- No products in the cart.
Blanking Plug (63mm)
Plug to be inserted into 63mm Plasson fittings to prevent water flow. Can be removed at a later time for future connection. Designed to withstand working pressures of up to 16bar.
Pipe Liner (32mm)
For use with 32mm water pipe fittings. Designed to withstand working pressures of up to 16bar.
Blanking Plug (50mm)
Plug to be inserted into 50mm Plasson fittings to prevent water flow. Can be removed at a later time for future connection. Designed to withstand working pressures of up to 16bar.
Pipe Liner (25mm)
For use with 25mm water pipe fittings. Designed to withstand working pressures of up to 16bar.
90 Degree Tee (25mm)
90 degree junction for 25mm (OD) PE pipes. Designed to withstand working pressures of up to 16bar.
Blanking Plug (25mm)
Plug to be inserted into 25mm Plasson fittings to prevent water flow. Can be removed at a later time for future connection. Designed to withstand working pressures of up to 16bar. *Please...
Coupling (32mm)
For joining 32mm (OD) water pipes.
Designed to withstand working pressures of up to 16bar.
Plastic Stop Tap (25mm)
WRAS approved plastic stop tap for above and below ground use with 25mm (OD) PE pipework. Designed to withstand working pressures of up to 16bar.
DZR Brass Stop Tap (32mm)
WRAS approved stop tap for above & below ground use with 32mm (OD) PE pipework. Designed to withstand working pressures of up to 16bar.
Plasson Wrench (40-75mm)
Wrench for ease of installation of Plasson fittings. Suitable for 40mm, 50mm, 63mm and 75mm Plasson mechanical fittings.
Pipe Liner (50mm)
For use with 50mm water pipe fittings. Designed to withstand working pressures of up to 16bar.
Plastic Stop Tap (32mm)
WRAS approved plastic stop tap for above and below ground use with 32mm (OD) PE pipework. Designed to withstand working pressures of up to 16bar.
1 Inch Double Check Valve (32mm)
Kiwa UK Water Reg4 approved double check valve. With 1 Inch female threaded connection. Requires 2no. 32mm Male Thread Adaptor x 1 Inch for connection to 32mm water pipe.
90 Degree Tee (32mm)
90 degree junction for 32mm (OD) PE pipes. Designed to withstand working pressures of up to 16bar.
End Plug (32mm)
Terminal fitting for 25mm (OD) water pipe. Water authority may specify one of these to be fitted on a water pipe tail before they connect.
Male Threaded Adaptor (50mm)
Compression fitting for 50mm (OD) PE pipe with a 1½ inch Male BSP threaded connection. Designed to withstand working pressures of up to 16bar.
Male Threaded Adaptor (32mm)
Compression fitting for 32mm (OD) PE pipe with a 1 inch Male BSP threaded connection. Designed to withstand working pressures of up to 16bar.
Squeeze Off Tool 32-63mm
Squeeze off tool for clamping MDPE pipe shut whilst work is carried out on it. Suitable for use on 32mm, 50mm & 63mm diameter MDPE.
Close
Copper Pipe Adaptor Set (25mm)
Simply insert into fitting to join 25mm (OD) PE pipe to above ground (Table X) or below ground (Table Y) copper pipe.
Available to join 25mm (OD) PE to either 15mm or 22mm Copper
End Plug (25mm)
Terminal fitting for 25mm (OD) water pipe. Your water authority may specify one of these to be fitted on a water pipe tail before they will connect. Designed to withstand...
Close
Reducing Collar (32mm)
For joining 32mm (OD) PE pipe to either 25mm (OD) or 20mm (OD) PE pipe. Designed to withstand working pressures of up to 16bar.
Pipe Liner (63mm)
For use with 63mm water pipe fittings. Designed to withstand working pressures of up to 16bar.
DZR Brass Stop Tap (25mm)
WRAS approved stop tap for above & below ground use with 25mm (OD) pipework. Designed to withstand working pressures of up to 16bar.
Male Threaded Adaptor (25mm)
Compression fitting for 25mm (OD) PE pipe with a 3/4 inch Male BSP threaded connection. Designed to withstand working pressures of up to 16bar.
BSP Male Threaded Adaptor (63mm)
Compression fitting for 63mm (OD) PE pipe with a Male BSP threaded connection. Designed to withstand working pressures of up to 16bar.
Close
Plass4 Universal Coupler (32mm)
A universal pipe fitting to connect 32mm (OD) metric polyethylene to a wide range of pipe types: including imperial polyethylene (alkathene), copper (table X & Y), lead, galvanised steel, PVCu...
