- No products in the cart.
A range of mechanical fittings from Plasson for use with 25mm (outside diameter) Medium-density polyethylene (MDPE) water pipe.
Close
25mm Blue MDPE Water Pipe
£30.00SC80 (PE80) Polyethylene Light Blue Pipe for the supply of clean water.
12 bar pressure rating (SDR11)
Outside diameter 25mm (20.4mm internal)
Available in Coil sizes: 25m, 50m, 100m, 150m
Pipe Liner (25mm)
£0.40For use with 25mm water pipe fittings. Designed to withstand working pressures of up to 16bar.
Coupling (25mm)
£4.50For joining water pipes. Available in sizes from 20mm to 63mm.
Designed to withstand working pressures of up to 16bar.
End Plug (25mm)
£6.60Terminal fitting for 25mm (OD) water pipe. Your water authority may specify one of these to be fitted on a water pipe tail before they will connect. Designed to withstand...
Plastic Stop Tap (25mm)
£34.85 WRAS approved plastic stop tap for above and below ground use with 25mm (OD) PE pipework. Designed to withstand working pressures of up to 16bar.
DZR Brass Stop Tap (25mm)
£58.50 WRAS approved stop tap for above & below ground use with 25mm (OD) pipework. Designed to withstand working pressures of up to 16bar.
90 Degree Tee (25mm)
£11.4590 degree junction for 25mm (OD) PE pipes. Designed to withstand working pressures of up to 16bar.
90 Degree Elbow (25mm)
£7.6090 degree elbow to suit 25mm (OD) PE pipe. Designed to withstand working pressures of up to 16bar.
Close
Female Threaded Elbow (25mm)
£6.75 90 degree elbow with a BSP female thread offtake, ideal for connecting to threaded outlets such as those on water troughs, and storage tanks. Available with either a choice of ½"...
Male Threaded Adaptor (25mm)
£4.70Compression fitting for 25mm (OD) PE pipe with a 3/4 inch Male BSP threaded connection. Designed to withstand working pressures of up to 16bar.
Female Threaded Adaptor (25mm)
£5.15Compression fitting for 25mm (OD) PE pipe with a 3/4 inch Female BSP threaded connection. Designed to withstand working pressures of up to 16bar.
Close
Meter Boundary Box (25mm)
£218.00All in one stop tap chamber with 25mm (OD) water pipe connections. 200mm diameter plastic chamber houses a Concentric water meter (1 ½" BSP thread - Domestic use - Nominal flow rate...
¾ Inch Double Check Valve (25mm)
£49.35Kiwa UK Water Reg4 approved double check valve. With ¾ Inch female threaded connection. Requires 2no. 25mm Male Thread Adaptor x ¾ Inch for connection to 25mm water pipe.
Wall Plate Elbow (25mm)
£28.40DZR brass bodied fitting for connection to 20mm MDPE with ¾ inch female BSP thread for connection to ¾ inch bib tap.
½ Inch Bib Tap with DCV (with ¾ Inch adaptor)
£15.95DZR Brass bib tap with double check valve and adaptor for connection to 25mm Wall Plate Elbow. With adaptor to convert ½ inch connection to ¾ inch Male BSP threaded connection and ½...
¾ Inch Bib Tap with DCV
£35.05DZR Brass bib tap with double check valve. For connection to 25mm Wall Plate Elbow. With ¾ inch Male BSP threaded connection and ¾ inch hose tail union.