- No products in the cart.
A range of mechanical fittings from Plasson for use with 63mm (outside diameter) Medium-density polyethylene (MDPE) water pipe.
Close
63mm Blue MDPE Water Pipe
SC80 (PE80) Polyethylene Light Blue Pipe for the supply of clean water.
12 bar pressure rating (SDR11)
Outside diameter 63mm (51mm internal)
Available in Coil sizes: 25m, 50m, 100m
Pipe Liner (63mm)
For use with 63mm water pipe fittings. Designed to withstand working pressures of up to 16bar.
Coupling (63mm)
For joining 63mm (OD) water pipes.
Designed to withstand working pressures of up to 16bar.
End Plug (63mm)
Terminal fitting for 63mm (OD) water pipe. Your water authority may specify one of these to be fitted on a water pipe tail before they will connect. Designed to withstand...
Mains Stop Valve (63mm)
The first WRAS approved high performance non metallic mains stop valve. With 2" BSP female threads, requires 2 x BSP Male Thread Adaptor 63mm x 2" for connction to 63mm...
90 Degree Elbow (63mm)
90 degree elbow to suit 63mm (OD) PE pipe. Designed to withstand working pressures of up to 16bar.
90 Degree Tee (63mm)
90 degree junction for 63mm (OD) PE pipes. Designed to withstand working pressures of up to 16bar.
BSP Male Threaded Adaptor (63mm)
Compression fitting for 63mm (OD) PE pipe with a Male BSP threaded connection. Designed to withstand working pressures of up to 16bar.
BSP Female Threaded Adaptor (63mm)
Compression fitting for 50mm (OD) PE pipe with a Female BSP threaded connection. Designed to withstand working pressures of up to 16bar.
2 Inch Double Check Valve (63mm)
Kiwa UK Water Reg4 approved double check valve. With 2 inch female threaded connection. Requires 2no. 63mm Male Thread Adaptor x 2 inch for connection to 63mm water pipe.
Blanking Plug (63mm)
Plug to be inserted into 63mm Plasson fittings to prevent water flow. Can be removed at a later time for future connection. Designed to withstand working pressures of up to 16bar.
Close
Reducing Set (63mm)
Conversion kit for use with 63mm Plasson compression fittings to enable connection to either 50mm (OD), 32mm (OD) or 25mm (OD) size pipe. Designed to withstand working pressures of up to 16bar.
Plasson Wrench (40-75mm)
Wrench for ease of installation of Plasson fittings. Suitable for 40mm, 50mm, 63mm and 75mm Plasson mechanical fittings.
Squeeze Off Tool 32-63mm
Squeeze off tool for clamping MDPE pipe shut whilst work is carried out on it. Suitable for use on 32mm, 50mm & 63mm diameter MDPE.