Close
Female Threaded Adaptor (32mm)
Compression fitting for 32mm (OD) PE pipe with a Female BSP threaded connection. Designed to withstand working pressures of up to 16bar. Available in 2 different BSP thread sizes: 3/4 inch or...
1½ Inch Double Check Valve (50mm)
Kiwa UK Water Reg4 approved double check valve. With 1½ inch female threaded connection. Requires 2no. 50mm Male Thread Adaptor x 1½ inch for connection to 50mm water pipe.
2 Inch Double Check Valve (63mm)
Kiwa UK Water Reg4 approved double check valve. With 2 inch female threaded connection. Requires 2no. 63mm Male Thread Adaptor x 2 inch for connection to 63mm water pipe.
¾ Inch Double Check Valve (25mm)
Kiwa UK Water Reg4 approved double check valve. With ¾ Inch female threaded connection. Requires 2no. 25mm Male Thread Adaptor x ¾ Inch for connection to 25mm water pipe.
Wall Plate Elbow (25mm)
DZR brass bodied fitting for connection to 20mm MDPE with ¾ inch female BSP thread for connection to ¾ inch bib tap.
Squeeze Off Tool 20-32mm
Squeeze off tool for clamping MDPE pipe shut whilst work is carried out on it. Suitable for use on 20mm, 25mm & 32mm diameter MDPE.
¾ Inch Bib Tap with DCV
DZR Brass bib tap with double check valve. For connection to 25mm Wall Plate Elbow. With ¾ inch Male BSP threaded connection and ¾ inch hose tail union.
90 Degree Tee (63mm)
90 degree junction for 63mm (OD) PE pipes. Designed to withstand working pressures of up to 16bar.
Blanking Plug (32mm)
Plug to be inserted into 32mm Plasson fittings to prevent water flow. Can be removed at a later time for future connection. Designed to withstand working pressures of up to 16bar.
90 Degree Tee (50mm)
90 degree junction for 50mm (OD) PE pipes. Designed to withstand working pressures of up to 16bar.
28mm Copper Pipe Adaptor Set (32mm)
Simply insert into fitting to join PE pipe to above ground (Table X) or below ground (Table Y) copper pipe.
Available to join 32mm (OD) PE to 28mm Copper
Coupling (50mm)
For joining 50mm (OD) water pipes.
Designed to withstand working pressures of up to 16bar.
Coupling (63mm)
For joining 63mm (OD) water pipes.
Designed to withstand working pressures of up to 16bar.
Coupling (25mm)
For joining water pipes. Available in sizes from 20mm to 63mm.
Designed to withstand working pressures of up to 16bar.
End Plug (50mm)
Terminal fitting for 50mm (OD) water pipe. Your water authority may specify one of these to be fitted on a water pipe tail before they will connect. Designed to withstand...
End Plug (63mm)
Terminal fitting for 63mm (OD) water pipe. Your water authority may specify one of these to be fitted on a water pipe tail before they will connect. Designed to withstand...
Close
Reducing Set (63mm)
Conversion kit for use with 63mm Plasson compression fittings to enable connection to either 50mm (OD), 32mm (OD) or 25mm (OD) size pipe. Designed to withstand working pressures of up to 16bar.
Plass4 Universal Coupler (50mm)
A universal pipe fitting to connect 50mm (OD) metric polyethylene to a wide range of pipe types with an outside diameter between 35 and 50mm. Ideal for conncting to imperial...
BSP Female Threaded Adaptor (63mm)
Compression fitting for 50mm (OD) PE pipe with a Female BSP threaded connection. Designed to withstand working pressures of up to 16bar.
Female Threaded Adaptor (50mm)
Compression fitting for 50mm (OD) PE pipe with a 1½ inch Female BSP threaded connection. Designed to withstand working pressures of up to 16bar.
Female Threaded Adaptor (25mm)
Compression fitting for 25mm (OD) PE pipe with a 3/4 inch Female BSP threaded connection. Designed to withstand working pressures of up to 16bar.
½" Double Check Valve
Kiwa UK Water Reg4 approved double check valve. With ½" female threaded connection. Requires 2no. 20mm Male Thread Adaptor x ½" for connection to 20mm water pipe.
½ Inch Bib Tap with DCV (with ¾ Inch adaptor)
DZR Brass bib tap with double check valve and adaptor for connection to 25mm Wall Plate Elbow. With adaptor to convert ½ inch connection to ¾ inch Male BSP threaded connection and ½...