- No products in the cart.
Blanking Plug (63mm)
£5.55Plug to be inserted into 63mm Plasson fittings to prevent water flow. Can be removed at a later time for future connection. Designed to withstand working pressures of up to 16bar.
Pipe Liner (32mm)
£0.65For use with 32mm water pipe fittings. Designed to withstand working pressures of up to 16bar.
Blanking Plug (50mm)
£5.10Plug to be inserted into 50mm Plasson fittings to prevent water flow. Can be removed at a later time for future connection. Designed to withstand working pressures of up to 16bar.
Pipe Liner (25mm)
£0.40For use with 25mm water pipe fittings. Designed to withstand working pressures of up to 16bar.
90 Degree Tee (25mm)
£12.3590 degree junction for 25mm (OD) PE pipes. Designed to withstand working pressures of up to 16bar.
Blanking Plug (25mm)
£2.45Plug to be inserted into 25mm Plasson fittings to prevent water flow. Can be removed at a later time for future connection. Designed to withstand working pressures of up to 16bar. *Please...
Coupling (32mm)
£11.30For joining 32mm (OD) water pipes.
Designed to withstand working pressures of up to 16bar.
Plastic Stop Tap (25mm)
£37.60 WRAS approved plastic stop tap for above and below ground use with 25mm (OD) PE pipework. Designed to withstand working pressures of up to 16bar.
DZR Brass Stop Tap (32mm)
£133.05WRAS approved stop tap for above & below ground use with 32mm (OD) PE pipework. Designed to withstand working pressures of up to 16bar.
Plasson Wrench (40-75mm)
£48.05Wrench for ease of installation of Plasson fittings. Suitable for 40mm, 50mm, 63mm and 75mm Plasson mechanical fittings.
Pipe Liner (50mm)
£1.25For use with 50mm water pipe fittings. Designed to withstand working pressures of up to 16bar.
Plastic Stop Tap (32mm)
£58.25WRAS approved plastic stop tap for above and below ground use with 32mm (OD) PE pipework. Designed to withstand working pressures of up to 16bar.
1 Inch Double Check Valve (32mm)
£93.70Kiwa UK Water Reg4 approved double check valve. With 1 Inch female threaded connection. Requires 2no. 32mm Male Thread Adaptor x 1 Inch for connection to 32mm water pipe.
90 Degree Tee (32mm)
£16.6090 degree junction for 32mm (OD) PE pipes. Designed to withstand working pressures of up to 16bar.
End Plug (32mm)
£10.35Terminal fitting for 25mm (OD) water pipe. Water authority may specify one of these to be fitted on a water pipe tail before they connect.
Male Threaded Adaptor (50mm)
£19.10Compression fitting for 50mm (OD) PE pipe with a 1½ inch Male BSP threaded connection. Designed to withstand working pressures of up to 16bar.