- No products in the cart.
Blanking Plug (63mm)
Plug to be inserted into 63mm Plasson fittings to prevent water flow. Can be removed at a later time for future connection. Designed to withstand working pressures of up to 16bar.
Pipe Liner (32mm)
For use with 32mm water pipe fittings. Designed to withstand working pressures of up to 16bar.
Blanking Plug (50mm)
Plug to be inserted into 50mm Plasson fittings to prevent water flow. Can be removed at a later time for future connection. Designed to withstand working pressures of up to 16bar.
Pipe Liner (25mm)
For use with 25mm water pipe fittings. Designed to withstand working pressures of up to 16bar.
90 Degree Tee (25mm)
90 degree junction for 25mm (OD) PE pipes. Designed to withstand working pressures of up to 16bar.
Blanking Plug (25mm)
Plug to be inserted into 25mm Plasson fittings to prevent water flow. Can be removed at a later time for future connection. Designed to withstand working pressures of up to 16bar. *Please...
Coupling (32mm)
For joining 32mm (OD) water pipes.
Designed to withstand working pressures of up to 16bar.
Plastic Stop Tap (25mm)
WRAS approved plastic stop tap for above and below ground use with 25mm (OD) PE pipework. Designed to withstand working pressures of up to 16bar.
DZR Brass Stop Tap (32mm)
WRAS approved stop tap for above & below ground use with 32mm (OD) PE pipework. Designed to withstand working pressures of up to 16bar.
Plasson Wrench (40-75mm)
Wrench for ease of installation of Plasson fittings. Suitable for 40mm, 50mm, 63mm and 75mm Plasson mechanical fittings.
Pipe Liner (50mm)
For use with 50mm water pipe fittings. Designed to withstand working pressures of up to 16bar.
Plastic Stop Tap (32mm)
WRAS approved plastic stop tap for above and below ground use with 32mm (OD) PE pipework. Designed to withstand working pressures of up to 16bar.
1 Inch Double Check Valve (32mm)
Kiwa UK Water Reg4 approved double check valve. With 1 Inch female threaded connection. Requires 2no. 32mm Male Thread Adaptor x 1 Inch for connection to 32mm water pipe.
90 Degree Tee (32mm)
90 degree junction for 32mm (OD) PE pipes. Designed to withstand working pressures of up to 16bar.
End Plug (32mm)
Terminal fitting for 25mm (OD) water pipe. Water authority may specify one of these to be fitted on a water pipe tail before they connect.
Male Threaded Adaptor (50mm)
Compression fitting for 50mm (OD) PE pipe with a 1½ inch Male BSP threaded connection. Designed to withstand working pressures of up to 16bar.
Male Threaded Adaptor (32mm)
Compression fitting for 32mm (OD) PE pipe with a 1 inch Male BSP threaded connection. Designed to withstand working pressures of up to 16bar.
Squeeze Off Tool 32-63mm
Squeeze off tool for clamping MDPE pipe shut whilst work is carried out on it. Suitable for use on 32mm, 50mm & 63mm diameter MDPE.
Close
Copper Pipe Adaptor Set (25mm)
Simply insert into fitting to join 25mm (OD) PE pipe to above ground (Table X) or below ground (Table Y) copper pipe.
Available to join 25mm (OD) PE to either 15mm or 22mm Copper
End Plug (25mm)
Terminal fitting for 25mm (OD) water pipe. Your water authority may specify one of these to be fitted on a water pipe tail before they will connect. Designed to withstand...
Close
Reducing Collar (32mm)
For joining 32mm (OD) PE pipe to either 25mm (OD) or 20mm (OD) PE pipe. Designed to withstand working pressures of up to 16bar.
Pipe Liner (63mm)
For use with 63mm water pipe fittings. Designed to withstand working pressures of up to 16bar.