Start typing to see products you are looking for.
  • Menu

Shopping cart

Close
Menu
Start typing to see products you are looking for.
  • Bidford-on-Avon, B50 4JH
  • 01789 491200
  • Mon - Fri 7.30am - 5pm
50mm (outside diameter) Medium-density polyethylene (MDPE) water pipe is used in the supply of clean waster to domestic and commercial properties. Rated at 12 bar pressure, MDPE water pipe is available in blue (for clean water) or black (for above ground use or for dirty water and pumping mains), with a range of fittings from Plasson also available.
Show sidebar
Show 16 22 44 All

    50mm Blue MDPE Water Pipe

    £64.13
    To supply clean water. 12 bar pressure rating. 40mm internal diameter. Coil sizes: 25m, 50m, 100m, 150m.

    50mm Black MDPE Water Pipe

    £64.13
    UV stable. Widely used as a water main above ground, or an irrigation pipe below ground.12 bar pressure rating. 40mm internal diameter. Coil sizes: 25m, 50m, 100m.

    Pipe Liner (50mm)

    £0.85
    For use with 50mm water pipe fittings. Designed to withstand working pressures of up to 16bar.

    Coupling (50mm)

    £17.25
    For joining 50mm (OD) water pipes. Designed to withstand working pressures of up to 16bar.

    90 Degree Tee (50mm)

    £24.65
    90 degree junction for 50mm (OD) PE pipes. Designed to withstand working pressures of up to 16bar.

    90 Degree Elbow (50mm)

    £24.65
    90 degree elbow to suit 50mm (OD) PE pipe. Designed to withstand working pressures of up to 16bar.

    Male Threaded Adaptor (50mm)

    £13.15
    Compression fitting for 50mm (OD) PE pipe with a Male BSP threaded connection. Designed to withstand working pressures of up to 16bar.

    Female Threaded Adaptor (50mm)

    £16.20
    Compression fitting for 50mm (OD) PE pipe with a Female BSP threaded connection. Designed to withstand working pressures of up to 16bar.

    Mains Stop Valve (50mm)

    £49.38
    The first WRAS approved high performance non metallic mains stop valve. With 1 1/2" BSP female threads, requires 2 x BSP Male Thread Adaptor 50mm x 1 1/2" for connction...

    End Plug (50mm)

    £14.80
    Terminal fitting for 50mm (OD) water pipe. Your water authority may specify one of these to be fitted on a water pipe tail before they will connect. Designed to withstand...

    Plass4 Universal Coupler (50mm)

    £34.75
    A universal pipe fitting to connect 50mm (OD) metric polyethylene to a wide range of pipe types with an outside diameter between 35 and 50mm. Ideal for conncting to imperial...

    Reducing Set (50mm)

    £6.98
    Conversion kit for use with 50mm Plasson compression fittings to enable connection to either 32mm (OD) or 25mm (OD) size pipe. Designed to withstand working pressures of up to 16bar.

    Blanking Plug (50mm)

    £3.50
    Plug to be inserted into 50mm Plasson fittings to prevent water flow. Can be removed at a later time for future connection. Designed to withstand working pressures of up to 16bar.

    Plasson Wrench (40-75mm)

    £33.10
    Wrench for ease of installation of Plasson fittings. Suitable for 40mm, 50mm, 63mm and 75mm Plasson mechanical fittings.
    Scroll To Top

    #title#

    #price#
    ×