compression fitting for 25mm (OD) PE pipe with a 3/4 inch Male BSP threaded connection. Designed to withstand working pressures of up to 16bar.
Female Threaded Adaptor 25mm
Compression fitting for 25mm (OD) PE pipe with a 3/4 inch Female BSP threaded connection. Designed to withstand working pressures of up to 16bar.
Close
Meter Boundary Box 25mm
All in one stop tap chamber with 25mm (OD) water pipe connections. 200mm diameter plastic chamber houses a Concentric water meter (1 ½" BSP thread - Domestic use - Nominal flow rate...
Double Check Valve ¾ Inch / 25mm
Kiwa UK Water Reg4 approved double check valve. With ¾ Inch female threaded connection. Requires 2no. 25mm Male Thread Adaptor x ¾ Inch for connection to 25mm water pipe.
Wall Plate Elbow ¾ Inch / 25mm
DZR brass bodied fitting for connection to 20mm MDPE with ¾ inch female BSP thread for connection to ¾ inch bib tap.
Bib Tap with DCV ½ Inch with ¾ Inch adaptor
DZR Brass bib tap with double check valve and adaptor for connection to 25mm Wall Plate Elbow. With adaptor to convert ½ inch connection to ¾ inch Male BSP threaded connection and ½...
Bib Tap with DCV ¾ Inch
DZR Brass bib tap with double check valve. For connection to 25mm Wall Plate Elbow. With ¾ inch Male BSP threaded connection and ¾ inch hose tail union.
Plass4 Universal Coupler 15 - 22mm x 25mm
A universal pipe fitting which connects 25mm (OD) metric polyethylene to a pipe with an outside diameter between 15 to 22mm in a wide range of pipe types: including imperial polyethylene...
15mm Copper Pipe Adaptor Set 25mm
Simply insert into fitting to join 25mm (OD) PE pipe to above ground (Table X) or below ground (Table Y) 15mm copper pipe.
Reducing Set
Simply insert into a fitting to reduce pipe size. Designed to withstand working pressures of up to 16bar.
Reducing Collar 25mm to 20mm
For joining 25mm (OD) PE pipe to 20mm (OD) PE pipe. Designed to withstand working pressures of up to 16bar.
Blanking Plug 25mm
Plug to be inserted into 25mm Plasson fittings to prevent water flow. Can be removed at a later time for future connection. Designed to withstand working pressures of up to 16bar. *Please...
Plasson Wrench 16 - 40mm
Wrench for ease of installation of Plasson fittings. Suitable for 16mm, 20mm, 25mm, 32mm and 40mm Plasson mechanical fittings.
Squeeze Off Tool 20-32mm
Squeeze off tool for clamping MDPE pipe shut whilst work is carried out on it. Suitable for use on 20mm, 25mm & 32mm diameter MDPE.
22mm Copper Pipe Adaptor Set 25mm
Simply insert into fitting to join 25mm (OD) PE pipe to above ground (Table X) or below ground (Table Y) 22mm copper pipe.
Plass4 Universal Coupler 20 - 27mm x 25mm
A universal pipe fitting which connects 25mm (OD) metric polyethylene to a pipe with an outside diameter of 20-27mm in a wide range of pipe types: including imperial polyethylene (alkathene),...
Plass4 Universal Coupler 27 - 35mm x 25mm
A universal pipe fitting which connects 25mm (OD) metric polyethylene to a pipe with an outside diameter between 27 to 35mm in a wide range of pipe types: including imperial...