Products

Kiwa UK Water Reg4 approved double check valve. With 1 Inch female threaded connection. Requires 2no. 32mm Male Thread Adaptor x 1 Inch for connection to 32mm water pipe.

Harlequin 1000 Litre integrally bunded oil tank, moulded from durable medium density polyethylene, with inner tank vent and moulded-in handles for ease of lifting.Tank features bottom outlet (1” BSP female thread),...

Straight connector for 100mm single walled land drainage pipe

A perforated, single walled corrugated pipe, manufactured from high density polyethylene used for ducting gas pipe. Outside Diameter 100mm Coil Length 50m Please note that this duct does not include drawstring.

A single walled corrugated pipe, manufactured from high density polyethylene. Widely used as a carrier pipe for surface water drainage. Available in 50m coils.

Single socketed bend for 160mm undergorund pipe

Harlequin 1100 Litre integrally bunded oil tank, moulded from durable medium density polyethylene, with inner tank vent and moulded-in handles for ease of lifting.Tank features bottom outlet (1” BSP female thread),...

A UV stable pipe with a pushfit ring seal suitable for use as either a downpipe (particularly with Brett Martin 170mm Deepstyle High Capacity Guttering) or in a soil stack system....

Transition fitting to join 110mm and 160mm pipe. With a 160mm pipe spigot and a 110mm socket.

Triple Socketed Reducing branch with a 45 degree spur, which allows connection of 110mm pipework into a 160mm system. 

Triple Socketed reducing branch with an 87½ degree spur for connection of 110mm pipework into a 160mm system.

Flexible rubber adaptor coupling for connecting pipes with an different outside diameter, in non-pressure systems. This coupler will join a pipe with an outside diameter of 110-121mm to a pipe...

Flexible rubber adaptor coupling for connecting pipes with an different outside diameter, in non-pressure systems. This coupler will join a pipe with an outside diameter of 110-122mm to a pipe...

Flexible rubber coupling, ideal as a repair joint, for connecting pipes with an outside diameter between 100 to 115mm in non-pressure systems. Drain Couplings comprise a moulded EPDM sleeve which is attached...

Single ring seal pushfit socket bend for use in 110mm PVC Rainwater and Soil stack assemblies.

112.5 degree bend for use as bottom half of downpipe offset. With single solvent weld socket and one plain end.

112.5 degree bend with one ring-seal push-fit socket and one solvent weld socket. For use as part of an offset in a 110mm Rainwater System.

Roundstyle is a traditional 112mm half round system suitable for the domestic housing market.  The Roundstyle system utilises 68mm round downpipe and fittings.  Width 112mm Depth 51mm Length 4m Colour Black

Use two of these 112½º bends to return down pipe to your wall. Use a cut length of down pipe in between, depending on your soffit depth.

A semi elliptical gutter that offers more effective rainwater drainage on larger roof areas. Offers an increase of 50% in flow capacity compared to the 112mm Roundstyle, potentially reducing the number of downpipe...

The DT10 (53L/12 Gal) water trough is manufactured from tough, impact resistant and UV protected polyethylene which is designed with smooth edges for animal safety. The single reservoir and low profile...

Harlequin 1200 Litre integrally bunded oil tank, moulded from durable medium density polyethylene, with inner tank vent and moulded-in handles for ease of lifting.Tank features bottom outlet (1” BSP female thread),...

Harlequin 1225 Litre integrally bunded Slimline oil tank, ideal for use when space is at a premium and additional tank technology is not a requirement. Made from Medium Density Polyethylene...

Harlequin 1300 Litre integrally bunded oil tank, moulded from durable medium density polyethylene, with inner tank vent and moulded-in handles for ease of lifting.Tank features bottom outlet (1” BSP female thread),...

Angled corner fitting for 115mm Black Deepstyle PVC gutter. Double socketed with integral flexible clips that allow quick and easy snap together assembly on to the gutter length.

Angled corner fitting for 112mm Black Roundstyle PVC gutter.

Harlequin 1400 Litre integrally bunded oil tank, moulded from durable medium density polyethylene, with inner tank vent and moulded-in handles for ease of lifting.Tank features bottom outlet (1” BSP female thread),...

Simply insert into fitting to join 20mm (OD) MDPE pipe to 15mm above ground (Table X)  or below ground (Table Y) copper pipe.

Double socket bend for 150mm (internal)/178mm (external) twin wall pipe. For a watertight seal optional sealing rings are available (2 required per bend).

Double socket bend for 225mm (internal)/268mm (external) twin wall pipe. For a watertight seal optional sealing rings are available (2 required per bend)

Double socket bend for 300mm (internal)/353mm (external) twin wall pipe. For a watertight seal optional sealing rings are available (2 required per bend).

Straight connector for 160mm single walled land drainage pipe

Cut out at one end to connect from 60 - 160mm land drainage pipe to 160mm land drainage pipe.

Single walled corrugated pipe, manufactured from high density polyethylene. Widely used for the collection & removal of surface water. Pipe is fully perforated and has 3 perforations per corrugation. Available...

Single walled corrugated pipe, manufactured from high density polyethylene. Widely used as a carrier pipe for surface water drainage. Available in 50m coils.

Flexible rubber adaptor coupling for connecting pipes with an different outside diameter, in non-pressure systems. This coupler will join a pipe with an outside diameter of 160-180mm to a pipe...

Flexible rubber coupling, ideal as a repair joint, for connecting pipes with an outside diameter between 150 to 165mm in non-pressure systems. Drain Couplings comprise a moulded EPDM sleeve which is attached...

90 degree corner fitting for Brett Martin 170mm Black PVC Deepstyle guttering.