- No products in the cart.
A range of mechanical fittings from Plasson for use with 50mm (outside diameter) Medium-density polyethylene (MDPE) water pipe.
Close
50mm Blue MDPE Water Pipe
£110.00SC80 (PE80) Polyethylene Light Blue Pipe for the supply of clean water.
12 bar pressure rating (SDR11)
Outside diameter 50mm (40mm internal)
Available in Coil sizes: 25m, 50m, 100m
Pipe Liner (50mm)
£1.15For use with 50mm water pipe fittings. Designed to withstand working pressures of up to 16bar.
Coupling (50mm)
£23.15For joining 50mm (OD) water pipes.
Designed to withstand working pressures of up to 16bar.
End Plug (50mm)
£19.90Terminal fitting for 50mm (OD) water pipe. Your water authority may specify one of these to be fitted on a water pipe tail before they will connect. Designed to withstand...
Mains Stop Valve (50mm)
£66.35The first WRAS approved high performance non metallic mains stop valve. With 1 1/2" BSP female threads, requires 2 x BSP Male Thread Adaptor 50mm x 1 1/2" for connction...
90 Degree Tee (50mm)
£33.0590 degree junction for 50mm (OD) PE pipes. Designed to withstand working pressures of up to 16bar.
90 Degree Elbow (50mm)
£26.5090 degree elbow to suit 50mm (OD) PE pipe. Designed to withstand working pressures of up to 16bar.
Male Threaded Adaptor (50mm)
£17.70Compression fitting for 50mm (OD) PE pipe with a 1½ inch Male BSP threaded connection. Designed to withstand working pressures of up to 16bar.
Female Threaded Adaptor (50mm)
£21.75Compression fitting for 50mm (OD) PE pipe with a 1½ inch Female BSP threaded connection. Designed to withstand working pressures of up to 16bar.
1½ Inch Double Check Valve (50mm)
£212.15Kiwa UK Water Reg4 approved double check valve. With 1½ inch female threaded connection. Requires 2no. 50mm Male Thread Adaptor x 1½ inch for connection to 50mm water pipe.
Plass4 Universal Coupler (50mm)
£46.65A universal pipe fitting to connect 50mm (OD) metric polyethylene to a wide range of pipe types with an outside diameter between 35 and 50mm. Ideal for conncting to imperial...
Close
Reducing Set (50mm)
£8.70Conversion kit for use with 50mm Plasson compression fittings to enable connection to either 32mm (OD) or 25mm (OD) size pipe. Designed to withstand working pressures of up to 16bar.
Blanking Plug (50mm)
£4.75Plug to be inserted into 50mm Plasson fittings to prevent water flow. Can be removed at a later time for future connection. Designed to withstand working pressures of up to 16bar.
Plasson Wrench (40-75mm)
£44.50Wrench for ease of installation of Plasson fittings. Suitable for 40mm, 50mm, 63mm and 75mm Plasson mechanical fittings.
Squeeze Off Tool 32-63mm
£101.50Squeeze off tool for clamping MDPE pipe shut whilst work is carried out on it. Suitable for use on 32mm, 50mm & 63mm diameter MDPE.