- No products in the cart.
Male Threaded Adaptor (32mm)
£7.80Compression fitting for 32mm (OD) PE pipe with a 1 inch Male BSP threaded connection. Designed to withstand working pressures of up to 16bar.
Squeeze Off Tool 32-63mm
£109.65Squeeze off tool for clamping MDPE pipe shut whilst work is carried out on it. Suitable for use on 32mm, 50mm & 63mm diameter MDPE.
Close
Copper Pipe Adaptor Set (25mm)
£5.45Simply insert into fitting to join 25mm (OD) PE pipe to above ground (Table X) or below ground (Table Y) copper pipe.
Available to join 25mm (OD) PE to either 15mm or 22mm Copper
End Plug (25mm)
£7.10Terminal fitting for 25mm (OD) water pipe. Your water authority may specify one of these to be fitted on a water pipe tail before they will connect. Designed to withstand...
Close
Reducing Collar (32mm)
£15.30For joining 32mm (OD) PE pipe to either 25mm (OD) or 20mm (OD) PE pipe. Designed to withstand working pressures of up to 16bar.
Pipe Liner (63mm)
£1.50For use with 63mm water pipe fittings. Designed to withstand working pressures of up to 16bar.
DZR Brass Stop Tap (25mm)
£63.55 WRAS approved stop tap for above & below ground use with 25mm (OD) pipework. Designed to withstand working pressures of up to 16bar.
Male Threaded Adaptor (25mm)
£5.05Compression fitting for 25mm (OD) PE pipe with a 3/4 inch Male BSP threaded connection. Designed to withstand working pressures of up to 16bar.
BSP Male Threaded Adaptor (63mm)
£25.55Compression fitting for 63mm (OD) PE pipe with a Male BSP threaded connection. Designed to withstand working pressures of up to 16bar.
Close
Plass4 Universal Coupler (32mm)
£23.30A universal pipe fitting to connect 32mm (OD) metric polyethylene to a wide range of pipe types: including imperial polyethylene (alkathene), copper (table X & Y), lead, galvanised steel, PVCu...
Close
Female Threaded Adaptor (32mm)
£7.45Compression fitting for 32mm (OD) PE pipe with a Female BSP threaded connection. Designed to withstand working pressures of up to 16bar. Available in 2 different BSP thread sizes: 3/4 inch or...
1½ Inch Double Check Valve (50mm)
£229.20Kiwa UK Water Reg4 approved double check valve. With 1½ inch female threaded connection. Requires 2no. 50mm Male Thread Adaptor x 1½ inch for connection to 50mm water pipe.
2 Inch Double Check Valve (63mm)
£296.80Kiwa UK Water Reg4 approved double check valve. With 2 inch female threaded connection. Requires 2no. 63mm Male Thread Adaptor x 2 inch for connection to 63mm water pipe.
¾ Inch Double Check Valve (25mm)
£53.30Kiwa UK Water Reg4 approved double check valve. With ¾ Inch female threaded connection. Requires 2no. 25mm Male Thread Adaptor x ¾ Inch for connection to 25mm water pipe.
Wall Plate Elbow (25mm)
£30.70DZR brass bodied fitting for connection to 20mm MDPE with ¾ inch female BSP thread for connection to ¾ inch bib tap.
Squeeze Off Tool 20-32mm
£65.30Squeeze off tool for clamping MDPE pipe shut whilst work is carried out on it. Suitable for use on 20mm, 25mm & 32mm diameter MDPE.