Products

WRAS & UK Water Reg4 approved double check valve. With 1 Inch female threaded connection. Requires 2no. 32mm Male Thread Adaptor x 1 Inch for connection to 32mm water pipe.

Harlequin 1000 Litre integrally bunded oil tank, moulded from durable medium density polyethylene, with inner tank vent and moulded-in handles for ease of lifting.Tank features bottom outlet (1” BSP female thread),...

Straight connector for 100mm single walled land drainage pipe

A single walled corrugated pipe, manufactured from high density polyethylene. Widely used as a carrier pipe for surface water drainage. Available in 50m coils.

Socketed with ears. For use with 170mm Deepstyle Cast Effect Guttering.

Socketed with ears. For use with 170mm Deepstyle Cast Effect Guttering.

Single socketed bend for 160mm undergorund pipe

Harlequin 1100 Litre integrally bunded oil tank, moulded from durable medium density polyethylene, with inner tank vent and moulded-in handles for ease of lifting.Tank features bottom outlet (1” BSP female thread),...

A UV stable pipe with a pushfit ring seal suitable for use as either a downpipe (particularly with Brett Martin 170mm Deepstyle High Capacity Guttering) or in a soil stack system....

Incorporating traditional cast iron detailing with all the benefits of a plastic system, Cast Effect Soil pipe complements any Cast Effect Rainwater System. With a realistic cast iron finish, this system provides...

 Double socketed.

*Available for Local Delivery and Collection only* A half perforated pipe suitable for use in domestic soakaway systems or for surface water drainage. Socketed at one end for easy jointing....

For use where a soil vent pipe penetrates the roof covering, this fitting diverts rainwater away.

Flexible rubber adaptor coupling for connecting pipes with an different outside diameter, in non-pressure systems. This coupler will join a pipe with an outside diameter of 110-121mm to a pipe...

Flexible rubber adaptor coupling for connecting pipes with an different outside diameter, in non-pressure systems. This coupler will join a pipe with an outside diameter of 110-122mm to a pipe...

Flexible rubber coupling, ideal as a repair joint, for connecting pipes with an outside diameter between 100 to 115mm in non-pressure systems. Drain Couplings comprise a moulded EPDM sleeve which is attached...

Branch for 68mm Round Cast Effect Downpipe with a 112.5 degree spur. Combine with a 112.5 degree Spigot Bend.

112.5 degree bend 110mm Cast Iron Effect Soil System Pipe. Available as Single Socket only.

Single ring seal pushfit socket bend for use in 110mm PVC Rainwater and Soil stack assemblies.

112.5 degree bend for use as bottom half of downpipe offset. With single solvent weld socket and one plain end.

112.5 degree bend with one ring-seal push-fit socket and one solvent weld socket. For use as part of an offset in a 110mm Rainwater System.

Roundstyle is a traditional 112mm half round system suitable for the domestic housing market.  The Roundstyle system utilises 68mm round downpipe and fittings.  Width 112mm Depth 51mm Length 4m Colour Black

Single socketed bend for use with Brett Martin 105mm Cast Effect Round Downpipe.

Use two of these 112½º bends to return down pipe to your wall. Use a cut length of down pipe in between, depending on your soffit depth.

112½ degree Bend with a Spigot for creating your own offsets for Brett Martin 65mm Square Cast Effect Downpipe.

Offset bend with spigot tail which fits inside a plain ended piece of 68mm Round Cast Effect Downpipe.

A semi elliptical gutter that offers more effective rainwater drainage on larger roof areas. Offers an increase of 50% in flow capacity compared to the 112mm Roundstyle, potentially reducing the number of downpipe...

Combining period Cast Iron detailing and styling, Deepstyle is a higher capacity semi elliptical rainwater system, providing greater drainage efficiency on larger roof areas. Width 115mm Depth 75mm Available in 4...

Preformed 112½º "swan neck" bend for use with Brett Martin 105mm Cast Effect Round Downpipe. Offset projection is measured from centre to centre.

112½º "swan neck" bend to return downpipe to your wall. For sizing, measure your soffit depth and then select the next size up.

112½º "swan neck" bend to return downpipe to your wall. For sizing, measure your soffit depth and then select the next size up.

The DT10 (53L/12 Gal) water trough is manufactured from tough, impact resistant and UV protected polyethylene which is designed with smooth edges for animal safety. The single reservoir and low profile...

Harlequin 1200 Litre integrally bunded oil tank, moulded from durable medium density polyethylene, with inner tank vent and moulded-in handles for ease of lifting.Tank features bottom outlet (1” BSP female thread),...

Harlequin 1225 Litre integrally bunded Slimline oil tank, ideal for use when space is at a premium and additional tank technology is not a requirement. Made from Medium Density Polyethylene...