- No products in the cart.
Male Threaded Adaptor (32mm)
Compression fitting for 32mm (OD) PE pipe with a 1 inch Male BSP threaded connection. Designed to withstand working pressures of up to 16bar.
Squeeze Off Tool 32-63mm
Squeeze off tool for clamping MDPE pipe shut whilst work is carried out on it. Suitable for use on 32mm, 50mm & 63mm diameter MDPE.
Close
Copper Pipe Adaptor Set (25mm)
Simply insert into fitting to join 25mm (OD) PE pipe to above ground (Table X) or below ground (Table Y) copper pipe.
Available to join 25mm (OD) PE to either 15mm or 22mm Copper
End Plug (25mm)
Terminal fitting for 25mm (OD) water pipe. Your water authority may specify one of these to be fitted on a water pipe tail before they will connect. Designed to withstand...
Close
Reducing Collar (32mm)
For joining 32mm (OD) PE pipe to either 25mm (OD) or 20mm (OD) PE pipe. Designed to withstand working pressures of up to 16bar.
Pipe Liner (63mm)
For use with 63mm water pipe fittings. Designed to withstand working pressures of up to 16bar.
DZR Brass Stop Tap (25mm)
WRAS approved stop tap for above & below ground use with 25mm (OD) pipework. Designed to withstand working pressures of up to 16bar.
Male Threaded Adaptor (25mm)
Compression fitting for 25mm (OD) PE pipe with a 3/4 inch Male BSP threaded connection. Designed to withstand working pressures of up to 16bar.
BSP Male Threaded Adaptor (63mm)
Compression fitting for 63mm (OD) PE pipe with a Male BSP threaded connection. Designed to withstand working pressures of up to 16bar.
Close
Plass4 Universal Coupler (32mm)
A universal pipe fitting to connect 32mm (OD) metric polyethylene to a wide range of pipe types: including imperial polyethylene (alkathene), copper (table X & Y), lead, galvanised steel, PVCu...
Close
Female Threaded Adaptor (32mm)
Compression fitting for 32mm (OD) PE pipe with a Female BSP threaded connection. Designed to withstand working pressures of up to 16bar. Available in 2 different BSP thread sizes: 3/4 inch or...
1½ Inch Double Check Valve (50mm)
Kiwa UK Water Reg4 approved double check valve. With 1½ inch female threaded connection. Requires 2no. 50mm Male Thread Adaptor x 1½ inch for connection to 50mm water pipe.
2 Inch Double Check Valve (63mm)
Kiwa UK Water Reg4 approved double check valve. With 2 inch female threaded connection. Requires 2no. 63mm Male Thread Adaptor x 2 inch for connection to 63mm water pipe.
¾ Inch Double Check Valve (25mm)
Kiwa UK Water Reg4 approved double check valve. With ¾ Inch female threaded connection. Requires 2no. 25mm Male Thread Adaptor x ¾ Inch for connection to 25mm water pipe.
Wall Plate Elbow (25mm)
DZR brass bodied fitting for connection to 20mm MDPE with ¾ inch female BSP thread for connection to ¾ inch bib tap.
Squeeze Off Tool 20-32mm
Squeeze off tool for clamping MDPE pipe shut whilst work is carried out on it. Suitable for use on 20mm, 25mm & 32mm diameter MDPE.